IKEA EKET 092.846.50 Cabinet instructions manual

The IKEA EKET 092.846.50 is a versatile cabinet unit designed for wall mounting or floor placement, featuring a clean, modern design with adjustable shelves. It is part of the EKET series, allowing for combination with other units to create customized storage solutions. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

Package Contents & Tools Needed

Before assembly, verify all parts are included and undamaged.

Tools you need: Phillips screwdriver, hammer, level, measuring tape, pencil.

Safety Instructions

Read all instructions before assembly and installation.

1. Lifting: Cabinet is heavy; use two people to lift and position.
2. Wall Mounting: MUST be securely attached to wall studs using provided brackets to prevent tipping. Use a stud finder.
3. Children: Do not allow children to climb on or play with the cabinet.
4. Surface: Place on a stable, level floor if not wall-mounted.
5. Tools: Use tools carefully to avoid injury.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided anti-tip device.

Assembly Steps

Follow steps in order. Do not fully tighten screws until assembly is complete.

1. Unpack: Lay all parts on a soft, clean surface to avoid scratches.
2. Frame: Connect side panels to top and bottom panels using dowels and cam locks. Tighten cam locks clockwise with a screwdriver.
3. Back Panel: Insert back panel into grooves on rear of frame. Secure with provided nails or screws.
4. Shelves: Insert shelf pins at desired heights. Gently place shelves on pins.
5. Doors/Handles (if applicable): Attach hinges to door, then mount door to frame. Attach handle.

TIP: Ensure all cam locks are fully tightened and flush for a sturdy frame.

Wall Mounting Instructions

CRITICAL: This step is mandatory for safety.

1. Locate wall studs using a stud finder. Mark positions with a pencil.
2. Hold mounting bracket against wall, aligned with stud marks. Use a level to ensure it is straight.
3. Pre-drill holes at marks, insert wall plugs (for drywall if not hitting stud).
4. Screw bracket securely into wall studs using provided screws.
5. Lift cabinet and hook onto mounted brackets. Ensure it is securely engaged.
6. Check stability. The cabinet should not wobble or pull away from the wall.

CAUTION! If you cannot mount into studs, you must use appropriate hollow-wall anchors rated for the cabinet's weight. Consult a professional if unsure.

Specifications

• Product Name: EKET Cabinet
• Article Number: 092.846.50
• Color/Finish: White
• Dimensions (HxWxD): 70cm x 35cm x 35cm (approx. 27 1/2" x 13 3/4" x 13 3/4")
• Weight: 15 kg (approx. 33 lbs)
• Material: Particleboard, Fiberboard, Plastic, Steel
• Max Load per Shelf: 7 kg (approx. 15 lbs)
• Recommended Use: Indoor use only. For living room, bedroom, or hallway storage.

Adjusting Shelves

Shelves are adjustable to customize storage space.

1. Empty the shelf you wish to adjust.
2. Lift shelf slightly up and pull forward to remove from pins.
3. Reposition metal shelf pins into different pre-drilled holes on the inner side panels.
4. Ensure pins on both sides are at the same height.
5. Place shelf back onto the new set of pins and press down gently until secure.

Note: Do not exceed the maximum load per shelf. Distribute weight evenly.

Combining with Other EKET Units

The EKET system is designed for modular combination.

• Units can be placed side-by-side or stacked vertically.
• Use connecting devices (sold separately) to secure multiple units together for stability.
• When stacking, always place heavier units at the bottom. All units in a stack must be wall-mounted.
• Plan your layout using the IKEA EKET planning tools online or in-store.

Care & Maintenance

Proper care will extend the life of your cabinet.

1. Cleaning: Wipe with a damp cloth wrung in mild soapy water. Dry immediately with a clean, dry cloth.
2. Avoid: Abrasive cleaners, scouring pads, or harsh chemicals which can damage the surface.
3. Protection: Use coasters under glasses and avoid placing hot items directly on surfaces.
4. Inspection: Periodically check that wall mounting brackets and screws are tight.

CAUTION! Never use excessive water. Avoid steam cleaners.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at www.ikea.com.

General Terms: Warranty applies to original purchaser with proof of purchase. Covers material and manufacturing defects under normal home use for the specified period.

Support: For missing parts, assembly help, or warranty claims, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Recycling: At end of life, disassemble and recycle materials according to local regulations. Particleboard can often be recycled at designated facilities.