IKEA FJÄLLBO 204.735.93 Shelf instructions manual

The IKEA FJÄLLBO 204.735.93 is a wall-mounted shelf unit with a black steel frame and dark stained ash veneer shelves, featuring an industrial design with visible screws. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, mounting, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Mounting Instructions 6. Weight Capacity & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Number	Description	Quantity
10073593	Steel frame (black)	1
20073594	Ash veneer shelf (dark stained)	2
30073595	Wall mounting bracket	2
40073596	Screw pack (wood screws, wall anchors, bolts)	1 set
50073597	Allen key (included tool)	1

Tools Required

Tools not included that you will need:

Phillips screwdriver
Drill (for wall mounting)
Level
Pencil
Stud finder (recommended)

Safety Instructions

WARNING! Failure to follow these instructions may result in serious injury or damage.

Two-person assembly: The shelf is heavy; have someone assist you.
Secure mounting: Always mount to wall studs or use appropriate wall anchors for your wall type (drywall, concrete, etc.).
Weight limit: Do not exceed maximum load capacity (see Specifications).
Child safety: Do not allow children to climb on the shelf.
Check stability: Ensure the unit is level and securely fastened before use.

Assembly Steps

Follow these steps in order. Do not fully tighten screws until all parts are aligned.

Lay out frame: Place the steel frame on a soft, protected surface to avoid scratches.
Attach shelves: Position the two ash veneer shelves onto the frame brackets. Align the pre-drilled holes.
Insert screws: Using the included Allen key, insert and hand-tighten the screws through the frame into the shelves. Do not overtighten.
Final tightening: Once all screws are in place and shelves are level, fully tighten all screws securely.
Attach mounting brackets: Secure the two wall mounting brackets to the back of the steel frame using the provided bolts.

Tip: Keep the assembly on the floor until you are ready to mount it on the wall.

Wall Mounting Instructions

This is a critical step for safety. Mounting into wall studs is strongly recommended.

Locate studs: Use a stud finder to locate at least two wall studs where the shelf will be mounted.
Mark bracket positions: Hold the assembled shelf against the wall at the desired height. Use a level to ensure it is perfectly horizontal. Lightly mark the wall through the holes in the mounting brackets.
Pre-drill holes: At the marked points, pre-drill pilot holes into the studs. If not mounting into studs, use appropriate wall anchors for your wall type and drill holes for them.
Secure to wall: Align the mounting brackets with the holes. Insert the provided screws through the brackets and into the wall studs or anchors. Tighten securely with a screwdriver.
Final check: Gently pull on the shelf to confirm it is firmly attached to the wall. Ensure it does not wobble.

CAUTION! Never mount this shelf using only drywall anchors without hitting a stud. The unit can fall if not properly secured.

Weight Capacity & Specifications

Model: FJÄLLBO 204.735.93
Color: Black steel frame, Dark stained ash veneer
Dimensions (W x H x D): 70cm x 90cm x 30cm (approx. 27 1/2" x 35 3/8" x 11 3/4")
Max Load per Shelf: 15 kg (33 lbs)
Total Max Load: 30 kg (66 lbs)
Weight of Unit: 12.5 kg (27.5 lbs)
Material: Steel, Ash veneer, Acrylic paint

Care & Maintenance

To maintain the appearance and longevity of your shelf:

Cleaning: Wipe the steel frame with a dry or slightly damp cloth. For the wood shelves, use a dry, soft cloth. Do not use abrasive cleaners, scouring pads, or harsh chemicals.
Moisture: Avoid placing in areas of high humidity or direct contact with water. Wipe spills immediately from the wood surface.
Sunlight: Prolonged direct sunlight may fade the wood veneer over time.
Tightening: Periodically check that all screws and wall mounts are tight.

Troubleshooting

Issue	Possible Cause	Solution
Shelf is wobbly	Screws not tight; wall mount not secure	Tighten all frame and wall mount screws. Ensure wall anchors/studs are secure.
Shelves not level	Frame assembled incorrectly; wall not level	Disassemble and reassemble frame carefully. Use a level during wall mounting.
Difficulty inserting screws	Holes misaligned	Do not force. Ensure parts are correctly aligned before tightening.
Missing part	Packaging error	Contact IKEA customer service with your product number (204.735.93).
Scratches on finish	Assembly on hard surface	Assemble on a soft blanket or carpet to protect the finish.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty brochure included in the packaging or available at IKEA stores for full terms and conditions.

For assembly help, missing parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the specific product page for the FJÄLLBO series.

Important: Keep your receipt as proof of purchase for warranty claims.