IKEA FELSISK 404.895.26 Lighting instructions manual

The IKEA FELSISK 404.895.26 is a modern LED lighting fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, multiple color temperature settings (warm white to cool daylight), remote control operation, timer function, and memory function for preferred settings. Compatible with standard E27 sockets and operates on 100-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LED light panel, Remote Control, Power adapter, Mounting bracket, User manual.

Installation

Unpack and inspect all contents. Ensure mounting surface is stable and can support fixture weight.

1. Turn off power: Switch off circuit breaker before installation.
2. Mount bracket: Secure mounting bracket to ceiling or wall using provided screws.
3. Connect wires: Match wire colors (black to black, white to white, green to ground).
4. Attach fixture: Align fixture with bracket and twist to lock in place.
5. Install bulb: Screw LED bulb into E27 socket (if not pre-installed).

WARNING! Ensure power is completely off before installation. Use appropriate safety equipment.

First-Time Setup

After installation, restore power and configure initial settings.

1. Power on: Turn on circuit breaker and use wall switch or remote to power light.
2. Pair remote: Point remote at fixture and press POWER button for 3 seconds to pair.
3. Set default brightness: Use remote to adjust to preferred brightness level.
4. Select color temperature: Cycle through color options to find preferred setting.
5. Test functions: Verify timer, dimming, and memory functions work properly.

CAUTION! Do not exceed maximum wattage rating. Use only with compatible dimmers if dimming function is used.

Specifications

• Model: FELSISK 404.895.26
• Light Source: Integrated LED panel
• Luminous Flux: 1600 lumens
• Power Consumption: 18W (equivalent to 150W incandescent)
• Color Temperature: 2700K-6500K adjustable
• CRI (Color Rendering Index): >80
• Dimming Range: 10%-100%
• Beam Angle: 120 degrees
• Lifespan: 25,000 hours
• Operating Voltage: 100-240V AC, 50/60Hz
• Socket: E27
• Dimensions: 300mm diameter, 80mm height
• Weight: 1.2 kg

Controls and Settings

Primary control via included remote. Wall switch can turn on/off but advanced features require remote.

Remote Functions: POWER ON/OFF, BRIGHTNESS +/- (10 levels), COLOR TEMP (3 presets), TIMER (30/60/120 min), MEMORY (save/recall), RESET.

Light Settings: Brightness (10 levels from 10% to 100%), Color Temperature (Warm White 2700K, Neutral 4000K, Cool Daylight 6500K), Timer Settings (Off, 30min, 60min, 120min).

Memory Function: Automatically saves last used settings. Press MEMORY button to save current settings as default.

Connecting to Power

Connect only to properly grounded electrical outlet with correct voltage.

1. Ensure fixture is properly installed and secured.
2. Verify wall switch is in OFF position.
3. Connect to power source through installed wiring.
4. Turn on circuit breaker.
5. Use wall switch or remote to power on light.

Tip: For dimming functionality, ensure connected to compatible dimmer switch if using wall control.

Using Remote Control

Remote requires 2 AAA batteries (not included). Effective range up to 8 meters.

1. Insert batteries: Open battery compartment, insert AAA batteries with correct polarity.
2. Pair remote: Point at fixture, press POWER for 3 seconds until light blinks.
3. Basic operation: POWER to turn on/off, BRIGHTNESS +/- to adjust light level.
4. Color selection: Press COLOR button to cycle through temperature options.
5. Set timer: Press TIMER, then select duration (30/60/120 min).
6. Save settings: Adjust to preferred settings, press MEMORY to save.
7. Reset: Press and hold RESET for 5 seconds to restore factory settings.

WARNING! Keep remote away from moisture and extreme temperatures. Replace batteries when performance decreases.

Smart Features

Timer Function: Automatically turns off light after set duration. Memory Function: Remembers brightness and color temperature settings between power cycles.

Using Timer: Select duration (30/60/120 min). Light will turn off automatically after selected time. Timer cancels if light is turned off manually.

Using Memory: After setting preferred brightness and color, press MEMORY button. Fixture will use these settings when powered on.

Care & Cleaning

Turn off and disconnect from power before cleaning. Allow to cool if recently used.

1. Use soft, dry cloth to wipe exterior surfaces.
2. For stubborn dirt, use slightly damp cloth with mild detergent.
3. Never immerse fixture in water or use abrasive cleaners.
4. Clean remote with dry cloth only.

CAUTION! Do not use chemical cleaners, solvents, or abrasive materials. Never spray liquids directly onto fixture.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. Energy Class: A+ rating. Warranty: 2-year limited warranty from date of purchase. For warranty claims, retain original receipt. Disposal: Dispose according to local regulations for electronic waste. Do not dispose with household waste. For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

Reset Procedure: Turn off power for 30 seconds, then restore. Or use remote RESET function.

Service: For technical support, contact IKEA customer service or visit www.ikea.com. Warranty service requires proof of purchase.