IKEA FEJAN 505.319.97 Table instructions manual

The IKEA FEJAN 505.319.97 is a versatile table designed for assembly, featuring a modern Scandinavian design, durable materials, and adjustable components for stability. Below are key sections for safety, assembly instructions, parts list, care, and warranty information.

1. Product Overview 2. Safety Instructions 3. Parts & Tools Required 4. Assembly Instructions 5. Adjustments & Leveling 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview

Key features: Solid wood or engineered wood tabletop, metal or wooden legs, adjustable feet for uneven floors, and a protective finish.

Component	Description
Tabletop	Solid wood/engineered wood with protective coating
Legs	Metal or wooden legs with pre-attached hardware
Adjustable feet	For stability on uneven surfaces
Hardware pack	Screws, bolts, and tools included
Protective pads	For floor protection

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

Assemble on a soft surface to avoid scratches.
Keep small parts away from children.
Use correct tools; do not overtighten screws.
Check stability before use.

WARNING! Table is heavy; lift with care. Ensure all connections are secure to prevent tipping.

Parts & Tools Required

Included parts: Tabletop, legs (4), adjustable feet (4), screws, bolts, Allen key.

Tools provided: Allen key.
Additional tools needed: Phillips screwdriver (optional).
Check contents: Verify all parts before starting.

Tip: Lay out parts as shown in the manual for easy access.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Attach legs: Place tabletop upside down on soft surface. Insert legs into pre-drilled holes.
Secure legs: Use provided screws and Allen key to tighten.
Attach adjustable feet: Screw feet into bottom of each leg.
Flip table: Carefully turn table right-side up.
Check stability: Ensure all legs are firmly attached.

CAUTION! Do not overtighten screws to avoid damaging wood.

Adjustments & Leveling

Use adjustable feet to level table on uneven floors.

Place table in desired location.
Adjust feet: Turn clockwise to raise, counterclockwise to lower.
Check level: Use a spirit level on tabletop.
Secure feet: Ensure all feet are in contact with floor.

Tip: Adjust feet periodically as floors may shift.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

Daily cleaning: Wipe with dry or damp cloth.
Stain removal: Use mild soap and water; dry immediately.
Protection: Use coasters to prevent heat/water marks.
Avoid: Direct sunlight, heat sources, and excessive moisture.

CAUTION! Do not use abrasive cleaners or solvents.

Specifications

Dimensions: 120 cm (L) x 80 cm (W) x 75 cm (H).
Weight: 15 kg (assembled).
Material: Tabletop: Solid wood/engineered wood; Legs: Metal/wood.
Finish: Protective lacquer or oil.
Load capacity: Max 50 kg evenly distributed.
Warranty: 10-year limited warranty.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor/loose legs	Adjust feet; tighten leg screws.
Legs not fitting	Misaligned holes	Check orientation; align holes properly.
Scratches on surface	Assembly on hard surface	Assemble on soft cloth; use protective pads.
Screws not tightening	Stripped threads	Do not force; contact support for replacement parts.
Finish damage	Chemical exposure	Avoid harsh cleaners; use recommended cleaning methods.

Note: For missing parts, contact IKEA customer service.

Warranty & Support

10-year limited warranty. Covers manufacturing defects.

Warranty terms: Proof of purchase required.
Exclusions: Damage from misuse, improper assembly, or accidents.
Support: Visit www.ikea.com or contact local IKEA store.
Phone: 1-800-434-4532 (IKEA US).

Recycling: Dispose of packaging responsibly; recycle where possible.