IKEA DEJSA 004.049.87 Table Lamp instructions manual

The IKEA DEJSA 004.049.87 is a modern table lamp designed for ambient lighting. It features a sturdy base, an adjustable shade, an E26/E27 socket compatible with LED, CFL, or incandescent bulbs (max 13W LED/15W CFL/40W incandescent), an integrated on/off switch, and a 1.8-meter power cord. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Adjustable fabric shade, Metal base, E26/E27 lamp socket, Integrated on/off switch, 1.8m power cord.

Assembly Instructions

Unpack all parts and check contents against included list.

1. Attach base to stem: Screw the metal stem into the pre-threaded hole in the base until hand-tight.
2. Install socket: Place the socket assembly onto the top of the stem and secure with provided screw.
3. Attach shade: Slide the fabric shade over the socket and secure with the finial (decorative nut) by twisting clockwise.
4. Route cord: Ensure the power cord runs neatly along the stem and out from the base.

WARNING! Assemble on a soft surface to avoid scratching. Do not overtighten parts.

First-Time Setup

After assembly, prepare the lamp for use.

1. Choose location: Place on a stable, flat, dry surface away from edges.
2. Install bulb: Screw in a compatible bulb (see Specifications) into the socket. Do not exceed wattage.
3. Plug in: Connect the power cord to a standard 120V AC wall outlet.
4. Test operation: Flip the integrated switch to the ON position to verify lighting.

CAUTION! Ensure the lamp is unplugged before installing or replacing the bulb.

Specifications

• Model: DEJSA 004.049.87
• Dimensions (assembled): Height: 16", Base diameter: 6"
• Socket Type: E26/E27 (Standard)
• Max Bulb Wattage: 13W LED / 15W CFL / 40W Incandescent
• Power Cord: 1.8 meters, 2-prong plug (non-polarized)
• Switch: Integrated on/off (inline or on base)
• Voltage: 120V AC, 60Hz
• Weight: 2.2 lbs (1 kg)
• Materials: Base/Stem: Steel; Shade: Polyester fabric; Fittings: Plastic

Controls and Operation

Operation is straightforward via the integrated switch.

On/Off: Use the rocker or toggle switch located on the power cord or lamp base.

Adjustment: Gently tilt or rotate the fabric shade to direct light where needed. Do not force beyond its natural range of motion.

Note: This lamp does not feature a dimmer. Use with a dimmable bulb and external dimmer switch only if compatible.

Bulb Replacement

Always turn off and unplug the lamp before replacing the bulb.

1. Allow bulb to cool completely if it was recently on.
2. Gently grip the bulb and turn counterclockwise to remove.
3. Insert a new, compatible bulb and turn clockwise until snug.
4. Plug in the lamp and turn on to test.

WARNING! Never use a bulb with a wattage higher than specified. This can cause overheating and fire risk.

Safety Features

Standard safety design: Stable base to prevent tipping. Insulated socket and wiring. Use only with compatible, undamaged bulbs.

Important: This is not a sealed fixture. Do not use in wet or damp locations (e.g., bathroom) unless rated accordingly.

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

1. Shade: Use a soft brush or vacuum cleaner with a soft brush attachment to remove dust. Do not wash.
2. Base and Stem: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners.
3. Cord: Wipe with a dry cloth. Check regularly for damage.

CAUTION! Never immerse the lamp in water or use liquid cleaners directly on any part.

Regulatory Information

This product complies with applicable UL standards for safety. It is intended for indoor use in dry locations only. Copyright and design rights belong to Inter IKEA Systems B.V. For more information, recycling guidelines, or support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Disposal: Dispose of according to local regulations. Separate materials where possible.

Support: IKEA Customer Service: 1-888-888-4532; www.ikea.com