IKEA FISKBO 002.956.53 Picture Frame instructions manual

The IKEA FISKBO 002.956.53 is a versatile picture frame designed for displaying photos and artwork. It features a simple, clean design suitable for various room styles, with a sturdy cardboard frame, transparent plastic front, and a built-in stand for tabletop display or wall mounting options. Below are key sections for assembly, usage, care, and troubleshooting.

1. Package Contents & Parts 2. Assembly Instructions 3. Mounting & Display Options 4. Specifications 5. Inserting & Changing Pictures 6. Care & Cleaning 7. Safety Information 8. Troubleshooting

Package Contents & Parts

Before assembly, check that you have all parts listed below.

Part Description	Quantity	Notes
Cardboard Frame (Front & Back)	1 set	Pre-folded, printed design
Transparent Plastic Front Sheet	1	Protects the picture
Stand Leg (Integrated)	1	Attached to back panel
Wall Mounting Template (if included)	1	For hanging alignment
Instruction Sheet (this manual)	1

NOTE: Frame is designed for standard photo sizes. Ensure your picture matches the frame dimensions.

Assembly Instructions

Follow these steps to assemble your FISKBO frame. No tools required.

Unfold the Frame: Gently separate the front and back cardboard panels.
Insert Plastic Sheet: Place the transparent plastic sheet into the front panel groove.
Place Your Picture: Insert your photo or artwork behind the plastic sheet, facing forward.
Close the Frame: Align the back panel and press the edges firmly until they snap closed on all sides.
Secure the Stand: Fold out the integrated stand leg from the back panel until it locks into position.

CAUTION! Handle the cardboard edges carefully to avoid bending or tearing.

Mounting & Display Options

The FISKBO frame offers two primary display methods.

Tabletop Display: Use the built-in stand. Ensure the frame is on a flat, stable surface.
Wall Mounting:
- Use the pre-cut hanging hole on the back panel.
- Use a small nail or picture hook suitable for the frame's weight.
- For precise alignment, use the included paper template (if provided) to mark hole positions.

Tip: For wall mounting, ensure the hook or nail is securely anchored, especially on plasterboard walls.

Specifications

Model: FISKBO 002.956.53
Frame Material: Sturdy cardboard with printed finish.
Front Cover: Transparent plastic.
Display Options: Tabletop stand (integrated) and wall mounting hole.
Intended Photo Size: Please check frame dimensions for exact fit (e.g., 10x15 cm, 13x18 cm).
Weight: Lightweight design.
Color/Design: As per product variant (e.g., white, black, pattern).

Inserting & Changing Pictures

To change the displayed picture, follow these steps:

Lay the frame face down on a soft, clean surface.
Gently pry open the cardboard clips or edges on one side of the frame.
Carefully remove the back panel and the old picture.
Insert the new picture behind the plastic front sheet, ensuring it is centered.
Replace the back panel and press all edges firmly until securely closed.

WARNING! Do not use excessive force when opening the frame to avoid damaging the cardboard.

Care & Cleaning

To maintain your frame's appearance:

Dust regularly with a soft, dry cloth.
For the plastic front, use a slightly damp cloth if needed, then wipe dry. Do not use chemicals or abrasive cleaners.
Keep the frame away from direct sunlight, excessive moisture, and heat sources to prevent warping or fading.

CAUTION! Do not immerse the frame in water or use liquid cleaners directly on the cardboard.

Safety Information

This is a decorative item, not a toy. Keep away from children under 3 years due to small parts risk.
For wall mounting, ensure the fixing is suitable for the wall material and can support the frame's weight.
Do not place near open flames or high-temperature appliances.
Dispose of packaging material properly to avoid suffocation hazards.

Troubleshooting

Issue	Possible Cause	Solution
Frame won't stay closed	Edges not fully pressed together; picture too thick	Ensure picture lies flat; press all edges firmly from the center outward. Use a standard photo thickness.
Stand is wobbly	Stand leg not fully extended or locked	Check that the stand leg is folded out completely until it clicks into place.
Frame leans forward/backward on table	Surface not level; stand not properly angled	Place on a level surface. Adjust the angle of the stand gently.
Difficulty changing picture	Edges are tight	Use a thin, flat object like a butter knife to gently pry open one corner, then work around the edge.
Plastic front is scratched	Abrasive cleaning or contact with sharp objects	Minor scratches may be less visible when a picture is inserted. Prevent future scratches by handling carefully.

Need more help? Visit IKEA's website at www.ikea.com or contact your local IKEA store.