IKEA FJÄLKINGE 199.318.65 with 2 Drawer Chest instructions manual

The IKEA FJÄLKINGE 199.318.65 is a versatile 2-drawer chest designed for bedroom storage. It features a clean, modern design, two smooth-gliding drawers, durable construction, and a finish that complements various decors. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

Parts & Hardware

All components included in the package.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

1. Tip-Over Hazard: Furniture can tip over. Always use the included wall attachment device to secure the chest to the wall to prevent serious or fatal tip-over injuries.
2. Lifting: The product is heavy. Use two people for lifting and moving to avoid back injury.
3. Tools: Use only the included Allen key and a Phillips screwdriver. Do not overtighten screws.
4. Surface: Assemble on a soft, clean surface (e.g., carpet or blanket) to avoid scratching the parts.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this chest to the wall.

Assembly Steps

Follow the numerical order shown in the included picture guide.

1. Prepare: Unpack all parts and hardware. Check against the parts list. Lay out parts on a soft surface.
2. Frame Construction: Connect the left and right side panels to the bottom panel using the cam locks and dowels. Ensure all cam locks are turned to the locked position (a click may be heard).
3. Attach Back Panel: Place the back panel into the grooves on the side and bottom panels. Secure with the provided screws.
4. Install Top Panel: Position the top panel onto the assembled frame. Secure from underneath using the cam lock system or screws as indicated.
5. Install Drawer Runners: Attach the drawer runner halves to the inside of the cabinet sides according to the markings. Ensure they are level and at the same height on both sides.
6. Assemble Drawers: Connect the drawer sides to the drawer front and back using the cam locks. Insert the drawer bottom into the grooves and secure.
7. Attach Drawer Handles (if applicable): Screw handles into the pre-drilled holes on the drawer fronts.
8. Insert Drawers: Attach the remaining halves of the drawer runners to the drawer boxes. Carefully align and slide the drawers into the cabinet.

Tip: Do not fully tighten all screws until the entire structure is assembled to allow for minor adjustments.

Product Specifications

• Product Name: FJÄLKINGE
• Article Number: 199.318.65
• Color/Finish: As specified on packaging (e.g., White, Black-Brown, etc.)
• Material: Particleboard, Fiberboard, Plastic, Metal
• Dimensions (Assembled): Height: XX cm, Width: XX cm, Depth: XX cm
• Drawer Dimensions: Interior dimensions for each drawer.
• Max Load per Drawer: XX kg (as indicated in manual)
• Weight (Net): XX kg
• Package(s): 1

Drawer Installation & Adjustment

Ensuring smooth drawer operation.

1. After inserting the drawer, open and close it to test the glide.
2. If the drawer is uneven or sticks, check that the runner halves are securely attached and aligned.
3. Most runners have a small lever or tab for removal. To adjust, press the lever and pull the drawer out.
4. Re-insert by aligning the runner and pushing firmly until it clicks into place.
5. Some models feature a stop mechanism to prevent the drawer from being pulled all the way out accidentally.

Note: Do not overload drawers beyond the specified weight limit to ensure longevity and smooth operation.

Care & Maintenance

To keep your chest looking new.

• Cleaning: Wipe with a damp cloth and a mild detergent. Dry immediately with a clean, soft cloth.
• Avoid: Abrasive cleaners, scouring pads, solvents, or ammonia-based products.
• Protection: Use coasters under drinks and avoid placing hot items directly on the surface.
• Environment: Avoid prolonged exposure to direct sunlight, high humidity, or heat sources.

CAUTION! Never soak the furniture or allow liquid to pool on surfaces or enter seams.

Wall Attachment

THIS STEP IS MANDATORY FOR SAFETY.

1. Decide on the final placement of the chest against the wall.
2. Locate the wall stud(s) using a stud finder. The chest must be anchored into solid wood or masonry.
3. Attach the provided wall bracket(s) to the back of the chest in the indicated, pre-drilled locations.
4. Position the chest against the wall. Mark the screw holes for the bracket on the wall through the bracket.
5. Move the chest aside. Drill pilot holes into the wall stud(s) at the marked locations.
6. Place the chest back in position. Secure the bracket to the wall using the provided screws and wall plugs (if needed for drywall/masonry). Ensure it is tight and secure.
7. Gently test the stability of the chest.

Troubleshooting

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details specific to your country.

IKEA Customer Support:
Website: www.ikea.com
Phone: 1-800-434-IKEA (4532) - US
For spare parts, visit the "Spare Parts" section online or in-store.

Recycling: At the end of its life, disassemble and recycle materials according to your local regulations. Many IKEA stores offer take-back programs.