IKEA BÖJA 901.550.40 Table Lamp instructions manual

The IKEA BÖJA 901.550.40 is a stylish table lamp featuring a distinctive, curved shade design, providing ambient and focused lighting. It includes an E26/E27 socket, requires a max 15W LED bulb (not included), an integrated on/off switch on the cord, and a fabric-covered power cord. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

Features at a Glance

Key components: Curved metal shade, stable base, E26/E27 bulb socket, fabric-covered power cord with integrated switch.

Package Contents

1. BÖJA lamp shade (pre-assembled)
2. Lamp base
3. Fabric-covered power cord with switch
4. Socket assembly with harp
5. Hardware pack (screws, if required)
6. Instruction manual

NOTE: Light bulb is not included.

Safety Instructions

WARNING! Risk of electric shock and fire.

1. Disconnect from power before assembly, installation, or cleaning.
2. Use only a max 15W LED bulb (E26/E27 base). Do not exceed recommended wattage.
3. Ensure the lamp is placed on a stable, level, heat-resistant surface.
4. Keep away from water, moisture, and flammable materials.
5. Do not use if the cord or plug is damaged.
6. This lamp is for indoor use only.
7. Do not modify the lamp or its electrical components.

Assembly & Installation

Assembly is minimal. Follow these steps:

1. Prepare: Unpack all parts on a clean, soft surface.
2. Attach Base: If separate, align the base with the lower stem and secure with provided screw(s).
3. Install Harp & Socket: The harp (wire frame) may be pre-installed. If not, slide it onto the socket base.
4. Wire the Socket (if required): Most models come pre-wired. If not, follow color coding (black to brass, white to silver, green to green ground screw).
5. Attach Shade: Place the curved shade onto the harp and secure with the finial (decorative nut) by screwing it clockwise onto the harp's threaded post.
6. Install Bulb: Screw in a compatible LED bulb (max 15W) into the socket.
7. Final Check: Ensure all parts are secure and the lamp is stable.

CAUTION! Do not plug in until assembly is complete and bulb is installed.

Specifications

• Model: BÖJA 901.550.40
• Type: Table Lamp
• Bulb: 1 x E26/E27 base, max 15W LED (not included)
• Power Supply: 120V AC, 60Hz (for North America)
• Cord Length: Approx. 6 ft (1.8 m)
• Switch: In-line on cord
• Dimensions (HxW): ~14.2" x 9.8" (36 cm x 25 cm)
• Weight: Approx. 2.2 lbs (1 kg)
• Material: Metal, Plastic
• Color: Black
• Intended Use: Indoor residential

Operation

1. Positioning: Place the lamp on a stable table or desk near a power outlet.
2. Power: Plug the cord into a standard 120V wall outlet.
3. Turning On/Off: Use the switch on the power cord.
4. Light Adjustment: The curved shade directs light. Reposition the lamp to aim light as needed.

Tip: Use with a dimmable LED bulb and compatible dimmer switch for adjustable light levels (dimmer not included).

Care & Cleaning

1. Always unplug the lamp and let it cool completely before cleaning.
2. Exterior: Wipe the metal shade and base with a soft, dry or slightly damp cloth. Do not use abrasive cleaners.
3. Fabric Cord: Gently wipe with a dry cloth. Do not immerse in water.
4. Bulb: Clean only when cool with a dry cloth.

CAUTION! Never use liquid or aerosol cleaners directly on the lamp. Avoid getting moisture into electrical parts.

Troubleshooting

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at purchase or on www.ikea.com.

For assistance:

• Visit: www.ikea.com
• Contact your local IKEA store.
• North America: 1-888-888-4532

Recycling: Dispose of this product and any electronic components according to local regulations. Do not dispose of with household waste.