IKEA DANDERYD 094.783.99 Table instructions manual

The IKEA DANDERYD 094.783.99 is a versatile table designed for assembly, featuring a modern aesthetic suitable for various rooms. It is constructed from particleboard, fiberboard, and plastic edging, with a white or oak veneer finish. The table requires customer assembly and includes all necessary hardware and tools. Below are key sections for safety, parts identification, assembly steps, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Dimensions & Specifications 5. Care & Maintenance 6. Warranty & Support 7. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part Name	Quantity	Description/Image Ref.
Tabletop	1	Main surface panel
Legs	4	Adjustable or fixed legs
Frame/Underframe	1 set	Support structure
Screws (type A)	8	For attaching legs to frame
Screws (type B)	12	For attaching frame to tabletop
Cam locks + bolts	4 sets	For connecting frame parts
Allen key	1	Included tool for assembly
Instruction manual	1	This document

Note: Check packaging for small parts bag. Do not discard until assembly is complete.

Safety Information

Read all instructions before beginning assembly. Ensure a safe workspace.

Work Area: Choose a clean, flat, spacious surface (e.g., carpet or soft floor) to avoid scratching parts.
Lifting: The tabletop is large and may be heavy. Use two people to lift and position it.
Children & Pets: Keep small parts away from children and pets during assembly to prevent choking hazards.
Tool Use: Use only the provided tools. Overtightening screws can damage the material.
Stability: Ensure all connections are tight and the table is level before use.

WARNING! Do not stand or sit on the table. It is designed for normal household use as a table only.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Prepare Frame: Connect the long and short sides of the underframe using the cam locks and bolts. Tighten cam locks a quarter-turn with the Allen key until firm.
Attach Legs: Screw the four legs into the pre-drilled holes at each corner of the assembled frame using the Type A screws. Hand-tighten first.
Position Tabletop: With help, place the tabletop upside down on a protected surface. Position the assembled frame (legs pointing up) onto the back of the tabletop, aligning the screw holes.
Secure Tabletop: Using the Type B screws, attach the frame to the tabletop. Start at one corner and work diagonally. Tighten all screws securely but do not overtighten.
Flip Table: Carefully flip the table upright with assistance. Place it in its desired location.
Final Check: Ensure the table is stable and does not wobble. Adjust leg feet if necessary (some models include adjustable glides).

Tip: If the table wobbles on an uneven floor, adjust the adjustable glides at the bottom of the legs.

Dimensions & Specifications

Model Number: DANDERYD 094.783.99
Tabletop Dimensions: 120 cm L x 70 cm W (approx. 47 1/4" x 27 1/2")
Height: 74 cm (approx. 29 1/8")
Material: Particleboard, Fiberboard, Plastic edging, Acrylic paint, Foil
Finish: White / Oak veneer effect
Max Load: 50 kg (evenly distributed)
Weight (packaged): Approx. 25 kg
Designer: IKEA of Sweden

Care & Maintenance

Proper care will extend the life and appearance of your table.

Cleaning: Wipe with a damp cloth and a mild household cleaner. Wipe dry immediately.
Stains: For stubborn stains, use a mild soap solution. Do not use abrasive cleaners, scouring pads, or solvents.
Protection: Use coasters under glasses and cups to prevent rings and heat marks. Use placemats or a tablecloth for added protection.
Moisture: Avoid prolonged exposure to moisture or direct sunlight to prevent warping or fading.
Moving: Lift the table to move it; do not drag it across the floor.

CAUTION! Never place hot pots, pans, or heated appliances directly on the surface. Always use a trivet.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions.

Warranty Period: Varies by country. Typically covers material and manufacturing defects.
Support: For missing parts, assembly questions, or warranty claims:
- Visit the IKEA store where you made your purchase.
- Contact IKEA Customer Support online at www.ikea.com.
- Have your receipt and product name/number (DANDERYD 094.783.99) ready.
Recycling: At end of life, disassemble and recycle materials according to local regulations.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor; Legs not tightened equally; Frame not square	Adjust glides on legs; Check and re-tighten all leg and frame connections; Ensure frame was assembled squarely on a flat surface.
Screw won't tighten	Stripped thread; Cross-threaded	Do not force. Back screw out and inspect hole. If thread is damaged, contact IKEA for a replacement part.
Part seems damaged or missing	Packaging error; Overlooked in box	Check all packaging material thoroughly. Contact IKEA customer service with your receipt for replacement parts.
Cam lock won't turn/lock	Bolt not fully inserted; Cam lock misaligned	Ensure the bolt is fully screwed into the receiving part. Align the cam lock arrow with the bolt head before turning.
Scratches on surface after assembly	Assembled on hard surface without protection	Place a blanket or cardboard under parts during future assemblies. Minor scratches can sometimes be concealed with a matching wax pencil.

Note: For persistent issues not resolved above, visit www.ikea.com or your local IKEA store for assistance.