IKEA FÖRNEBO 705.377.57 Cooktop instructions manual

The IKEA FÖRNEBO 705.377.57 is a modern induction cooktop featuring four cooking zones with touch controls, a sleek glass-ceramic surface, safety features like child lock and residual heat indicators, automatic pan detection, power boost function, timer, and automatic shut-off. Designed for built-in installation in standard 60cm countertops. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Glass-ceramic surface, Touch control panel, Four induction cooking zones, Residual heat indicators, Power Boost function, Timer.

Installation

Unpack and inspect contents. Ensure countertop cutout matches dimensions.

1. Prepare countertop: Cut a 560mm x 490mm opening (verify with manual).
2. Secure mounting brackets: Attach to underside of cooktop.
3. Place cooktop: Lower into cutout, ensuring it sits level and flush.
4. Electrical connection: Must be performed by a qualified electrician.
5. Secure with clips: Use provided clips to fasten cooktop to countertop.

WARNING! Installation must comply with local electrical codes. Disconnect power before installation. The glass surface is fragile; handle with care.

First-Time Setup

After installation, power on the cooktop; follow initial setup.

1. Initial power on: Connect to power supply. A short beep confirms power.
2. Unlock controls: If child lock is active by default, press and hold lock symbol for 3 seconds.
3. Test zones: Place a compatible pan on a zone. The zone indicator should light up.
4. Set clock: Press and hold timer button to set current time (if applicable).
5. Familiarize with touch controls: Gently tap symbols; do not use sharp objects.

CAUTION! Ensure the cooktop is properly installed and ventilated. Keep packaging away from children.

Specifications

• Model: IKEA FÖRNEBO 705.377.57
• Type: Built-in Induction Cooktop
• Number of Zones: 4
• Total Power: Approx. 7.4 kW
• Supply Voltage: 230V ~, 50Hz (Check local requirements)
• Installation Width: 560 mm
• Installation Depth: 490 mm
• Surface Material: Glass-ceramic
• Control Type: Touch sensors
• Safety Features: Child lock, residual heat indicator, auto pan detection, overflow shutdown.

Controls and Settings

Access all functions via the touch control panel located on the front right side.

Basic Controls: On/Off (power symbol), +/- for power level, Timer button, Lock symbol.

Power Levels: Adjustable from 1 (low) to 9 (high) for each zone. Boost Function: Activates maximum power on one zone for a limited time (e.g., 10 minutes). Timer: Set from 1 minute to 99 minutes per zone. Lock: Press for 3 seconds to activate/deactivate child lock. Bridge Function: Select two adjacent zones and press bridge symbol to combine them.

Connecting to Power

Electrical connection must be performed by a licensed professional.

1. Ensure main power switch is OFF.
2. Connect wires according to wiring diagram: Live (L), Neutral (N), Earth (⏚).
3. Use correct cable type and rating as per local regulations (e.g., 3 x 2.5 mm²).
4. Secure connection in terminal block and close cover.
5. Restore power and test operation.

Tip: Keep the electrical connection area dry and free from debris.

Cooking Functions

Designed for use with induction-compatible cookware (magnetic base).

1. Turn on: Press power symbol. All zone displays will light up briefly.
2. Select zone: Touch the zone selector symbol or simply place a pan on the desired zone.
3. Set power: Use +/- buttons to adjust power level (1-9).
4. Use Boost: Press Boost symbol on an active zone for rapid heating.
5. Set Timer: Press Timer, select zone, then use +/- to set minutes.
6. Turn off zone: Press and hold the zone's "-" button until it turns off, or press the power symbol for the whole cooktop.

WARNING! Do not use cookware with damaged bottoms. Do not operate zones without cookware. The surface gets hot from cookware heat transfer.

Safety Features

Child Lock: Locks control panel. Activate/Deactivate by pressing lock symbol for 3 seconds. Residual Heat Indicator: "H" or a dot lights up near a zone that is still hot (>60°C). Automatic Pan Detection: Zone will not activate without suitable cookware. Automatic Shut-off: Turns off a zone after 60 seconds if no pan is detected, or turns off entire cooktop after 10 hours of continuous operation (safety cutoff). Overflow Shutdown: If liquid boils over, the affected zone may shut off automatically.

Care & Cleaning

Allow cooktop to cool completely. Unplug or switch off circuit breaker for thorough cleaning.

1. Wipe with a damp, soft cloth and a mild glass-ceramic cleaner.
2. For stubborn stains, use a dedicated cooktop scraper at a 45-degree angle.
3. Dry with a soft cloth to prevent streaks.
4. Never use abrasive pads, powders, or oven spray cleaners.

CAUTION! Do not use steam cleaners. Do not spill sugar or sugary substances on hot surface as they can cause permanent damage.

Regulatory Information

This appliance complies with EU directives for electromagnetic compatibility and low voltage safety. It is intended for domestic household use only. Disposal: At end of life, disconnect from power and dispose of at a designated electronic waste recycling point in accordance with local regulations. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Reset: Disconnect from power for 2-3 minutes to reset electronic controls.

Service: For repairs, contact IKEA customer service or an authorized service provider. Do not attempt to repair yourself.