IKEA ELLOVEN 704.747.69 Notice Board instructions manual

The IKEA ELLOVEN 704.747.69 is a versatile cork notice board designed for organizing notes, photos, and reminders. It features a natural cork surface, a lightweight aluminum frame, and includes mounting hardware for easy wall installation. Below are key sections for safety, features, assembly, installation, usage, care, and warranty information.

Features at a Glance

Key components: Natural cork surface, Aluminum frame, Mounting hardware included, Pre-drilled holes for hanging.

Package Contents

Unpack and verify all parts are included before assembly.

1. Notice board with cork surface and aluminum frame (1 piece)
2. Wall mounting screws (2 pieces)
3. Wall plugs (2 pieces)
4. Instruction manual (this document)

IMPORTANT! Check for any damage during shipping. Contact IKEA customer service if any parts are missing or damaged.

Tools Required

You will need the following tools for assembly and installation:

1. Phillips screwdriver (medium size)
2. Pencil for marking wall
3. Level (recommended for straight hanging)
4. Measuring tape
5. Hammer (for inserting wall plugs if needed)
6. Drill with appropriate drill bit (for hard walls)

CAUTION! Use appropriate safety equipment when drilling. Ensure you have proper tools before starting.

Assembly Instructions

The notice board comes pre-assembled. No assembly of the board itself is required.

1. Remove all packaging materials from the notice board.
2. Inspect the cork surface and frame for any visible damage.
3. Clean the cork surface with a dry cloth if needed.
4. Attach mounting hardware to the board (if not pre-attached).

NOTE: The notice board is delivered fully assembled. Only wall mounting requires additional steps.

Wall Mounting

• Wall Type: Suitable for drywall, plaster, or wood stud walls.
• Mounting Height: Recommended eye level (approximately 150-160 cm from floor).
• Weight Capacity: Designed for light to medium items using standard pins.
• Hardware Included: Screws and wall plugs for standard walls.
• Alternative Mounting: For concrete or brick walls, use appropriate wall anchors.

Controls and Settings

Step-by-step wall mounting instructions:

1. Choose location: Select a wall area free from moisture and direct sunlight.
2. Mark holes: Hold board against wall, use pencil to mark through mounting holes.
3. Check level: Use level to ensure marks are horizontal.
4. Drill holes: Drill holes at marked spots (size appropriate for wall plugs).
5. Insert wall plugs: Tap wall plugs into drilled holes until flush with wall.
6. Mount board: Align board holes with wall plugs, insert and tighten screws.
7. Final check: Gently pull board to ensure secure mounting.

WARNING! Ensure wall can support weight. Use appropriate anchors for heavy walls. Mount securely to prevent falling.

Usage Guidelines

Using standard push pins or thumb tacks (not included):

1. Insert pins at slight angle for better grip.
2. Distribute weight evenly across board surface.
3. Avoid overloading one area with heavy items.
4. Use appropriate pins for different materials (paper, photos, light objects).
5. Rotate displayed items regularly to prevent permanent marks on cork.

Tip: Use colored pins or decorative tacks for better organization and visual appeal.

Care & Maintenance

Supports various organizational uses:

1. Home organization: Shopping lists, calendars, reminders.
2. Office use: Project timelines, important notices, business cards.
3. Classroom: Student work display, announcements, schedules.
4. Creative space: Inspiration boards, photo displays, art arrangements.
5. Kitchen: Recipes, meal plans, grocery lists.

WARNING! Do not use adhesive tapes or glue directly on cork surface as they may damage it. Use only pins designed for cork boards.

Accessibility Features

Cleaning instructions for cork surface and aluminum frame:

1. Unplug or remove any electrical items nearby before cleaning.
2. Use soft, dry cloth to wipe cork surface.
3. For stubborn stains, slightly dampen cloth with water only.
4. Clean aluminum frame with mild soap solution if needed, then dry immediately.
5. Avoid using chemical cleaners, abrasives, or excessive moisture.

CAUTION! Do not soak cork surface. Never use harsh chemicals or abrasive cleaners.

Regulatory Information

Important safety precautions:

1. Mount securely to prevent falling, especially in households with children.
2. Keep away from heat sources and direct sunlight to prevent cork drying.
3. Do not place heavy objects that exceed board's capacity.
4. Ensure pins are properly inserted to prevent injury.
5. Check mounting regularly for stability.

WARNING! Not suitable for outdoor use. Keep away from moisture to prevent mold growth.

Troubleshooting

Warranty: IKEA limited warranty applies. Contact IKEA customer service for warranty claims.

Support: Visit www.ikea.com or contact your local IKEA store for assistance.