IKEA EDSVIK 304.955.23 Faucet instructions manual

The IKEA EDSVIK 304.955.23 is a single-lever kitchen faucet designed for easy installation and reliable operation. It features a pull-out spray head with multiple spray patterns, ceramic disc cartridge for smooth temperature and flow control, durable chrome finish, and a flexible hose. This manual covers safety, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Connecting to Water Supply 7. Spray Head Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Single-lever handle, pull-out spray head, ceramic disc cartridge, flexible hose, mounting hardware.

Feature	Description
Single-lever handle	Controls both water temperature and flow rate
Pull-out spray head	Extends for flexible use; multiple spray patterns
Ceramic disc cartridge	Durable, drip-free operation with smooth control
Flexible hose	Allows spray head to extend and retract
Chrome finish	Corrosion-resistant and easy to clean
Mounting hardware	Includes all necessary components for installation
Spray pattern selector	Switches between stream and spray modes
Quick-connect fittings	Simplifies connection to water supply lines
Aerator	Reduces splashing and conserves water
Weighted hose	Helps retract spray head automatically

Installation

Unpack and inspect all components. Ensure you have the necessary tools: adjustable wrench, plumber's tape, bucket.

Prepare sink: Ensure mounting hole is clean and free of debris.
Install mounting hardware: Place gasket and mounting plate; secure from below.
Connect water supply: Attach hot and cold supply lines using quick-connect fittings.
Secure faucet: Insert faucet body through mounting hole; tighten mounting nut.
Connect spray hose: Attach hose to faucet body and water lines.

WARNING! Turn off water supply before installation. Check for leaks after installation.

First-Time Setup

After installation, test faucet operation.

Turn on water supply: Slowly open shut-off valves.
Check for leaks: Inspect all connections; tighten if necessary.
Test handle operation: Move lever to ensure smooth temperature and flow control.
Test spray head: Pull out spray head; test stream and spray patterns.
Retract spray head: Ensure weighted hose retracts properly.

CAUTION! Do not overtighten connections. Use plumber's tape on threaded connections.

Specifications

Model: EDSVIK 304.955.23
Type: Single-lever kitchen faucet with pull-out spray
Finish: Chrome
Cartridge: Ceramic disc
Hose Length: 59 inches (150 cm)
Spray Patterns: Stream and spray
Mounting: Single-hole installation
Water Pressure: 20-80 psi (1.4-5.5 bar)
Temperature Range: Up to 140°F (60°C)
Warranty: Limited 10-year warranty

Controls and Operation

Handle controls: Lift to increase flow; move left for hot water, right for cold water.

Spray Head: Pull to extend; press button on spray head to switch between stream and spray patterns. Release to retract.

Temperature memory: Handle returns to previous position when turned off. Flow control: Adjust lever height for desired water flow. Aerator: Reduces splashing and improves water efficiency.

Connecting to Water Supply

Hot and cold water lines: Use included quick-connect fittings.

Turn off main water supply before connecting.
Connect hot water line to left valve (usually marked red).
Connect cold water line to right valve (usually marked blue).
Use plumber's tape on threaded connections to prevent leaks.
Turn on water supply and check for leaks.

Tip: Ensure water lines are not kinked or twisted during installation.

Spray Head Functions

Stream mode: Concentrated flow for filling containers. Spray mode: Wider pattern for rinsing dishes.

Extend spray head: Pull gently until hose is fully extended.
Select pattern: Press button on spray head to switch modes.
Adjust flow: Use lever to control water pressure.
Retract spray head: Release gently; weighted hose will retract automatically.
Clean spray head: Remove aerator periodically to clean debris.

WARNING! Do not pull spray head with excessive force. Avoid sharp bends in hose.

Maintenance & Cleaning

Clean with mild soap and water; dry with soft cloth. Do not use abrasive cleaners.

CAUTION! Do not use harsh chemicals or abrasive pads; avoid vinegar on chrome finish.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Low water pressure	Clogged aerator	Remove and clean aerator; check water supply valves.
Spray head not retracting	Kinked hose or weight issue	Straighten hose; ensure weight moves freely.
Leaking from handle	Worn cartridge	Replace ceramic disc cartridge.
Water temperature inconsistent	Supply line issues	Check hot and cold water supply; adjust mixing valve.
Spray pattern not changing	Debris in spray head	Clean spray head; check selector button.

Reset: Turn off water supply, remove and reinstall cartridge if needed.

Service: Contact IKEA customer service for replacement parts.