IKEA EBBEMÅLA 805.182.49 Floor Lamp instructions manual

The IKEA EBBEMÅLA 805.182.49 is a modern floor lamp featuring a sleek metal frame, adjustable shade, energy-efficient LED bulb (included), touch-sensitive dimmer control, stable weighted base, and a minimalist Scandinavian design. Suitable for living rooms, bedrooms, or reading corners. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Operation & Controls 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Adjustable metal shade, weighted circular base, integrated LED light source, touch-sensitive dimmer, and minimalist Scandinavian design.

Feature	Description
Adjustable Shade	Tilt and rotate for directional lighting
Integrated LED	Energy-efficient, long-life bulb included (non-replaceable)
Touch Dimmer	Touch base to turn on/off and adjust brightness levels
Weighted Base	Provides stability and prevents tipping
Power Cord	6-foot cord with plug
Materials	Steel frame, plastic shade, weighted metal base
Height Adjustment	Fixed height of 55 inches (140 cm)
Design	Minimalist Scandinavian, matte black finish

Package Contents

Unpack and verify all parts are included before assembly.

Base section (weighted)
Main pole (2 sections)
Adjustable lamp head/shade
Power cord with plug
Assembly hardware (screws, bolts)
Instruction manual (this document)

IMPORTANT! Check for any shipping damage before assembly. Contact IKEA if parts are missing or damaged.

Safety Instructions

Read all instructions before assembly and use.

Use only with 120V AC, 60Hz power source.
Do not disassemble or modify the integrated LED light source.
Place on stable, level surface to prevent tipping.
Keep away from water, moisture, and heat sources.
Do not cover lamp shade while in operation.
Unplug before cleaning or maintenance.
Not intended for outdoor use.

WARNING! Risk of electric shock if mishandled. Keep cord away from heated surfaces and foot traffic.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Phillips screwdriver (optional).

Attach base: Place weighted base on floor. Insert bottom pole section into base and tighten screw securely.
Connect pole sections: Insert top pole section into bottom section. Align and tighten set screw.
Attach lamp head: Place lamp head onto top pole. Secure with provided bolt and washer.
Route power cord: Thread cord through pole sections and out base opening.
Final check: Ensure all connections are tight and lamp head moves smoothly.
Plug in: Connect power cord to wall outlet.

CAUTION! Do not overtighten screws. Ensure lamp is stable before use.

Operation & Controls

Touch-sensitive dimmer located on the base or lower pole (model dependent).

Operation:

Touch once: Turn on to low brightness.
Touch again: Increase to medium brightness.
Touch third time: Increase to high brightness.
Touch fourth time: Turn off.

Adjustment: Tilt shade up/down and rotate left/right for desired light direction.

Note: Lamp remembers last brightness setting when turned off and on again.

Specifications

Model: EBBEMÅLA 805.182.49
Height: 55 inches (140 cm)
Base Diameter: 9.8 inches (25 cm)
Light Source: Integrated LED, non-replaceable
Luminous Flux: 800 lumens
Color Temperature: 2700K (warm white)
Dimmable: Yes, via touch control (3 levels)
Power Consumption: 10W (equivalent to 60W incandescent)
Input Voltage: 120V AC, 60Hz
Cord Length: 6 feet (1.8 meters)
Weight: 8.8 lbs (4 kg)
Materials: Steel, plastic, weighted metal base
Color: Matte Black

Care & Maintenance

Unplug lamp before cleaning.

Use dry, soft cloth to wipe frame and base.
For shade, use soft brush or dry cloth to remove dust.
Do not use liquid cleaners, abrasives, or solvents.
Store in dry place when not in use for extended periods.

CAUTION! Never immerse lamp in water or other liquids. Do not use spray cleaners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage	Check power outlet; try different outlet; ensure plug is secure.
Touch control not responding	Dirty surface / Power issue	Clean touch area with dry cloth; unplug for 30 seconds then reconnect.
Lamp flickers	Loose connection	Check all assembly connections; ensure pole sections are tight.
Lamp unstable	Base not level / Loose screw	Place on level surface; tighten base screw.
Light output dim	Touch set to low brightness	Touch control to cycle through brightness levels.

Reset: Unplug for 1 minute, then reconnect to reset touch control memory.

Warranty & Support

IKEA limited warranty: 1 year from date of purchase against manufacturing defects. Proof of purchase required.

For support:

Visit: www.ikea-usa.com
Call: 1-888-888-4532
Visit your local IKEA store

Recycling: Dispose of according to local electronic waste regulations. Do not dispose with household trash.