IKEA ENHET 094.409.00 High Shelves instructions manual

The IKEA ENHET 094.409.00 High Shelves are part of the ENHET modular kitchen and storage system, designed for wall mounting to maximize vertical space. They feature a sturdy metal frame, adjustable shelf heights, and a clean, powder-coated finish. Suitable for storing lightweight to medium-weight items in kitchens, bathrooms, or utility rooms. Below are key sections for safety, parts list, assembly, installation, use, care, and warranty.

Parts & Tools Checklist

Before starting, verify all parts are present. Key components: Shelf frames, shelves, wall brackets, screws, wall plugs, assembly tools.

Tools Needed: Phillips screwdriver, drill, level, pencil, measuring tape.

Safety Information

Read all instructions before assembly and installation.

1. Wall Strength: Must be mounted to solid wall (stud, concrete, brick). Do not mount to drywall alone.
2. Weight Limit: Max 15 kg (33 lbs) per shelf. Do not exceed total weight limit.
3. Child Safety: Do not allow children to climb on shelves. Secure heavy items at bottom.
4. Tool Safety: Use appropriate safety gear when drilling.

WARNING! Improper installation can cause shelves to fall, resulting in injury or damage. Ensure wall can support load.

Assembly Instructions

Assemble frames before wall mounting.

1. Lay frames on soft surface to avoid scratches.
2. Insert shelves into frame slots at desired height (adjust later if needed).
3. Secure shelves using provided screws and Allen key.
4. Attach wall brackets to back of frames as indicated in diagram.
5. Ensure all connections are tight and frames are square.

Tip: Assemble with a partner for easier handling.

Wall Installation

Mounting to solid wall is critical.

1. Locate wall studs using stud finder. Mark positions for brackets.
2. Hold assembled unit against wall. Use level to ensure it is horizontal.
3. Mark drill holes through bracket holes.
4. Drill pilot holes at marks (size as per wall plug instructions).
5. Insert wall plugs (if not into stud).
6. Align brackets with holes, insert screws, and tighten securely.
7. Double-check stability by gently pulling on shelves.

CAUTION! If drilling into tile, use appropriate drill bit to prevent cracking.

Adjusting Shelf Height

Shelves can be repositioned after installation.

1. Remove items from shelf.
2. Loosen screws on both sides of shelf using Allen key.
3. Lift or lower shelf to desired height (notches indicate positions).
4. Ensure shelf is level, then retighten screws firmly.
5. Repeat for other shelf if adjusting.

Note: Do not adjust while shelves are loaded.

Weight Limits & Use

• Max Load per Shelf: 15 kg (33 lbs).
• Total Max Load: 30 kg (66 lbs) for both shelves.
• Recommended Items: Dishes, cookbooks, small appliances, decorative items.
• Avoid: Heavy pots, large liquid containers, or unstable stacks.
• Distribution: Distribute weight evenly across shelf surface.

WARNING! Overloading can cause brackets to pull out of wall or shelves to bend.

Care & Maintenance

Clean regularly to maintain appearance.

1. Metal Frame: Wipe with damp cloth and mild detergent. Dry immediately.
2. Shelves: Use soft cloth; avoid abrasive cleaners.
3. Check Tightness: Periodically inspect screws and brackets for looseness.
4. Avoid Moisture: Do not use in constantly wet areas without ventilation.

CAUTION! Do not use harsh chemicals, steel wool, or scouring pads.

Troubleshooting

Warranty & Support

IKEA Limited Warranty: 10 years for ENHET system. Covers manufacturing defects under normal use. Proof of purchase required.

Support: For missing parts, assembly help, or warranty claims:

• Visit: www.ikea.com
• Contact: IKEA Customer Support at 1-888-888-4532
• In-Store: Bring product and receipt to IKEA returns desk.

Recycling: Dispose of packaging responsibly. Metal parts recyclable.