IKEA ENHET 594.409.26 Base Frame instructions manual

The IKEA ENHET 594.409.26 is a modular base frame designed for kitchen and bathroom storage, part of the ENHET series. It provides a sturdy foundation for wall cabinets, featuring adjustable feet for leveling on uneven floors, pre-drilled holes for easy assembly and mounting, compatibility with various ENHET doors and fronts, and a clean, minimalist design. Constructed from powder-coated steel for durability and moisture resistance. Below are key sections for safety, features, parts list, assembly, installation, adjustment, and care.

1. Features at a Glance 2. Parts & Hardware Included 3. Safety Instructions 4. Assembly Instructions 5. Installation & Leveling 6. Attaching Doors & Fronts 7. Weight Capacity & Specifications 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Powder-coated steel frame, Adjustable plastic feet, Mounting brackets, Pre-drilled holes for wall mounting and cabinet attachment.

Feature	Description
Adjustable feet	Four screw-in feet for leveling on uneven floors (up to 20mm adjustment)
Pre-drilled holes	For easy wall mounting and attachment of ENHET cabinet boxes
Modular design	Compatible with ENHET doors, drawers, and shelves
Powder-coated steel	Durable, rust-resistant finish suitable for humid environments
Cleanable surface	Easy to wipe clean with a damp cloth
Minimalist profile	Low height design maximizes storage space
Wall mounting brackets	Included for secure attachment to wall studs
Cable management	Open design allows for routing of cables/pipes

Parts & Hardware Included

Unpack and verify all parts before starting assembly.

Base Frame (1): Main powder-coated steel frame.
Adjustable Feet (4): Black plastic feet with threaded inserts.
Wall Mounting Brackets (2): L-shaped steel brackets with pre-drilled holes.
Screws for Wall Mounting (8): Suitable for wood studs or concrete walls (anchors not included).
Assembly Instructions (1): This manual.

WARNING! Check package for damage. Do not use if any part is bent or missing.

Safety Instructions

Always follow safety guidelines to prevent injury or damage.

Use at least two people for assembly and installation.
Ensure the frame is securely mounted to wall studs or appropriate anchors.
Do not exceed maximum weight capacity (see Specifications).
Keep away from open flames or extreme heat sources.
Use only IKEA-approved components for attachments.

CAUTION! Always mount to solid walls. Test stability before loading.

Assembly Instructions

Assemble the base frame before wall mounting.

Place the frame upside down on a soft, protected surface.
Screw the four adjustable feet into the threaded inserts at each corner.
Hand-tighten initially; final adjustment will be done after installation.
Attach wall mounting brackets to the back of the frame using provided screws (if not pre-attached).
Ensure all connections are tight and brackets are aligned.

Tip: Do not overtighten feet; they may need adjustment during leveling.

Installation & Leveling

Mount the frame securely to the wall and level it.

Locate and mark wall studs using a stud finder.
Hold frame against wall at desired height (typically 5-10cm from floor).
Mark drilling points through bracket holes.
Drill pilot holes into wall studs (or use appropriate wall anchors for concrete).
Secure frame to wall with provided screws, ensuring it is level side-to-side.
Adjust feet up or down to level front-to-back and eliminate rocking.
Use a spirit level to check both directions.
Tighten all feet securely once level.

WARNING! Always mount into wall studs or use suitable anchors for solid walls.

Attaching Doors & Fronts

The base frame is designed for ENHET cabinet boxes, doors, and fronts.

Place ENHET cabinet box onto the leveled base frame.
Secure cabinet to frame using appropriate screws (may come with cabinet).
Attach hinges to door according to ENHET door instructions.
Mount door to cabinet using hinge mounting plates.
Adjust door alignment using hinge screws (up/down, left/right, in/out).
Attach handles or knobs as desired.

Note: Ensure doors open freely without hitting adjacent units or walls.

Weight Capacity & Specifications

Model: ENHET 594.409.26
Material: Powder-coated steel
Color: White
Dimensions (WxDxH): 60cm x 40cm x 8cm (approximate)
Max Load Capacity: 25kg (evenly distributed)
Adjustable Feet Range: 0-20mm
Compatible With: ENHET cabinet boxes, doors, shelves, drawers
Warranty: 10-year limited warranty (see warranty card)

Care & Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals, steel wool, or abrasive pads. Dry thoroughly after cleaning.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Frame not level	Uneven floor or incorrect foot adjustment	Re-adjust feet individually; use spirit level.
Frame wobbles	Loose wall mounting or feet	Tighten all screws and foot adjustments; ensure wall mounting is secure.
Doors misaligned	Hinge adjustment needed	Adjust hinge screws (up/down, left/right, in/out).
Difficulty attaching cabinet	Misaligned pre-drilled holes	Check cabinet model compatibility; align carefully before screwing.
Rust spots	Finish damaged or prolonged moisture	Clean, dry, and touch up with matching paint; keep dry.

Replacement Parts: Contact IKEA customer service for missing or damaged parts.

Warranty & Support

IKEA 10-year limited warranty applies under normal household use. Proof of purchase required. For assembly assistance, missing parts, or product support, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com. Retain this manual for future reference.