IKEA FINNALA 495.051.69 Armrest instructions manual

The IKEA FINNALA 495.051.69 Armrest is a replacement or additional armrest component designed for compatibility with specific FINNALA sofa models. It features a sturdy construction, integrated attachment mechanisms, and upholstery matching the FINNALA series. Below are key sections for safety, parts identification, assembly, installation, care, and troubleshooting.

Parts Identification

Key components included in the package: Armrest panel, Mounting brackets, Screws, Allen key, Cover caps.

Safety Information

Read all instructions before assembly. Ensure a clean, spacious work area.

1. Keep small parts away from children to avoid choking hazards.
2. Use the provided tool only; do not overtighten screws.
3. Assemble on a soft surface to prevent scratches or damage.
4. Verify all connections are secure before use.

WARNING! The armrest must be properly attached to the sofa frame to ensure stability and prevent tipping. Do not use excessive force during assembly.

Tools Required

Only the included Allen key is required. No additional tools are needed.

• Included: Allen key (size 4mm).
• Optional: Soft mallet for alignment (not required).

CAUTION! Using incorrect tools may damage the parts or void the warranty.

Assembly & Installation

Follow these steps to prepare the armrest for attachment.

1. Unpack all parts and verify against the parts list.
2. Identify left and right mounting brackets (marked L/R).
3. Attach brackets to the armrest panel using the provided screws and Allen key.
4. Ensure brackets are flush and screws are snug but not overtightened.
5. Place cover caps over screw heads for a finished look.

Tip: Lay the armrest panel face down on a soft blanket during bracket attachment.

Attachment to Sofa Frame

Attaching the assembled armrest to your FINNALA sofa.

1. Locate the pre-drilled mounting points on the sofa frame.
2. Align the armrest brackets with the mounting points.
3. Insert and hand-tighten the mounting screws through the brackets into the frame.
4. Use the Allen key to fully tighten all screws securely.
5. Check stability by applying gentle pressure to the armrest.

WARNING! Ensure the sofa is on a level surface during installation. Two people are recommended for easier alignment.

Adjustment & Alignment

Fine-tuning the armrest position for a perfect fit.

If the armrest does not sit flush:

• Loosen the screws slightly, reposition the armrest, and retighten.
• Check that no upholstery or fabric is caught in the joint.
• Ensure the sofa frame is not obstructed by other modules.

Note: Minor gaps (1-3mm) may be visible due to manufacturing tolerances and are normal.

Care & Maintenance

To clean the upholstered armrest, use a soft brush or vacuum with a soft brush attachment. For spills, blot immediately with a clean, damp cloth. Do not rub.

CAUTION! Do not use harsh chemicals, abrasive cleaners, or steam cleaners. Test any cleaner on an inconspicuous area first.

Compatibility Information

This armrest (Article Number 495.051.69) is designed for use with the following FINNALA series models:

• FINNALA sofa modules (specific compatible models listed on IKEA website).
• Not compatible with other IKEA sofa series.

Verify your sofa model number before purchase or installation.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty terms for details. For missing parts or assembly support, contact IKEA customer service or visit your local IKEA store.

IKEA Customer Support: Visit www.ikea.com or call the number listed on your receipt or the IKEA website.

Troubleshooting

Reassembly: If disassembling, keep all parts together. Follow instructions in reverse order.

Service: For issues not resolved above, contact IKEA support.