IKEA FJÄLLBO 705.107.72 Side Table instructions manual

The IKEA FJÄLLBO 705.107.72 is a side table featuring a black steel frame with a smoked glass top, combining industrial design with practical functionality. It is part of the FJÄLLBO series, characterized by its sturdy metal construction and natural materials. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Care & Maintenance 6. Product Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Check packaging materials thoroughly.

Part Number	Description	Quantity
100001	Side table frame (black steel)	1
100002	Smoked glass top	1
100003	Leg leveling foot	4
700001	Hex key (Allen wrench)	1
800001	Screw pack (M6 x 12mm)	8
800002	Protective felt pad	4

NOTE: Contact IKEA if any parts are missing. Do not attempt assembly with incomplete parts.

Tools Required

Only the provided hex key is needed. No additional tools are required for assembly.

Included: 1 x Hex key (Allen wrench).
Optional: Soft cloth for handling glass, clean flat surface for assembly.

CAUTION! Do not use power tools as they may overtighten and damage the parts.

Safety Instructions

Read all instructions before beginning assembly. Ensure a safe environment.

Work Area: Assemble on a clean, soft, flat surface to prevent scratches.
Glass Handling: The glass top is heavy and fragile. Lift with care using two people. Wear gloves if possible.
Children & Pets: Keep away from assembly area to avoid injury or part loss.
Inspect Parts: Check for damage. Do not assemble if parts are bent, cracked, or defective.
Stability: After assembly, ensure the table is stable on the floor. Adjust leveling feet if necessary.

WARNING! The glass top can break if dropped or impacted. Handle with extreme care.

Assembly Steps

Follow these steps in order. Do not fully tighten screws until the final step.

Prepare Frame: Place the steel frame upside down on a protected surface.
Attach Leveling Feet: Screw the four leveling feet into the bottom of each leg. Hand-tighten only.
Turn Frame Upright: Carefully flip the frame right-side up.
Position Glass Top: With assistance, lift the glass top and center it onto the frame.
Secure Glass: Using the provided screws and hex key, secure the glass top to the frame brackets. Tighten evenly and securely, but do not overtighten.
Attach Felt Pads: Peel and stick one protective felt pad to the bottom of each leveling foot.
Final Check: Ensure all connections are tight. Gently rock the table to check stability. Adjust leveling feet as needed.

Tip: For easier alignment, place the glass top on the frame before attaching any screws.

Care & Maintenance

Proper care will maintain the appearance and longevity of your side table.

Glass Top: Clean with a soft, damp cloth and a mild, non-abrasive glass cleaner. Dry immediately with a lint-free cloth.
Steel Frame: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or steel wool.
Protection: Use coasters under drinks and avoid placing hot items directly on the glass surface.
Moving: Lift the table; do not drag it across the floor, as this may damage the feet or floor.

CAUTION! Never use ammonia-based cleaners on the smoked glass, as they may damage the finish.

Product Specifications

Article Number: 705.107.72
Series: FJÄLLBO
Design: Black steel frame with smoked glass top
Dimensions (LxWxH): 55 cm x 55 cm x 45 cm (21 5/8" x 21 5/8" x 17 3/4")
Weight: 8.5 kg (18.7 lb)
Max Load: 25 kg (55 lb) evenly distributed
Materials: Steel, Glass
Color: Black/Brown glass
Additional Features: Adjustable leveling feet for stability on uneven floors

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor or unadjusted feet	Adjust the leveling feet by twisting until the table is stable.
Glass top feels loose	Screws not fully tightened	Check and tighten all screws connecting the glass to the frame with the hex key.
Scratches on frame during assembly	Assembly on hard surface	Always assemble on a soft, protected surface like a carpet or blanket.
Difficulty aligning glass	Frame not on level surface	Ensure the frame is upright and on a flat surface before placing the glass top.
Missing hardware	Packaging error	Refer to the Parts List. Contact IKEA customer service for replacement parts.

Warranty & Support

This IKEA product is covered by the IKEA Limited Warranty. For details, refer to the IKEA warranty booklet included with your purchase or visit www.ikea.com.

Customer Support:
Website: www.ikea.com
Phone: 1-888-888-4532 (IKEA US)
For spare parts or assembly assistance, visit your local IKEA store or the website.

Recycling: At end of life, disassemble and recycle materials according to your local regulations. Glass, metal, and plastic components may be recyclable.