IKEA EILIF 004.687.95 Support instructions manual

The IKEA EILIF 004.687.95 is a versatile support bracket designed for mounting shelves, TVs, or other fixtures to walls. It features a robust steel construction, adjustable arms, integrated cable management, and a universal mounting pattern compatible with various IKEA and standard fixtures. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mounting and Adjustment 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Steel support bracket, Mounting plate, Adjustable arms, Cable management clips, Wall anchors and screws, Allen key.

Feature	Description
Mounting plate	For secure attachment to wall studs or masonry
Adjustable arms	Extendable from 15" to 30" for flexible positioning
Cable management clips	Integrated clips to organize power and AV cables
Wall anchors	Included for drywall and concrete mounting
Universal VESA pattern	Compatible with 75x75mm to 200x200mm VESA mounts
Level indicator	Built-in bubble level for accurate installation
Tilt adjustment	±15 degrees tilt for optimal viewing angle
Weight capacity	Supports up to 50 lbs (22.7 kg)
Finish	Powder-coated black for durability
Tool included	Allen key for assembly and adjustments

Installation

Unpack and inspect all components. Ensure you have proper tools: drill, stud finder, level, screwdriver.

Locate wall studs: Use stud finder to identify solid mounting points.
Mark drill points: Position mounting plate against wall, mark holes with pencil.
Drill pilot holes: Use appropriate drill bit for wall type (included anchors for drywall).
Secure mounting plate: Attach plate to wall using provided screws and anchors.
Attach bracket arms: Connect adjustable arms to mounting plate using included bolts.
Mount your device: Secure TV or shelf to bracket using appropriate screws.

WARNING! Bracket and mounted item are heavy; use two people for installation. Ensure wall can support total weight.

First-Time Setup

After installation, configure bracket for your specific application.

Adjust arm length: Loosen adjustment knobs, extend arms to desired length, retighten.
Set tilt angle: Loosen tilt knob, adjust to preferred angle (use level), tighten securely.
Organize cables: Route cables through integrated clips for neat appearance.
Test stability: Gently apply pressure to ensure bracket is firmly mounted.

CAUTION! Do not exceed maximum weight limit. Ensure all knobs and screws are fully tightened.

Specifications

Model: EILIF 004.687.95
Material: Steel construction with powder-coated finish
Weight Capacity: 50 lbs (22.7 kg) maximum
Arm Extension: 15" to 30" adjustable
Tilt Range: ±15 degrees
VESA Compatibility: 75x75mm, 100x100mm, 200x200mm patterns
Mounting Hardware: Includes screws, wall anchors, Allen key
Color: Black
Warranty: 10-year limited warranty

Controls and Settings

Adjustment points: Arm length knobs, Tilt adjustment knob, Cable clip releases.

Arm Length: Loosen knobs on each side, slide arms to desired position, retighten knobs firmly.

Tilt Adjustment: Loosen central tilt knob, adjust angle using built-in level, tighten to lock position.

Cable Management: Press clip tabs to open, insert cables, release to secure. Multiple clips accommodate various cable thicknesses.

Leveling: Use integrated bubble level during installation and adjustments to ensure proper alignment.

Connecting Devices

Compatible with TVs, monitors, shelves, and other fixtures with standard mounting patterns.

Verify VESA pattern: Check your device's mounting hole pattern matches bracket compatibility.
Attach mounting screws: Use appropriate length screws (included) to secure device to bracket arms.
Connect cables: Route power, HDMI, and other cables through management clips before final positioning.
Test connections: Ensure all cables are securely connected and not pinched during adjustment.

Tip: Leave some slack in cables to allow for tilt adjustment without strain on connectors.

Mounting and Adjustment

Follow these steps for proper mounting and ongoing adjustments.

Initial mounting: Follow Installation section steps 1-6 for secure wall attachment.
Device attachment: Align device mounting holes with bracket arms, insert and tighten screws.
Position adjustment: Loosen adjustment knobs, position device as desired, retighten all knobs.
Cable organization: Route all cables through clips, ensuring no sharp bends or pinches.
Final check: Verify all connections are secure, device is level, and bracket is stable.
Regular inspection: Periodically check tightness of all screws and knobs.

WARNING! Do not make adjustments while device is powered on. Ensure power is disconnected before repositioning.

Safety Features

Locking knobs: All adjustment points feature locking mechanisms to prevent accidental movement. Weight limit indicator: Clear labeling of 50 lb maximum capacity. Wall anchor system: Included anchors designed for secure mounting in various wall types.

Care & Cleaning

Use soft, dry cloth for cleaning. For stubborn marks, dampen cloth with water only. Do not use abrasive cleaners or chemicals.

CAUTION! Do not spray liquids directly on bracket. Avoid contact with corrosive substances.

Regulatory Information

Complies with international safety standards for furniture and mounting hardware. Tested to exceed minimum safety requirements. Copyright © IKEA of Sweden AB. All rights reserved. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bracket feels loose	Insufficient wall mounting	Ensure mounting plate is secured to wall studs; use included anchors properly.
Device not level	Uneven adjustment	Loosen adjustment knobs, use built-in level to reposition, retighten securely.
Arms won't extend	Knobs too tight/damaged	Loosen knobs completely; check for obstructions; ensure arms are aligned properly.
Cables slipping from clips	Clips not engaged	Press clips firmly until they click; ensure cables are properly seated in channels.
Creaking sounds	Loose connections	Tighten all screws and knobs; check wall mounting for stability.

Reinstallation: If bracket becomes unstable, remove completely and reinstall following all installation steps.

Service: Contact IKEA customer service for replacement parts or warranty claims.