IKEA BROGRUND 903.426.26 Bath Shower instructions manual

The IKEA BROGRUND 903.426.26 is a bath shower set designed for easy installation and reliable use. It includes essential components for mounting a shower system in your bathroom, featuring a shower arm, showerhead, hose, and necessary fittings. Below are key sections for safety, features, installation, setup, operation, and maintenance.

Features at a Glance

Key components: Shower arm, showerhead, hose, wall bracket, and mounting hardware.

Installation

Unpack and inspect all components. Ensure you have the necessary tools.

1. Choose installation location: Select a suitable wall area near water supply.
2. Mark drill points: Use the wall bracket as a template to mark holes.
3. Drill holes: Use appropriate drill bit for your wall type.
4. Insert wall plugs: Secure plugs into drilled holes.
5. Mount shower arm: Attach shower arm to wall using provided screws.
6. Connect hose: Attach one end to shower arm and the other to water supply.
7. Attach showerhead: Screw showerhead onto the hose end.
8. Mount wall bracket: Secure bracket to wall for holding showerhead.

WARNING! Ensure water supply is turned off before installation. Use appropriate safety equipment when drilling.

First-Time Setup

After installation, prepare the shower for first use.

1. Check all connections: Ensure all fittings are tight and secure.
2. Turn on water supply: Slowly open water valve to check for leaks.
3. Test shower function: Run water to flush out any debris from new installation.
4. Adjust spray pattern: Use the showerhead dial to select preferred spray setting.
5. Secure showerhead in bracket: Place showerhead in wall bracket for storage.

CAUTION! Check for leaks at all connection points. Tighten fittings if necessary but avoid over-tightening.

Specifications

• Product Code: BROGRUND 903.426.26
• Type: Bath Shower Set
• Material: Chrome-plated brass
• Hose Length: Standard 1.5 meters
• Spray Patterns: Multiple settings including rain, massage, and mixed
• Water Pressure: Suitable for standard home water pressure (1-5 bar)
• Installation: Wall-mounted
• Warranty: Refer to IKEA warranty terms
• Compatibility: Standard 1/2" water connections

Controls and Settings

The shower features simple controls for operation and adjustment.

Showerhead Controls: Rotating dial for spray pattern selection. Wall Bracket: Adjustable angle for showerhead positioning. Water Flow: Controlled by existing bathroom mixer or valve.

Spray Patterns: RAIN (gentle wide spray), MASSAGE (concentrated pulsating spray), MIXED (combination of both). Angle Adjustment: Loosen bracket knob to adjust showerhead angle, then tighten to secure position.

Connecting to Water Supply

Connect to standard bathroom water supply using provided fittings.

1. Turn off main water supply before connecting.
2. Identify hot and cold water lines.
3. Connect shower hose to mixer valve or existing shower outlet.
4. Use thread seal tape on all connections to prevent leaks.
5. Hand-tighten all connections, then use wrench for final quarter turn.
6. Turn water back on and check for leaks.

Tip: If connecting to existing plumbing, ensure compatibility of thread sizes. Use adapters if necessary.

Using the Shower

Operating the shower is straightforward once installed.

1. Turn on water: Use existing bathroom controls to start water flow.
2. Select spray pattern: Rotate showerhead dial to desired setting.
3. Adjust temperature: Use bathroom mixer to achieve comfortable temperature.
4. Adjust angle: Position showerhead for optimal coverage.
5. After use: Return showerhead to wall bracket for storage.
6. Turn off water: Use bathroom controls to stop water flow.

WARNING! Test water temperature before entering shower to avoid scalding. Do not force dial adjustments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Weekly: Wipe chrome surfaces with soft, damp cloth to remove water spots.
2. Monthly: Remove showerhead and clean nozzles to prevent clogging.
3. As needed: Descale showerhead using vinegar solution for lime deposit removal.
4. Check connections: Periodically inspect for leaks and tighten if necessary.
5. Hose care: Avoid kinking or sharp bends in the hose during use and storage.

CAUTION! Do not use abrasive cleaners or scouring pads on chrome surfaces. Avoid harsh chemicals that may damage finishes.

Regulatory Information

This product complies with relevant EU standards for bathroom fittings. Manufactured to IKEA quality and safety standards. Contains brass components. For recycling information, contact local waste management authority. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Note: For persistent issues, contact IKEA customer service or a qualified plumber.

Service: Visit www.ikea.com or contact your local IKEA store for assistance.