IKEA EKEDALEN 403.407.62 Bench instructions manual

The IKEA EKEDALEN 403.407.62 is a sturdy wooden bench designed for indoor use, featuring a classic slatted seat design and solid wood construction. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts overview, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Warranty & Support 7. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Name	Quantity	Description
Bench Seat (Slatted)	1	Main seat component with pre-drilled holes
Bench Legs	4	Solid wood legs with mounting plates
Support Rails	2	Cross braces for stability
Wooden Dowels	8	For joining seat to legs
Cam Lock Nuts	4	For securing legs to seat
Allen Key	1	Tool for tightening cam locks
Assembly Manual	1	This instruction booklet

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

Assemble on a soft, clean surface to avoid scratches.
Use only the provided IKEA hardware.
Ensure all connections are tight before use.
Do not exceed maximum load capacity.

WARNING! Bench is heavy; lift with care. Two people recommended for assembly. Do not stand or jump on the bench.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Prepare workspace: Lay out all parts and tools.
Attach legs to seat: Insert wooden dowels into holes on underside of seat. Align legs and press onto dowels.
Secure with cam locks: Insert cam lock nuts into designated holes on legs. Turn clockwise with Allen key until tight.
Install support rails: Slide rails between legs at mid-height. Secure with provided screws.
Final check: Ensure all connections are firm. Bench should not wobble.

CAUTION! Do not overtighten screws; may strip wood. If parts do not align, check orientation.

Specifications

Dimensions (Assembled): Length: 120 cm, Width: 40 cm, Height: 45 cm.
Material: Solid wood (pine or similar), clear lacquer finish.
Weight Capacity: Max 150 kg evenly distributed.
Finish: Natural wood tone; may vary slightly between batches.
Intended Use: Indoor residential use only.
Packaging Weight: Approx. 15 kg.

Care & Maintenance

To maintain appearance and longevity:

Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
Avoid prolonged exposure to direct sunlight or moisture.
Periodically check and tighten connections if needed.
For stains, use mild soap solution; dry immediately.

CAUTION! Do not use wax, polish, or chemical cleaners. May damage finish.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Warranty Period: As per local IKEA policy (typically 1-10 years depending on region).
Support: Visit IKEA store or www.ikea.com for assembly help, spare parts, or returns.
Spare Parts: Available free of charge at IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bench wobbles	Uneven floor or loose connections	Tighten all cam locks and screws; check floor level.
Parts don't fit	Incorrect orientation or assembly step	Review steps; ensure parts are facing correct direction.
Missing hardware	Packaging error	Contact IKEA customer service for replacement parts.
Wood cracks during assembly	Overtightening or forced alignment	Stop assembly; contact IKEA. Do not use damaged part.
Finish appears uneven	Natural wood variation	This is normal; wood grain and color may differ slightly.

Reassembly: If moving, disassemble in reverse order. Keep hardware in labeled bag.

Contact: IKEA customer support at www.ikea.com or your local store.