IKEA EKET 093.293.90 Cabinet instructions manual

The IKEA EKET 093.293.90 is a versatile wall-mounted cabinet system designed for storage and display. It features a modular design, particleboard construction with foil finish, concealed mounting hardware, adjustable shelves, and a clean Scandinavian aesthetic. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

Parts & Hardware Included

Verify all parts are present before starting assembly.

Tools Required

Tools not included. You will need:

• Phillips screwdriver (#2)
• Hammer (for wall anchors)
• Pencil
• Level
• Measuring tape
• Electric drill (optional, for easier screw driving)
• Stud finder (recommended for secure mounting)

Safety Instructions

WARNING! Serious or fatal crushing injuries can occur from furniture tipping over. This cabinet must be securely anchored to the wall.

1. Use correct wall fasteners: Mount only into wall studs or use provided anchors for solid drywall. Verify wall type.
2. Two-person assembly: Some steps are easier and safer with two people.
3. Check stability: Do not place heavy items on top. Distribute weight evenly on shelves.
4. Keep away from children: Do not let children climb on or hang from the cabinet.
5. Inspect parts: Do not assemble if any part is damaged, warped, or missing.

Assembly Steps

Assemble on a soft, clean surface to avoid scratches.

1. Attach back panel: Place frame face down. Align back panel (B) and secure with provided screws.
2. Insert cam lock dowels: Press dowels (E) into pre-drilled holes on side panels as shown in diagram.
3. Connect side to top/bottom: Align dowels with holes in top and bottom panels. Tighten cam locks (H) with a screwdriver (turn clockwise until tight).
4. Attach front frame: Slide front frame (D) onto the front of the cabinet box. Secure from the inside with screws.
5. Install shelves: Insert adjustable shelves (C) onto shelf pins. Ensure they are level and secure.
6. Attach cover caps: Press plastic caps (I) over visible cam locks for a finished look.

Tip: Do not overtighten cam locks; hand-tight plus a quarter turn is sufficient.

Wall Mounting Installation

This is the most critical step for safety.

1. Locate studs: Use a stud finder to locate solid wood studs in your wall. Mark their center with a pencil.
2. Position cabinet: Hold the assembled cabinet against the wall in the desired location. Use a level to ensure it is perfectly horizontal. Mark the top screw holes on the wall through the keyhole slots on the back of the cabinet.
3. Drill pilot holes: If mounting into studs, drill pilot holes at your marks slightly smaller than the screw diameter. If using drywall anchors, drill holes to the size specified on the anchor package.
4. Install anchors/screws: Insert wall anchors (G) if not using studs. Partially screw the mounting screws (F) into the studs or anchors, leaving the head protruding about 5mm.
5. Hang cabinet: Lift the cabinet and hook the keyhole slots onto the screw heads. Gently lower the cabinet to lock it in place.
6. Secure bottom: Install the remaining screws through the bottom mounting holes into the wall to prevent tilting.
7. Final check: Firmly pull on the cabinet to ensure it does not move. Re-tighten screws if necessary.

Adjusting Shelves

Shelves are adjustable for flexible storage.

1. Empty the shelf you wish to move.
2. Lift the front of the shelf slightly and pull it forward to disengage the rear pins.
3. Lift the shelf out completely.
4. Reposition the metal shelf pins into the desired set of holes on the side panels.
5. Insert the shelf by placing the rear pins first, then lowering the front until it clicks into place.
6. Ensure the shelf is level and stable before placing items on it.

Weight Limits & Use

• Max load per shelf: 7 kg (15 lbs).
• Total cabinet capacity: 20 kg (44 lbs), distributed evenly.
• Recommended items: Books, decorative objects, small electronics, photo frames.
• Not recommended: Heavy appliances, large amounts of liquid, excessive weight in one spot.
• Environment: For indoor use only. Avoid high humidity (e.g., bathrooms) and direct sunlight to prevent warping.

Care & Cleaning

Unload cabinet before cleaning.

1. Surface: Wipe with a soft, damp cloth. Wipe dry immediately.
2. Stubborn stains: Use a mild soap solution. Never use abrasive cleaners, scouring pads, or solvents.
3. Interior: Vacuum dust from shelves and corners periodically.

CAUTION! Do not use wax, polish, or furniture spray, as they can damage the foil finish.

Disassembly & Moving

To move or disassemble:

1. Remove all items and shelves.
2. Unscrew the cabinet from the wall.
3. Remove the cover caps (I) and loosen the cam locks (H) with a screwdriver (turn counter-clockwise).
4. Gently separate the panels. Keep all hardware organized for reassembly.
5. Store and transport panels flat to avoid damage.

Warranty Information

IKEA Limited Warranty applies. This product is warranted against manufacturing defects in materials and workmanship for the period specified by IKEA in your country. Warranty does not cover damage from improper assembly, installation, misuse, accidents, or normal wear and tear. Proof of purchase (receipt) is required for warranty service. For details, visit www.IKEA.com or contact your local IKEA store.

Troubleshooting

Missing Parts? Contact IKEA customer service with your product number (093.293.90) for replacement parts.

Support: Visit www.IKEA.com or your local IKEA store.