IKEA FLIKBOK 105.552.21 Picture Frame instructions manual

The IKEA FLIKBOK 105.552.21 is a versatile picture frame designed for easy assembly and display of your favorite photos or artwork. It features a simple, modern design suitable for various room styles, with a secure backing system for easy photo changes. Below are key sections for safety, assembly, usage, care, and troubleshooting.

1. Package Contents 2. Assembly Instructions 3. Mounting & Placement 4. Specifications 5. Inserting & Changing Photos 6. Care & Cleaning 7. Safety Information 8. Troubleshooting

Package Contents

Before assembly, verify all parts are present and undamaged.

Part	Quantity	Description
Frame front	1	Main frame with glass/acrylic cover
Frame back	1	Back panel with hanging hardware
Stand leg	1	For tabletop display (if included)
Mounting hardware	1 set	Screws and wall anchors (if included)
Instruction manual	1	This document

Note: Some models may vary. Check packaging for specific contents.

Assembly Instructions

Follow these steps for quick and safe assembly.

Lay the frame front face down on a soft, clean surface to prevent scratches.
Place your photo or artwork against the back of the frame front, ensuring it is centered.
Align the frame back with the front, ensuring all edges match.
Secure the back by pressing the metal or plastic clips around the perimeter until they snap into place.
If included, attach the stand leg to the back according to the marked position.

WARNING! Handle glass or acrylic cover with care to avoid breakage or injury.

Mounting & Placement

Choose between wall mounting or tabletop display.

Wall Mounting: Use included hardware. Mark wall, drill holes, insert anchors, and screw in securely. Hang frame on hooks.
Tabletop Display: Attach stand leg (if included) and place on a stable, level surface.
Ensure the frame is away from direct sunlight, heat sources, or high humidity to prevent damage.

CAUTION! For wall mounting, ensure wall can support frame weight. Use appropriate tools.

Specifications

Model: FLIKBOK 105.552.21
Frame Size: [Insert dimensions, e.g., 8x10 inches]
Photo Size: [Insert dimensions, e.g., 5x7 inches]
Material: Wood/composite frame, glass/acrylic cover
Color: As per product variant
Weight: [Insert approximate weight]
Orientation: Portrait or landscape (as per model)

Inserting & Changing Photos

Changing photos is simple with the secure clip system.

Lay frame face down on a soft surface.
Release the clips around the back by gently pulling them outward.
Remove the back panel and existing photo.
Insert new photo, ensuring it is centered and right-side up.
Replace back panel and secure all clips until they snap closed.

Tip: Use clean, dry hands to avoid smudges on photo or glass.

Care & Cleaning

Proper care ensures long-lasting appearance.

Dust regularly with a soft, dry cloth.
For smudges on glass/acrylic, use a slightly damp cloth with mild soap, then dry immediately.
Avoid abrasive cleaners, chemicals, or excessive moisture.
Do not spray liquids directly onto the frame.

CAUTION! Never use harsh chemicals; they may damage the frame surface or cover.

Safety Information

Keep frame away from children’s reach to avoid tipping or breakage.
Ensure wall mounting is secure to prevent falling.
Do not place near open flames or heat sources.
If glass breaks, handle with care and dispose of properly.

WARNING! Glass can break; handle with care during assembly and cleaning.

Troubleshooting

Issue	Possible Cause	Solution
Frame won't close	Clips misaligned or photo too large	Re-align back panel; trim photo if necessary.
Frame wobbles on table	Uneven surface or loose stand	Place on level surface; tighten stand attachment.
Photo appears crooked	Photo not centered	Reopen frame and reposition photo.
Dust behind glass	Dust trapped during assembly	Disassemble and clean photo and glass before reassembly.
Wall mounting fails	Weak wall or incorrect hardware	Use appropriate wall anchors; ensure wall can support weight.

Need Help? Visit IKEA support at www.ikea.com or contact your local store.