IKEA DEJSA 704.049.84 Table Lamp instructions manual

The IKEA DEJSA 704.049.84 is a modern table lamp designed for ambient lighting. It features a stable base, a fabric shade, an integrated on/off switch on the cord, and uses a standard E27 bulb (max 15W LED or equivalent, not included). Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Care & Cleaning 8. Safety Information 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Fabric shade, Metal/plastic base, Cord with integrated switch, E27 bulb socket.

Feature	Description
Shade	Fabric, diffuses light for soft illumination
Base	Provides stability and houses the socket
Cord with switch	Integrated on/off switch for easy control
Bulb Socket	Standard E27 (Edison screw) type
Recommended Bulb	Max 15W LED or equivalent energy-saving bulb

Assembly Instructions

Unpack all parts and check contents. Ensure you have a clean, flat workspace.

Attach the base: If separate, screw or click the base components together as per the included pictorial guide.
Install the bulb: Screw an E27 bulb (max 15W LED, not included) into the socket. Do not overtighten.
Attach the shade: Align the shade with the holder on the base and secure it by pressing or screwing it into place.
Position the lamp: Place the assembled lamp on a stable, level surface away from edges.

WARNING! Ensure the lamp is unplugged during assembly. Do not use a bulb exceeding the maximum wattage.

First-Time Setup

After assembly, plug the lamp into a standard wall outlet.

Plug in: Insert the plug into a 120V AC outlet.
Power on: Use the integrated switch on the cord to turn the lamp on.
Test bulb: Ensure the bulb illuminates properly.
Adjust placement: Position the lamp for desired lighting effect, ensuring the cord is not a tripping hazard.

CAUTION! Do not place the lamp near flammable materials, water, or in enclosed fixtures not rated for it.

Specifications

Model: DEJSA 704.049.84
Type: Table Lamp
Socket: E27 (Edison screw)
Max Bulb Power: 15W LED or equivalent (Bulb not included)
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 6 feet (1.8 meters)
Switch: Integrated on/off switch on cord
Materials: Fabric shade, Metal/plastic base

Controls and Operation

Operation is simple via the integrated cord switch.

On/Off: Use the rocker or button switch located on the power cord.

Light Adjustment: The light level is controlled by the bulb's wattage and type. For dimming, use only a compatible dimmable LED bulb and an external dimmer switch installed in the wall outlet (if applicable and safe). The lamp's built-in switch does not dim.

Bulb Replacement

Always turn off and unplug the lamp before replacing the bulb.

Allow the old bulb to cool completely if it was recently on.
Gently unscrew the old bulb counterclockwise.
Screw in a new E27 bulb (max 15W LED or equivalent) clockwise until snug. Do not overtighten.
Plug in the lamp and turn it on to test.

Tip: Use a soft cloth when handling bulbs to avoid fingerprints on glass surfaces.

Care & Cleaning

Unplug the lamp and let it cool before cleaning.

Shade: Use a soft brush or vacuum cleaner with a soft brush attachment to remove dust. Do not wash the fabric shade.
Base and Cord: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Bulb: Wipe with a dry cloth when cool.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Safety Information

This lamp is for indoor use only.
Use only with a maximum 15W LED bulb or equivalent energy-saving bulb to prevent overheating.
Do not cover the lamp or shade while in use, as this may cause overheating.
Keep out of reach of young children.
Do not use the lamp if the cord or plug is damaged.
Do not attempt to disassemble or repair the lamp yourself beyond bulb replacement.

Regulatory Information

This product complies with applicable safety standards. For electrical products, it is designed for use in 120V AC, 60Hz systems. Copyright and design rights belong to Inter IKEA Systems B.V. For more information or support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check if outlet works; replace bulb; ensure bulb is screwed in properly and plug is fully inserted.
Lamp flickers	Loose bulb / Incompatible bulb	Turn off, check and tighten bulb. Ensure bulb is not a non-dimmable bulb used on a dimmer circuit.
Lamp gets very hot	Bulb wattage too high	Immediately turn off and unplug. Replace with a bulb of 15W LED or lower equivalent.
Shade is unstable	Not properly attached	Turn off lamp, ensure shade is correctly and securely fastened to the base.
Switch does not work	Internal fault	Stop using the lamp. Contact IKEA customer service for advice or replacement.

Disposal: Dispose of the lamp and bulbs according to local electronic waste and recycling regulations.

Service: For warranty and support, contact IKEA customer service or visit www.ikea.com.