IKEA EKET 193.861.01 Leg instructions manual

The IKEA EKET 193.861.01 Leg is a set of adjustable furniture legs designed for use with EKET cabinets and storage units. These legs provide elevation and stability, allowing for customization of height and style. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable legs, mounting plates, screws, and assembly tools.

Feature	Description
Adjustable height	Allows customization of furniture height
Sturdy construction	Made from durable materials for stability
Easy installation	Includes all necessary hardware and tools
Compatibility	Designed for EKET cabinets and storage units
Modern design	Sleek appearance to complement furniture
Non-slip feet	Provides stability on various surfaces
Weight capacity	Supports standard EKET unit weight
Finish options	Available in multiple colors to match decor
Tool-free adjustment	Height can be adjusted without additional tools
Package contents	4 legs, mounting hardware, instruction manual

Installation

Unpack and inspect contents. Ensure all parts are present before beginning.

Prepare the EKET unit: Place the cabinet upside down on a soft surface to prevent scratches.
Attach mounting plates: Align plates with pre-drilled holes on the bottom of the cabinet.
Secure legs: Screw legs into mounting plates until hand-tight, then use included tool to secure.
Adjust height: Turn legs to desired height, ensuring all four legs are level.
Flip unit upright: Carefully turn the cabinet right-side up.

WARNING! Ensure the unit is stable before placing items on it. Use two people for handling heavy cabinets.

First-Time Setup

After installation, follow these steps for optimal use.

Check stability: Gently rock the cabinet to ensure all legs are securely attached.
Level adjustment: Use a level to check if the cabinet is even; adjust legs as needed.
Weight distribution: Place heavier items at the bottom of the cabinet for better stability.
Final inspection: Ensure all screws are tight and legs are properly adjusted.

CAUTION! Do not exceed the recommended weight capacity. Keep legs clean and free from debris.

Specifications

Product Name: EKET Leg 193.861.01.
Height Range: Adjustable from 4 to 6 inches.
Material: Steel with powder-coated finish.
Weight Capacity: Up to 50 lbs per leg.
Compatibility: Designed for EKET cabinets and storage units.
Package Contents: 4 legs, 16 screws, 4 mounting plates, Allen key.
Color Options: White, black, stainless steel.
Warranty: Limited 1-year warranty from date of purchase.

Controls and Settings

Adjust height by turning legs clockwise to raise and counterclockwise to lower.

Tools Required: Included Allen key for initial installation; no tools needed for height adjustment.

Stability: Ensure all legs are adjusted to the same height for even support. Leveling: Use a bubble level to check balance. Maintenance: Periodically check screw tightness and leg stability.

Connecting Devices

Not applicable for furniture legs. This section is reserved for electronic device connections in other manuals.

Tip: For furniture assembly, refer to the installation section above.

Playing DVD Media

Not applicable for furniture legs. This section is reserved for media playback in other manuals.

WARNING! This product does not play media. Refer to the correct manual for electronic devices.

Accessibility Features

Adjustable height allows for customization to suit user needs, including accessibility requirements.

Care & Cleaning

Use a damp cloth to wipe legs clean. Avoid abrasive cleaners or harsh chemicals.

CAUTION! Do not use excessive water; dry thoroughly to prevent rust or damage.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Leg wobbles	Loose screws or uneven adjustment	Tighten screws with Allen key; adjust legs to same height.
Cabinet not level	Legs adjusted unevenly	Use a level to adjust each leg until cabinet is even.
Difficulty adjusting height	Debris in threads or overtightened	Clean threads; loosen slightly before adjusting.
Scratches on floor	Non-slip feet missing or damaged	Check feet for wear; replace if necessary.
Legs not attaching securely	Incorrect screw size or stripped threads	Use provided screws; ensure threads are not damaged.

Reset: Remove legs and reinstall following installation steps.

Service: Contact IKEA customer service for replacement parts or assistance.