IKEA FINNALA 193.192.63 Chaise instructions manual

The IKEA FINNALA 193.192.63 is a modular chaise lounge section designed to be combined with other FINNALA sofa components. It features a sturdy wooden frame, high-resilience foam cushions, removable and washable covers, and adjustable feet for stability on uneven floors. Below are key sections for safety, assembly, use, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Attaching to Other FINNALA Sections 5. Using the Chaise 6. Care & Maintenance 7. Specifications 8. Warranty Information 9. Troubleshooting

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Chaise frame, armrest panel, seat cushions, back cushions, legs with adjustable feet, connectors, cover fabric.

Part Number	Description	Quantity
100001	Chaise main frame	1
100002	Armrest panel (left or right)	1
100003	Seat cushion (high-resilience foam)	1
100004	Back cushion	1
100005	Leg with adjustable foot	4
100006	Connector bolts and washers	Set
100007	Allen key (tool)	1
100008	Cover (removable)	1 set

Safety Instructions

Read all instructions before assembly and use.

Assembly requires two people due to size and weight.
Assemble on a soft surface (e.g., carpet) to avoid scratching parts.
Ensure all bolts and connectors are tightened securely.
Check stability before first use.
Do not stand or jump on the chaise.
Maximum load: 330 lbs (150 kg) distributed evenly.
Keep away from direct heat sources and prolonged sunlight.

WARNING! Improper assembly can lead to instability and risk of injury. Follow steps precisely.

Step-by-Step Assembly

Estimated assembly time: 45-60 minutes.

Attach legs: Turn frame upside down on a protected surface. Screw the four legs into the pre-drilled holes on the frame base. Hand-tighten, then use the Allen key to secure.
Install armrest: Align the armrest panel with the side of the frame. Insert the connector bolts through the holes. Tighten with the Allen key.
Place cushions: Position the seat cushion onto the frame. Place the back cushion against the armrest and back of the frame.
Attach cover: Stretch the fabric cover over the cushions and frame. Secure the cover's fasteners (hooks or zippers) underneath and along the sides.
Adjust feet: Turn the chaise upright. Adjust the feet by twisting to ensure stability on the floor.
Final check: Gently test for wobble. Re-tighten any loose connections.

Tip: Do not fully tighten bolts until all parts are aligned.

Attaching to Other FINNALA Sections

The chaise is designed to connect to FINNALA sofa sections or corner units.

Ensure both the chaise and the adjoining section are on a level surface.
Align the connector brackets located on the inner side of the chaise frame with those on the other section.
Insert the provided locking bolts through the aligned brackets.
Tighten securely with the Allen key to create a stable, seamless join.
Check that there is no significant gap or movement between the units.

Note: The chaise can be attached to either the left or right side, depending on your layout.

Using the Chaise

Positioning: Place on a flat, stable surface. Use felt pads under feet on hardwood floors.
Cushions: Fluff and rotate cushions periodically to maintain shape.
Reclining: This is a fixed chaise lounge; it does not recline mechanically.
Weight limit: Do not exceed the maximum distributed weight of 330 lbs (150 kg).

Care & Maintenance

Fabric Cover: Most FINNALA covers are removable and machine washable (check label for specific instructions). Wash at 104°F (40°C) on gentle cycle. Do not bleach. Tumble dry low or air dry. Iron on low heat if needed.

Frame & Legs: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.

Cushions: Vacuum regularly. Spot clean with a mild detergent and damp cloth. Allow to dry completely.

CAUTION! Never soak the cushions or frame. Do not dry clean unless the label explicitly states it is safe.

Specifications

Article Number: 193.192.63
Dimensions (WxDxH): 35" x 63" x 33" (89cm x 160cm x 84cm)
Seat Depth: 25" (63.5cm)
Seat Height: 17" (43cm)
Frame Material: Solid wood, particleboard, plywood
Fill Material: High-resilience polyurethane foam
Cover Material: Polyester (varies by color option)
Leg Material: Steel, epoxy/polyester powder coating
Weight: 55 lbs (25 kg)
Max Load: 330 lbs (150 kg)

Warranty Information

IKEA warranties vary by country. The FINNALA frame is typically covered by a 10-year limited warranty. Covers and cushions may have a separate warranty period. Proof of purchase is required.

For warranty claims or service, contact your local IKEA store or visit www.ikea.com.

Troubleshooting

Issue	Possible Cause	Solution
Chaise wobbles	Uneven floor; legs not adjusted; loose bolts	Adjust the feet individually. Check and tighten all frame and leg connections.
Cushions feel flat	Normal settling over time	Fluff and rotate cushions. Over time, foam will adapt to body shape.
Cover is difficult to put on	Cover may be tight initially	Ensure cushions are correctly positioned. Start at one corner and work the cover on gradually.
Squeaking noise	Wood rubbing against wood; loose joints	Check and tighten all bolts. Apply a small amount of furniture wax or felt pad between rubbing surfaces if accessible.
Cannot connect to other section	Connectors misaligned	Loosen bolts on both pieces, align perfectly, then re-tighten.

Missing Parts? Contact IKEA customer service with your article number (193.192.63) and proof of purchase.

Support: Visit www.ikea.com or your local IKEA store.