IKEA EVEDAL 103.642.26 Lighting instructions manual

The IKEA EVEDAL 103.642.26 is a modern table lamp featuring a glass shade and a metal base, designed for use with LED bulbs (max 7W E14). It includes a built-in dimmer for adjustable light intensity, an on/off switch on the cord, and requires assembly. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Dimmer Function 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Glass shade, Metal base, Built-in dimmer on cord, On/off switch, Cord with plug, Assembly hardware.

Feature	Description
Glass Shade	Provides diffused, ambient lighting
Metal Base	Sturdy foundation for stability
Built-in Dimmer	Adjusts light intensity (low to high)
On/Off Switch	Located on the cord for easy access
Cord with Plug	Standard power connection
Max Bulb Wattage	7W E14 LED bulb (included/not included*)
Assembly Required	Simple tools needed (screwdriver)
Design	Modern, minimalist style
Dimensions	Height: approx. 35 cm, Width: approx. 20 cm
Weight	Approx. 1.5 kg

Assembly Instructions

Unpack and inspect all parts. Ensure you have a clean, flat surface.

Attach the base: Place the metal base on a stable surface. Insert the stem into the base and secure with provided screw.
Install the bulb: Screw the included (or compatible) 7W E14 LED bulb into the socket.
Attach the glass shade: Carefully place the glass shade over the bulb and secure it to the stem by tightening the finial (top nut).
Route the cord: Ensure the cord is neatly arranged and not pinched.

WARNING! Handle glass shade with care to avoid breakage. Do not overtighten screws.

Installation & Setup

Choose a suitable location before plugging in.

Select location: Place on a stable, level surface away from edges and heat sources.
Plug in: Insert the plug into a standard 120V AC wall outlet.
Test operation: Turn on using the cord switch. Adjust dimmer to desired brightness.
Final check: Ensure lamp is stable and cord is not a tripping hazard.

CAUTION! Keep away from water, moisture, and flammable materials. Do not cover the lamp.

Specifications

Model: EVEDAL 103.642.26
Type: Table Lamp
Material: Glass shade, Metal base
Bulb: Max 7W, E14 socket (LED recommended)
Dimmer: Built-in, rotary dial on cord
Switch: On/Off toggle on cord
Cord Length: Approx. 1.8 meters
Voltage: 120V AC, 60Hz
Dimensions (HxW): Approx. 35 cm x 20 cm
Weight: Approx. 1.5 kg

Controls and Operation

Primary controls are located on the power cord.

On/Off Switch: Toggle switch on the cord to turn lamp on or off.

Dimmer Dial: Rotate the dial on the cord to adjust brightness from minimum (dim) to maximum (bright).

Operation: Plug in lamp > Turn on with switch > Adjust brightness with dimmer dial as needed.

Bulb Replacement

Use only recommended bulb type to avoid damage.

Turn off and unplug the lamp. Allow bulb to cool if recently used.
Carefully remove the glass shade by unscrewing the finial.
Unscrew the old bulb from the E14 socket.
Screw in a new 7W E14 LED bulb. Do not exceed wattage.
Reattach the glass shade and secure the finial.
Plug in and test.

Tip: Always use LED bulbs for energy efficiency and lower heat output.

Dimmer Function

The built-in dimmer allows for customizable lighting ambiance.

Ensure lamp is on via the cord switch.
Rotate the dimmer dial clockwise to increase brightness.
Rotate counter-clockwise to decrease brightness.
The dimmer works seamlessly with compatible LED bulbs.

Note: Some non-dimmable LED bulbs may flicker or not function correctly with the dimmer. Use only dimmable LEDs.

Safety Information

Read all instructions before use.

Use only with 120V AC outlet.
Do not use bulbs exceeding 7W (E14).
Keep away from children, water, and heat sources.
Unplug before cleaning or bulb replacement.
Do not operate if cord or plug is damaged.
This lamp is for indoor use only.

WARNING! Risk of electric shock or fire if misused.

Care & Cleaning

Unplug lamp and allow to cool completely before cleaning.

Glass Shade: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners.
Metal Base: Dust with a soft cloth. For marks, use a damp cloth and dry immediately.
Cord: Wipe with a dry cloth. Ensure it is not knotted or damaged.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA terms and conditions.

For product support, assembly help, or warranty claims:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for warranty details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / faulty bulb / switch off	Check outlet; replace bulb; ensure switch is ON.
Light flickers	Loose bulb / incompatible bulb	Tighten bulb; use only recommended dimmable LED.
Dimmer not working	Non-dimmable bulb / faulty dimmer	Replace with dimmable LED bulb.
Lamp is unstable	Base not properly assembled / uneven surface	Re-tighten base screw; place on level surface.
Overheating	Bulb wattage too high / covered vent	Use only 7W max bulb; ensure lamp is not covered.

Disposal: Dispose of according to local electronic waste regulations. Recycle where possible.

Support: www.ikea.com