IKEA BROGRUND 994.900.85 Faucet instructions manual

The IKEA BROGRUND 994.900.85 is a single-lever kitchen faucet designed for easy installation and operation. It features a pull-out spray head with multiple spray patterns, ceramic disc cartridge for smooth control and durability, water-saving aerator, and a flexible hose. Constructed from chrome-plated brass for corrosion resistance. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Water Supply 7. Operation 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Single-lever handle, Pull-out spray head with spray pattern selector, Ceramic disc cartridge, Flexible hose, Aerator, Mounting hardware.

Feature	Description
Single-lever handle	Controls both water temperature and flow rate
Pull-out spray head	Extends for flexible use; includes spray pattern selector
Ceramic disc cartridge	Ensures smooth operation and long service life
Flexible hose	Allows spray head to be pulled out and retracted
Aerator	Mixes air with water to reduce splashing and save water
Mounting hardware	Includes all necessary parts for standard sink installation
Spray pattern selector	Switches between stream and spray modes
Water-saving design	Complies with water efficiency standards
Chrome-plated brass	Durable and corrosion-resistant construction
Retraction mechanism	Automatically retracts hose when released

Installation

Unpack and inspect all components. Ensure sink has appropriate mounting holes.

Prepare sink area: Clean mounting surface and ensure it's dry.
Install mounting hardware: Insert base plate and secure with provided nuts.
Connect water supply lines: Attach hot and cold water lines to corresponding valves.
Secure faucet body: Insert faucet through mounting hole and tighten from below.
Connect spray hose: Attach hose to faucet body and water supply lines.
Test for leaks: Turn on water supply and check all connections.

WARNING! Shut off main water supply before installation. Use two wrenches to avoid damaging connections.

First-Time Setup

After installation, perform initial setup and testing.

Remove aerator: Unscrew aerator from spray head to flush debris from new pipes.
Flush system: Run hot and cold water for 2-3 minutes each.
Reinstall aerator: Screw aerator back onto spray head securely.
Test spray patterns: Use selector button to switch between stream and spray modes.
Check retraction: Ensure hose retracts smoothly into place.

CAUTION! Water may be hot. Test temperature carefully before full use.

Specifications

Model: BROGRUND 994.900.85
Type: Single-lever kitchen faucet with pull-out spray
Finish: Chrome
Material: Chrome-plated brass
Cartridge: Ceramic disc
Hose Length: Standard length for kitchen use
Flow Rate: Water-saving aerator included
Mounting: Fits standard 1-3/8" or 1-1/2" sink holes
Warranty: Refer to IKEA warranty terms
Compliance: Meets applicable plumbing standards

Controls and Settings

Single lever controls both temperature and flow. Left movement for hot water, right for cold. Pull spray head from faucet for extended reach.

Spray Patterns: Press selector button on spray head to switch between: - Stream: Concentrated flow for filling containers - Spray: Wider pattern for rinsing and cleaning

Handle Operation: Lift handle to increase flow; move left/right to adjust temperature. Handle returns to center position when released.

Connecting to Water Supply

Requires standard hot and cold water connections. Includes flexible supply lines.

Shut off main water supply before connecting.
Connect hot water line to left valve (usually marked with red).
Connect cold water line to right valve (usually marked with blue).
Use thread seal tape on all connections to prevent leaks.
Hand-tighten connections, then use wrench for final quarter turn.

Tip: Ensure connections are secure but avoid overtightening which can damage threads.

Operation

Designed for intuitive daily use.

Turn on water: Lift handle upward; adjust temperature by moving left or right.
Use spray head: Pull spray head from faucet; it will extend on flexible hose.
Select spray pattern: Press button on spray head to switch between stream and spray.
Retract spray head: Gently guide spray head back toward faucet; it will retract automatically.
Turn off water: Push handle downward until it stops.
Adjust water temperature: Find comfortable position between hot and cold extremes.

WARNING! Do not pull spray head with excessive force. Guide retraction to prevent hose damage.

Maintenance

Regular cleaning preserves appearance and function.

Clean exterior: Use soft cloth with mild soap and water; dry immediately.
Clean aerator: Unscrew aerator monthly to remove mineral deposits.
Check for leaks: Periodically inspect connections under sink.
Lubricate moving parts: Use silicone-based lubricant on handle mechanism if needed.
Winterize if necessary: Drain faucet if exposed to freezing temperatures.

CAUTION! Do not use abrasive cleaners, steel wool, or harsh chemicals on chrome finish.

Regulatory Information

Complies with applicable plumbing codes and standards. Water-saving design meets efficiency requirements. Manufactured to IKEA quality standards. For warranty information, refer to IKEA warranty card included with purchase or visit IKEA website. Copyright © IKEA of Sweden AB. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Low water pressure	Clogged aerator	Remove and clean aerator; soak in vinegar if mineral deposits present.
Spray head doesn't retract	Hose kink or obstruction	Check hose path for kinks; ensure nothing is blocking retraction.
Leaking from handle	Worn cartridge	Replace ceramic disc cartridge following manufacturer instructions.
Water temperature inconsistent	Supply line issues	Check hot water heater; ensure both supply valves fully open.
Spray pattern not changing	Selector button stuck	Clean spray head; check for debris in selector mechanism.
Faucet loose on sink	Mounting nuts not tight	Tighten mounting nuts under sink; do not overtighten.

Note: For persistent issues, contact IKEA customer service or professional plumber.

Service: Visit IKEA store or website for replacement parts and support.