IKEA BRIMNES 704.731.28 Drawer instructions manual

The IKEA BRIMNES 704.731.28 is a drawer unit designed for the BRIMNES bed frame series, featuring a sturdy construction, smooth-gliding drawers, and a clean, modern design. It is made from particleboard, fiberboard, and ABS plastic, with metal runners for durability. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Package Contents & Tools Required 2. Safety Information 3. Assembly Instructions 4. Installation to Bed Frame 5. Specifications 6. Drawer Operation & Features 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Package Contents & Tools Required

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity	Image Ref.
Drawer side panel (left)	1	A
Drawer side panel (right)	1	B
Drawer front panel	1	C
Drawer back panel	1	D
Drawer bottom panel	1	E
Metal runner assembly (pair)	1 set	F
Cam lock nuts & screws	1 pack	G
Plastic glides	4	H

Tools Required: Supplied Allen key. Optional: Phillips screwdriver, hammer.

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

Weight Limit: Do not exceed 33 lbs (15 kg) per drawer.
Stability: Ensure the bed frame is level and on a solid floor before attaching drawers.
Parts: Small parts are a choking hazard. Keep away from children under 3 years.
Assembly: Use on a soft, clean surface to avoid scratching panels.

WARNING! Do not stand or sit on the drawer. It is for storage only. Overloading can damage runners and structure.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Attach runners: Slide metal runner onto side panels (A & B) at pre-drilled holes. Secure with provided screws.
Connect front & back: Insert cam locks on front (C) and back (D) panels into side panels. Turn cam locks 90° clockwise to lock.
Install drawer bottom: Place panel (E) into grooves on all four sides. Tap gently with palm to seat fully.
Attach plastic glides: Press glides (H) into holes on bottom corners of drawer front.
Final check: Ensure all cam locks are tight, no gaps between panels, and drawer bottom is flush.

Tip: If parts do not align, check that all panels are oriented correctly (finished side out).

Installation to Bed Frame

Designed for BRIMNES bed frames with pre-installed drawer rails.

Ensure bed frame is assembled and in its final position.
Pull out the metal rail from the bed frame fully.
Align the drawer's metal runners with the bed frame rails.
Push the drawer firmly onto the rails until it clicks into place.
Test the drawer by pulling it out and pushing it in. It should glide smoothly.

CAUTION! Do not force the drawer. If it does not slide easily, remove it and check for obstructions or misalignment of the rails.

Specifications

Article Number: 704.731.28
Color: White
Material: Particleboard, Fiberboard, ABS plastic, Steel
Dimensions (W x H x D): 27 1/2" x 5 7/8" x 21 5/8" (70 cm x 15 cm x 55 cm)
Weight Capacity: 33 lbs (15 kg) max.
Runner Type: Side-mounted, ball-bearing metal runners.
Compatibility: BRIMNES bed frames with underbed storage.
Packaging Weight: Approx. 11 lbs (5 kg)

Drawer Operation & Features

Opening/Closing: Pull handle on front panel to open. Push gently to close. The runner has a soft-close feature to prevent slamming.

Full Extension: Runners allow the drawer to be pulled out completely for easy access to contents at the back.

Removal: To remove the drawer from the bed frame, pull it out to its full extension. Locate the plastic release tabs on both sides of the runner (inside the drawer). Press both tabs upward simultaneously and lift the drawer out.

Reinstallation: Align the drawer runners with the bed frame rails and push firmly until it clicks.

Care & Maintenance

Clean exterior with a damp cloth and mild detergent. Wipe dry immediately.

Runners: Keep runners free of dust and debris. Vacuum occasionally.
Surface: Do not use abrasive cleaners, scouring pads, or solvents.
Loading: Distribute weight evenly. Avoid placing sharp or heavy objects that could damage the bottom panel.

CAUTION! Do not expose to direct heat or moisture for prolonged periods, as this can warp the wood-based materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or is hard to open	Misaligned runners, overloaded, debris in track	Remove drawer, check alignment, clean runner tracks, reduce load.
Drawer wobbles	Loose cam locks, uneven floor	Tighten all cam locks inside drawer. Ensure bed frame is level.
Drawer will not close fully	Obstruction inside, item caught at back	Remove drawer and check for items blocking the path or the bed frame.
Runner detached from drawer	Screws loose	Reattach runner using provided screws and Allen key.
Drawer front is uneven	Front panel not installed correctly	Loosen cam locks, reposition front panel so it's flush, retighten.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details. Keep your receipt as proof of purchase.

Spare Parts: For missing or damaged parts, contact IKEA customer service with the article number (704.731.28).

Assembly Help: Visit the IKEA website for assembly videos or contact your local IKEA store.

Disposal: Dispose of packaging and product according to local recycling regulations.