IKEA BRÅVIKEN 093.961.91 Sink instructions manual

The IKEA BRÅVIKEN 093.961.91 is a stainless steel double bowl kitchen sink designed for durability and easy cleaning. It features two equal-sized bowls, a satin finish to minimize water spots and scratches, pre-drilled holes for faucet and accessories, and is compatible with most standard kitchen cabinets. Below are key sections for safety, features, installation, care, and troubleshooting.

Features at a Glance

Key components: Stainless steel double bowl sink, mounting clips, template, installation instructions.

Package Contents

Unpack and verify all parts before installation.

1. BRÅVIKEN stainless steel sink (1 piece)
2. Mounting clips (set of 6-8)
3. Template for cutting countertop
4. Drain assembly kits (2 sets: basket strainer, tailpiece, locknut, washer)
5. Installation manual (this document)
6. Warning labels and warranty information

WARNING! Inspect sink for damage before installation. Do not install if damaged.

Safety Information

Read all instructions before beginning installation.

1. Work with a partner: The sink is heavy and awkward to handle alone.
2. Wear safety gloves and goggles when cutting countertop or drilling.
3. Ensure countertop is level and cabinet is structurally sound.
4. Disconnect water supply and power to any nearby appliances before starting.
5. Keep work area clean and free of obstructions.

CAUTION! Sharp edges may be present. Handle with care to avoid injury.

Specifications

• Model Number: 093.961.91
• Product Name: BRÅVIKEN
• Color/Finish: Stainless steel, satin
• Material Thickness: 18 gauge (1.0mm)
• Overall Dimensions: 33" W x 22" D (84cm x 56cm)
• Bowl Dimensions: Each bowl 14.5" W x 16" D x 8" H (37cm x 40cm x 20cm)
• Weight: Approx. 28 lbs (12.7 kg)
• Installation Type: Undermount (primary) or topmount
• Required Cabinet Size: Minimum 36" width, 24" depth
• Warranty: Limited 25-year warranty against rust-through

Tools Required

Gather these tools before starting installation.

Essential Tools: Measuring tape, pencil, jigsaw with fine-tooth blade, drill with hole saw bits, screwdriver (flat and Phillips), adjustable wrench, silicone caulk gun, level, safety gloves, goggles.

Additional Materials: 100% silicone sealant (clear or color-matched), plumber's putty or silicone gaskets, pipe wrench, bucket/rags for water.

Installation Instructions

Follow these steps for proper undermount installation.

1. Prepare Cabinet: Ensure cabinet is clean, level, and can support sink weight. Reinforce if necessary.
2. Template Placement: Position template on countertop where sink will be installed. Center in cabinet opening. Trace outline with pencil.
3. Cut Countertop: Drill starter hole inside traced line. Use jigsaw to cut along line. Sand edges smooth.
4. Test Fit: Place sink into cutout from below. Ensure it sits flush and centered. Adjust opening if needed.
5. Apply Sealant: Run bead of silicone sealant along top edge of sink flange (where it contacts countertop).
6. Mount Sink: Lift sink into position from below. Secure with mounting clips: attach clips to sink flange, then tighten screws into countertop underside. Wipe away excess sealant.
7. Cure Time: Allow silicone to cure 24 hours before connecting plumbing or applying weight.

Tip: For topmount installation, apply sealant to underside of sink rim, place into cutout, and clamp from below.

Connecting Plumbing

Install drain assemblies and connect to existing pipes.

1. Install Strainers: Apply plumber's putty or silicone gasket to underside of basket strainer. Insert into drain hole from top. From below, attach rubber washer, cardboard friction ring, and locknut. Tighten securely.
2. Attach Tailpieces: Screw tailpiece into strainer. Use slip nut and washer to connect.
3. Connect P-Trap: Attach P-trap to tailpiece and existing waste pipe. Ensure all connections are hand-tightened, then use wrench for final quarter-turn.
4. Faucet Installation: Insert faucet through pre-drilled hole(s). Secure from below with mounting hardware provided with faucet.
5. Connect Water Lines: Attach supply lines to faucet valves and shut-off valves. Hand-tighten, then use adjustable wrench for final snug fit.

WARNING! Do not overtighten connections to avoid cracking strainer or pipes.

Sealing and Water Testing

Ensure all connections are watertight before regular use.

1. Slowly turn on water supply valves. Check for leaks at faucet connections, supply lines, and drain assemblies.
2. Fill both bowls with water. Let sit for 5 minutes. Check underside for any seepage.
3. Pull drain plugs. Observe drainage speed and check P-trap connections for leaks.
4. If leaks are found, turn off water, dry area, and re-tighten or reseal problematic connection.
5. Once leak-free, allow silicone sealant to fully cure (24 hours) before placing heavy items in sink.

CAUTION! Do not use sink until all leaks are resolved and sealant is fully cured.

Care & Cleaning

Proper maintenance will keep your sink looking new.

• Daily Cleaning: Rinse with warm water and mild dish soap. Wipe dry with soft cloth to prevent water spots.
• Stain Removal: Use baking soda paste or stainless steel cleaner. Always wipe with grain of finish.
• Avoid Abrasives: Do not use steel wool, scouring powders, or bleach-based cleaners.
• Prevent Damage: Use sink grid or mat to protect bottom from scratches. Avoid dropping heavy objects.
• Hard Water: Remove mineral deposits with vinegar solution, then rinse thoroughly.

CAUTION! Do not use chlorine bleach or oven cleaners; they can damage finish.

Warranty Information

IKEA BRÅVIKEN sink carries a limited 25-year warranty against rust-through under normal residential use. Warranty does not cover scratches, dents, discoloration, or damage from improper installation, cleaning, or accidents. Proof of purchase required. For warranty claims, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

For Support: Visit www.ikea.com or call IKEA customer service at 1-800-434-4532.