IKEA EKET 494.907.52 with 4 Compartment Cabinet instructions manual

The IKEA EKET 494.907.52 is a versatile 4-compartment wall-mounted cabinet system designed for storage and display. Made from particleboard with foil finish, it features a clean, modern design, adjustable shelves, concealed mounting hardware, and can be combined with other EKET units. Below are key sections for safety, parts list, assembly, mounting, use, care, and troubleshooting.

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet frames, shelves, back panels, mounting rails, screws, wall anchors, cam locks, dowels.

Tools Required

Tools not included; prepare before starting.

• Phillips screwdriver
• Hammer (for wall anchors if needed)
• Drill (optional, for pilot holes)
• Level
• Pencil
• Tape measure

NOTE: Using correct tools ensures proper assembly and safety.

Safety Instructions

Read all instructions before assembly. Use caution.

1. Weight Limit: Do not exceed 22 lbs (10 kg) per shelf. Total cabinet load not to exceed 88 lbs (40 kg).
2. Wall Mounting: Must be mounted to wall studs or solid masonry using provided hardware. Do not mount to drywall alone.
3. Child Safety: Secure to wall to prevent tipping. Keep small hardware away from children.
4. Lifting: Cabinet is heavy; use two people for handling.
5. Surface Protection: Assemble on soft surface to avoid scratches.

WARNING! Failure to secure to wall can result in serious injury or death from tipping.

Assembly Steps

Follow steps in order. Allow 60-90 minutes for assembly.

1. Prepare Parts: Lay out all parts on clean, flat surface. Identify pieces using included diagram.
2. Join Frames: Insert wood dowels (F) into side panels. Connect frames using cam locks (E). Tighten with screwdriver until flush.
3. Attach Back Panel: Place back panel (C) into groove on assembled frame. Secure with small nails/screws if provided.
4. Install Shelves: Insert shelf (B) into cabinet. Adjust height by placing shelf pins in desired holes.
5. Attach Cover Caps: Press cover caps (I) over visible cam locks for finished look.
6. Repeat: Assemble all 4 compartments identically.

Tip: Do not overtighten cam locks; hand-tighten only.

Wall Mounting

Critical step: Must be mounted securely to wall.

1. Locate Studs: Use stud finder to locate wall studs. Mark positions with pencil.
2. Attach Mounting Rails: Align rails (D) with stud marks. Level rails. Screw (H) rails into studs using provided screws.
3. Hang Cabinets: With help, lift assembled cabinet unit onto mounted rails. Ensure locking mechanism engages.
4. Secure Cabinets: Use additional screws through back panel into wall studs for extra stability.
5. Final Check: Gently pull on cabinet to ensure it is firmly attached.

CAUTION! If no studs available, use appropriate wall anchors for your wall type (not included).

Adjusting Shelves

Shelves are adjustable for custom storage.

1. Remove shelf by lifting up and pulling forward.
2. Reposition shelf pins in desired hole pattern (4 options per compartment).
3. Place shelf back on pins, ensuring it sits level and secure.
4. Distribute weight evenly across shelf.

Note: For glass items, ensure shelf is level and not overloaded.

Care & Maintenance

Clean regularly to maintain appearance.

• Cleaning: Wipe with damp cloth and mild detergent. Dry immediately. Do not use abrasive cleaners.
• Avoid: Direct sunlight, heat sources, and excessive moisture to prevent warping/fading.
• Inspection: Periodically check mounting hardware and tighten if loose.

CAUTION! Do not use harsh chemicals; they may damage finish.

Specifications

• Product Name: EKET Cabinet with 4 compartments
• Article Number: 494.907.52
• Color: White
• Material: Particleboard, Foil, Plastic edging
• Dimensions (W x H x D): 35 3/8" x 14 1/8" x 15 3/4" (90 x 36 x 40 cm)
• Compartment Interior Dimensions: Approx. 8" x 12" x 14" each
• Weight Capacity: 22 lbs (10 kg) per shelf, 88 lbs (40 kg) total
• Mounting: Wall-mounted only

Warranty Information

IKEA limited warranty applies. See IKEA warranty card for details.

• Warranty Period: Varies by region; typically 10 years for structural integrity.
• Coverage: Manufacturing defects in materials/workmanship.
• Not Covered: Damage from improper assembly, mounting, misuse, or normal wear.
• Claim: Keep receipt. Contact IKEA customer service with article number.

For more: www.ikea.com or call IKEA customer support.

Troubleshooting

Need Help? Visit IKEA assembly support online or contact IKEA customer service.