The IKEA ENHET 394.802.49 is a high shelf unit designed for versatile storage solutions in kitchens, bathrooms, or other rooms. It features a clean, modern design, is made from durable materials, and is part of the modular ENHET series. This manual provides essential information for safety, assembly, installation, use, and care of your high shelf unit.
Read all instructions before assembly and use. Failure to follow warnings can result in injury or damage.
| Warning | Description |
|---|---|
| Weight Limit | Do not exceed the maximum load capacity of 55 lbs (25 kg) per shelf. |
| Wall Mounting | Must be securely attached to a solid wall (studs or masonry). Do not mount to hollow walls without proper anchors. |
| Child Safety | Do not allow children to climb on the unit. Heavy items should be stored on lower shelves. |
| Tool Safety | Use appropriate tools. Keep assembly area clear of children and pets. |
| Surface Stability | Ensure the unit is level and all fasteners are tight before use. |
Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.
Note: You may need a drill, level, pencil, and screwdriver (not included).
Follow steps in order. Assemble on a soft surface to avoid scratches.
Tip: Do not fully tighten cam locks until all parts are aligned.
Mounting to the wall is required for stability.
WARNING! If you are unsure about wall type or mounting, consult a professional.
Clean with a damp cloth wrung in a mild soap solution. Wipe dry immediately.
DO NOT: Use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive moisture.
Check wall fasteners and shelf stability periodically (every 6 months).
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit is wobbly | Cam locks not tight; wall mounting loose | Tighten all cam locks with Allen key. Check and tighten wall screws. |
| Shelf sags | Weight limit exceeded | Remove excess weight. Distribute weight evenly. |
| Difficult assembly | Parts misaligned | Disassemble step and re-check diagram. Ensure dowels are fully inserted. |
| Cannot mount to wall | Wrong wall type; no studs | Use appropriate heavy-duty wall anchors for your wall material. Locate studs with a stud finder. |
| Scratches on surface | Assembled on hard floor | Use the cardboard packaging as a soft surface during assembly. |
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.
For spare parts, assembly help, or more information:
Note: Always keep your receipt as proof of purchase.