IKEA EKET 092.846.50 with Door Cabinet instructions manual

The IKEA EKET 092.846.50 is a versatile wall-mounted or freestanding cabinet with a door, part of the EKET modular storage system. It features a clean, modern design, adjustable shelves, concealed hinges, and a soft-closing door. Constructed from particleboard with foil finish. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Product Overview & Features 2. Included Parts & Tools 3. Safety Instructions 4. Assembly Instructions 5. Wall Mounting Guide 6. Adjusting & Use 7. Care & Maintenance 8. Technical Specifications 9. Warranty & Support 10. Troubleshooting

Product Overview & Features

Key components: Cabinet frame, Door, Adjustable shelf, Concealed hinges, Mounting hardware, Soft-closing mechanism.

Feature	Description
Modular Design	Part of the EKET system; can be combined with other units
Door with Soft-Close	Prevents slamming; ensures quiet operation
Adjustable Shelf	Can be positioned at different heights inside the cabinet
Concealed Hinges	Provides a clean, streamlined look
Mounting Options	Can be wall-mounted or used freestanding
Finish	White foil finish; easy to clean
Dimensions (HxWxD)	14 1/8" x 14 1/8" x 14 1/8" (36x36x36 cm)
Weight Capacity	Max. load per shelf: 11 lbs (5 kg)
Material	Particleboard, ABS plastic, Steel

Included Parts & Tools

Unpack and verify all parts are present before starting assembly.

Main Parts: Cabinet frame (1), Door (1), Shelf (1).
Hardware: Concealed hinges (2), Screws for hinges, Wall mounting screws and plugs, Shelf supports (4), Cam locks and dowels.
Tools Needed (not included): Phillips screwdriver, Hammer, Level, Pencil, Drill (for wall mounting).

WARNING! Check package for damage. Do not use damaged parts.

Safety Instructions

Follow these instructions to ensure safe assembly and use.

Assembly Surface: Use a soft, clean surface to avoid scratching parts.
Wall Mounting is Critical: If wall-mounted, ensure it is securely attached to wall studs or solid masonry using provided hardware. The cabinet must not be attached only to plasterboard.
Weight Limit: Do not exceed the maximum load per shelf (11 lbs / 5 kg).
Child Safety: Do not let children climb or hang on the cabinet. Secure heavy items to prevent tipping.

CAUTION! Always use two people for assembly and mounting. The unit is heavy when assembled.

Assembly Instructions

Assemble the cabinet frame before attaching the door or mounting to the wall.

Step 1 - Connect Panels: Insert dowels into side panels. Attach back panel using cam locks. Tighten with a screwdriver.
Step 2 - Install Shelf Supports: Insert the four metal shelf supports into the pre-drilled holes on the inner sides at your desired height.
Step 3 - Place Shelf: Rest the shelf on the installed supports.
Step 4 - Attach Door Hinges: Screw the two concealed hinges to the inside top and bottom of the door using provided screws.
Step 5 - Mount Door: Hook the hinges onto the mounting plates on the cabinet frame. Close the door to check alignment.
Step 6 - Adjust Door: Use a screwdriver to adjust the hinges for perfect alignment and closing tension.

Tip: Do not fully tighten all screws until the unit is fully assembled and aligned.

Wall Mounting Guide

For secure wall mounting, follow these steps carefully.

Locate Studs: Use a stud finder to locate solid wood studs or masonry in your wall. Mark their positions.
Position Cabinet: Hold the assembled cabinet against the wall at the desired height. Use a level to ensure it is straight. Mark the screw hole positions on the wall through the mounting holes on the back of the cabinet.
Drill Pilot Holes: At the marked positions, drill pilot holes into the wall studs. Use a drill bit slightly smaller than the wall plugs.
Insert Wall Plugs: Tap the provided wall plugs into the pilot holes.
Secure Cabinet: Lift the cabinet into position. Insert and tighten the mounting screws through the cabinet back and into the wall plugs. Ensure the cabinet is firmly attached and does not wobble.

WARNING! If you cannot mount into studs, you must use appropriate heavy-duty wall anchors suitable for the wall type and the cabinet's weight. Test stability before use.

Adjusting & Use

Adjusting Shelf Height: Remove shelf. Pull out the metal shelf supports and re-insert them into another set of pre-drilled holes. Replace shelf.

Door Adjustment: The concealed hinges allow 3-way adjustment:

Height: Loosen the hinge screw to move door up/down.
Depth: Adjust the screw at the back of the hinge to move door closer to or further from the frame.
Sideways: Adjust the screw on the side of the hinge to align the door left/right.

Soft-Close Feature: The hinge has an integrated soft-close mechanism. No adjustment is needed.

Care & Maintenance

Clean with a damp cloth wrung out in a mild soap solution. Wipe dry immediately.

DO NOT: Use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive water.

Periodically check that all screws and wall mounts are tight.

Technical Specifications

Article Number: 092.846.50
Product Name: EKET Cabinet with door
Dimensions (HxWxD): 14 1/8" x 14 1/8" x 14 1/8" (36x36x36 cm)
Max. Load/Shelf: 11 lbs (5 kg)
Package Weight: Approx. 15.4 lbs (7 kg)
Material:
- Frame/Shell: Particleboard, Foil
- Door: Particleboard, Foil
- Hinge: Steel
- Shelf: Particleboard, Foil
Color: White

Warranty & Support

IKEA limited warranty applies. See IKEA warranty terms for details. For spare parts, assembly help, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your IKEA receipt for warranty details.

This product is designed for indoor residential use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Cabinet wobbles	Uneven floor; loose screws; insecure wall mount	Check level; tighten all frame and mounting screws; ensure wall mount is in studs.
Door does not close properly	Hinges misaligned; obstruction	Adjust hinges using 3-way adjustment screws. Check for items blocking the door.
Door slams shut	Soft-close mechanism faulty	Ensure hinge is correctly installed. Contact IKEA for a hinge replacement if defective.
Shelf sags or is unstable	Overloaded; supports not fully inserted	Do not exceed weight limit. Ensure all four supports are fully clicked into the holes.
Difficulty assembling parts	Parts forced incorrectly; cam locks not turned fully	Disassemble and follow steps precisely. Ensure all cam locks are turned fully to the locked position (usually a "click").

Important: Do not modify the product. Use only IKEA spare parts.

Support: www.ikea.com or your local IKEA store.