IKEA FADO 604.162.80 Table Lamp instructions manual

The IKEA FADO 604.162.80 is a spherical glass table lamp with a minimalist design, featuring a frosted glass shade, a metal base, and an integrated E14 socket. It operates with a maximum 40W bulb (not included), uses standard 220-240V AC power, and includes an on/off switch on the cord. Below are key sections for safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Safety Information 8. Care & Cleaning 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Frosted glass spherical shade, Metal base, E14 lamp socket, On/off switch on cord, Power cord with plug.

Feature	Description
Glass Shade	Frosted spherical glass for diffused, soft lighting
Metal Base	Sturdy base providing stability
Lamp Socket	E14 socket (small Edison screw)
Maximum Wattage	40W maximum (bulb not included)
Power Supply	220-240V AC, 50/60Hz
Switch	On/off switch located on the power cord
Dimensions	Approx. 18 cm diameter, 25 cm height
Weight	Approx. 1.2 kg

Assembly Instructions

Unpack all parts and check contents. Ensure you have a compatible E14 bulb (max 40W).

Place the metal base on a flat, stable surface.
Screw the E14 bulb (not included) into the socket. Do not exceed 40W.
Carefully place the glass shade over the bulb and align it with the base.
Gently press down until the shade sits securely on the base. Do not force.

WARNING! The glass shade is fragile. Handle with care to avoid breakage and injury.

Installation & Setup

Choose a suitable location before plugging in the lamp.

Select Location: Place on a stable, level, and heat-resistant surface away from edges.
Power Connection: Plug the cord into a standard 220-240V wall outlet.
Operation Test: Use the switch on the cord to turn the lamp on and off.
Adjustment: Ensure the lamp is not in contact with curtains, bedding, or other flammable materials.

CAUTION! Ensure the lamp is unplugged during assembly and bulb replacement.

Specifications

Model: FADO 604.162.80
Type: Table Lamp
Material: Glass shade, Metal base
Socket: E14 (small Edison screw)
Max Bulb Wattage: 40W
Voltage: 220-240V AC, 50/60Hz
Dimensions (approx.): Ø 18 cm x H 25 cm
Weight: Approx. 1.2 kg
Light Output: Depends on bulb used (warm white recommended)

Controls and Operation

The lamp is operated solely via the on/off switch on the power cord.

Operation: Press the switch to turn the lamp ON. Press again to turn OFF.

Note: There are no brightness or color temperature controls on the lamp itself. Light quality depends on the bulb installed.

Recommended Use: For ambient lighting in living rooms, bedrooms, or offices. Not intended for task lighting or outdoor use.

Bulb Replacement

Always turn off and unplug the lamp before replacing the bulb.

Allow the bulb to cool completely if it was recently on.
Gently lift and remove the glass shade. Place it on a soft surface.
Unscrew the old bulb counterclockwise.
Screw in a new E14 bulb (max 40W) clockwise until snug. Do not overtighten.
Carefully place the glass shade back onto the base.
Plug in the lamp and test with the switch.

WARNING! Use only E14 bulbs with a maximum rating of 40W to prevent overheating and damage.

Safety Information

This appliance can be used by children aged from 8 years and above and persons with reduced capabilities if they have been given supervision or instruction concerning use in a safe way and understand the hazards involved.

Always unplug before cleaning, maintenance, or bulb replacement.
Do not use the lamp if the cord or plug is damaged.
Do not place the lamp near water sources or in humid environments (bathrooms).
Do not cover the lamp with cloth or other materials while in use.
The lamp becomes warm during use. Keep away from flammable materials.
Use only with the specified voltage (220-240V).

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Glass Shade: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
Metal Base: Wipe with a soft, dry cloth.
Cord: Wipe with a dry cloth. Do not immerse in water.

CAUTION! Never spray liquids directly onto the lamp. Do not use harsh chemicals.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on the IKEA website.

For spare parts, assembly help, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for warranty details.

This product complies with applicable EU directives and standards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check if outlet works; ensure lamp is plugged in; replace bulb; check switch.
Bulb flickers or dim	Loose bulb / Faulty bulb / Wrong bulb type	Turn off, unplug, and reseat bulb; try a new bulb; ensure it's E14 and ≤40W.
Lamp gets very hot	Bulb wattage too high / Ventilation blocked	Immediately turn off and unplug. Replace with a bulb of 40W or less. Ensure shade is properly seated.
Glass shade is loose	Not seated correctly on base	Turn off and unplug. Remove shade and reposition it evenly on the base.
Switch does not work	Switch mechanism faulty	Do not attempt to repair. Contact IKEA support for assistance or replacement.

Disposal: Dispose of the lamp and bulbs according to local electronic waste regulations. Do not dispose of with household waste.

Support: www.ikea.com