IKEA BUNKEFLO 104.883.97 Lighting instructions manual

The IKEA BUNKEFLO 104.883.97 is a modern LED lighting solution designed for easy installation and energy-efficient operation. This manual covers safety information, product features, step-by-step installation, operation, maintenance, and troubleshooting. Ensure you read all instructions before assembly and use.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Installation Instructions 5. Specifications 6. Operation & Controls 7. Connecting to Power 8. Dimming & Light Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, mounting brackets, power adapter, remote control (if included), wall mount hardware.

Feature	Description
LED Panel	Energy-efficient, long-lasting LED light source
Mounting Brackets	For secure wall or ceiling installation
Power Adapter	Converts AC power to low-voltage DC
Remote Control	For wireless operation (on select models)
Dimmable Function	Adjustable brightness levels
Color Temperature	Selectable warm/cool white light
Power Switch	Manual on/off control
Mounting Screws	Included for installation
User Manual	This instruction guide
Warranty Card	Product warranty information

Safety Information

Important safety instructions to prevent injury and damage.

Disconnect power before installation or maintenance.
Use only with specified power adapter (included).
Do not install near heat sources or in damp locations unless rated for such use.
Ensure mounting surface can support the light's weight.
Keep away from children during installation.

WARNING! Risk of electric shock. Have installation performed by qualified person if unsure. Do not modify product.

Package Contents

Verify all parts are included before beginning installation.

LED Light Panel: 1 unit
Mounting Brackets: 2 pieces
Power Adapter: 1 unit (input: 100-240V AC, output: 24V DC)
Remote Control: 1 unit (with batteries, if included)
Screws & Wall Plugs: Set for mounting
User Manual: This document
Warranty Information: 1 card

Note: Contact IKEA if any items are missing. Do not use substitute parts.

Installation Instructions

Follow these steps for proper installation.

Choose location: Ensure flat, stable surface away from obstructions.
Mark mounting points: Use bracket as template to mark screw positions on wall/ceiling.
Drill holes: Use appropriate drill bit for wall type (included wall plugs for masonry).
Attach brackets: Secure brackets with provided screws.
Mount light panel: Align panel with brackets and secure according to instructions.
Connect power: Plug adapter into outlet, connect DC plug to light input.
Test operation: Turn on to verify proper function.

CAUTION! Use correct tools. Ensure power is off during installation.

Specifications

Model: BUNKEFLO 104.883.97
Light Source: LED, non-replaceable
Power Consumption: 20W
Lumen Output: 1600 lm
Color Temperature: 3000K (Warm White) / 4000K (Cool White) - selectable
CRI: >80
Input Voltage: 24V DC via adapter
Adapter Input: 100-240V AC, 50/60Hz
Dimensions: 600mm x 600mm x 15mm
Weight: 2.5 kg
Operating Temperature: 0°C to 40°C
Lifespan: 25,000 hours

Operation & Controls

Operating the light panel.

Manual Control: Use power switch on light or power adapter.

Remote Control (if included): POWER button, DIM +/-, COLOR TEMP (warm/cool), MEMORY preset.

Settings: Adjust brightness with DIM buttons. Toggle between warm white (3000K) and cool white (4000K) using COLOR TEMP button. Save preferred setting with MEMORY button.

Note: Remote requires line-of-sight to IR receiver on light panel.

Connecting to Power

Power connection procedure.

Ensure power switch is off.
Plug DC connector into light panel input port.
Plug power adapter into standard wall outlet (100-240V AC).
Turn on power switch.

Tip: Use surge protector for added safety. Do not overload electrical circuit.

Dimming & Light Settings

Adjusting light output and color.

Brightness: Press DIM + to increase, DIM - to decrease. 10 levels available.
Color Temperature: Press COLOR TEMP to toggle between warm white and cool white.
Memory Function: Hold MEMORY button for 3 seconds to save current brightness/color setting.
Reset: Hold POWER button on remote for 10 seconds to restore factory defaults.

Note: Dimming may not be compatible with all external dimmer switches. Use only included remote for dimming.

Care & Maintenance

Cleaning and maintenance guidelines.

Unplug from power before cleaning. Use dry, soft cloth to wipe light surface. For stubborn dirt, use slightly damp cloth with mild detergent. Do not use abrasive cleaners or solvents.

CAUTION! Do not immerse in water. Do not disassemble—no user-serviceable parts inside.

Regulatory Information

Compliance and copyright information.

This product complies with relevant EU directives and standards. CE marked. RoHS compliant. Copyright © IKEA of Sweden AB. All rights reserved. For support, visit www.ikea.com or contact your local IKEA store. Dispose of according to local electronic waste regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power	Check power outlet; ensure adapter is plugged in; verify switch is on.
Dim light or flickering	Loose connection	Check DC connector; ensure secure connection at both ends.
Remote not working	Batteries/obstruction	Replace remote batteries; ensure line-of-sight to IR receiver.
Wrong color temperature	Setting error	Press COLOR TEMP button to cycle through options.
Overheating	Ventilation blocked	Ensure at least 10cm clearance around light; do not cover.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: For persistent issues, contact IKEA customer service. Do not attempt repair yourself.