IKEA DANDERYD 505.161.43 Bench instructions manual

The IKEA DANDERYD 505.161.43 is a versatile wooden bench designed for indoor use, featuring a clean Scandinavian design with solid wood construction. This manual provides essential information for safe assembly, proper use, care, and maintenance of your bench. Below are key sections covering safety warnings, parts identification, step-by-step assembly, usage guidelines, and troubleshooting.

1. Safety Information 2. Parts & Tools Included 3. Assembly Instructions 4. Product Specifications 5. Care & Maintenance 6. Usage Guidelines 7. Warranty Information 8. Troubleshooting

Safety Information

Important safety warnings and precautions for assembly and use.

Warning	Description
Assembly Surface	Assemble on a soft, clean surface to prevent scratching the wood.
Tool Safety	Use included tools only as directed; keep away from children.
Weight Limit	Maximum load capacity: 200 lbs (90 kg) distributed evenly.
Child Safety	Do not allow children to climb or stand on the bench.
Stability Check	Ensure all screws and joints are tight before use.
Indoor Use Only	Designed for indoor use; avoid exposure to moisture or extreme temperatures.

Parts & Tools Included

Check that all parts are present before starting assembly.

Bench Seat: 1 piece - Solid wood panel.
Bench Legs: 4 pieces - Tapered wooden legs.
Support Rails: 2 pieces - Connecting rails for stability.
Hardware Pack: Contains screws, dowels, and cam locks.
Allen Key: 1 piece - For tightening cam locks.

WARNING! Do not discard packaging until assembly is complete and all parts are verified.

Assembly Instructions

Follow these steps carefully for proper assembly.

Lay the bench seat upside down on a protected surface.
Insert dowels into pre-drilled holes on the underside of the seat.
Attach support rails to the seat using provided screws.
Align legs with dowels and support rail brackets; press firmly into place.
Secure legs using cam locks; tighten with the Allen key until snug.
Turn the bench upright and place on a level floor.
Check stability by applying gentle pressure; tighten any loose connections.

CAUTION! Do not overtighten screws or cam locks, as this may damage the wood.

Product Specifications

Product Name: DANDERYD Bench
Article Number: 505.161.43
Dimensions: Length: 47.25" (120 cm), Width: 15.75" (40 cm), Height: 17.75" (45 cm)
Material: Solid pine, Clear acrylic lacquer finish
Weight Capacity: 200 lbs (90 kg)
Weight: 15.4 lbs (7 kg)
Designer: IKEA of Sweden

Care & Maintenance

Proper care will extend the life and appearance of your bench.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or excessive water.

Protection: Avoid placing in direct sunlight or near heat sources to prevent fading or warping. Use coasters or pads under objects to prevent scratches.

Periodic Check: Every 3 months, check and tighten any loose screws or cam locks to maintain stability.

Usage Guidelines

Recommended uses and limitations for your bench.

Designed as seating or as a decorative surface in entryways, bedrooms, or living areas.
Do not use as a step stool, ladder, or for standing.
Place on a flat, stable surface to prevent wobbling.
For added floor protection, attach felt pads to the bottom of the legs.

Tip: The bench can be accessorized with cushions or throws for added comfort and style.

Warranty Information

IKEA Limited Warranty: This product is covered by a 10-year limited warranty against manufacturing defects in materials and workmanship under normal household use. Proof of purchase is required. Warranty does not cover damage from accidents, misuse, improper assembly, or exposure to outdoor conditions. For warranty claims, contact IKEA customer service with your article number and receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bench wobbles	Uneven floor or loose connections	Check floor level; tighten all screws and cam locks.
Legs not fitting	Dowels misaligned	Ensure dowels are fully inserted into seat holes before attaching legs.
Screws not tightening	Stripped threads or cross-threading	Do not force; remove screw and inspect hole. Use a slightly larger screw if necessary.
Scratches on surface	Assembly on hard surface	Assemble on a soft blanket or carpet. Minor scratches can be touched up with a matching wood marker.
Cam lock not locking	Cam not turned fully	Use Allen key to turn cam a full 90 degrees until a click is heard.

Missing Parts? Contact IKEA customer service for replacement parts: 1-800-434-4532 or visit www.ikea-usa.com.

Assembly Help: Video instructions available on the IKEA website under product support.