IKEA BRIMNES 704.731.28 4 Drawer Chest instructions manual

The IKEA BRIMNES 704.731.28 is a 4-drawer chest made of particleboard, fiberboard, and ABS plastic, featuring a white finish, metal drawer runners, and a modern design suitable for bedroom storage. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Drawer Installation 5. Leveling & Stability 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Main frame panels, drawer fronts, drawer sides/bottoms, back panel, metal drawer runners, screws, cam locks, dowels.

Part DescriptionQuantityIdentification Code
Main frame side panel2100001
Main frame top/bottom panel2100002
Drawer front (white)4100003
Drawer side panel8100004
Drawer bottom panel4100005
Back panel (fiberboard)1100006
Metal drawer runner set4 pairs100007
Cam lock with screw8100008
Wooden dowel12100009
Assembly screw pack1 set100010

Safety Instructions

Read all instructions before assembly. Ensure a clean, spacious work area.

  1. Use provided tools only; do not overtighten screws.
  2. Assemble on a soft surface to avoid scratching parts.
  3. Keep small parts away from children during assembly.
  4. Check stability after assembly; secure to wall if included.

WARNING! Chest is heavy; use two people for lifting and moving. Ensure all connections are secure to prevent tipping.

Assembly Instructions

Follow steps in order. Estimated assembly time: 45-60 minutes.

  1. Lay side panels flat; insert dowels into pre-drilled holes.
  2. Attach top and bottom panels to side panels using cam locks.
  3. Secure back panel to frame with provided screws.
  4. Install drawer runner tracks on inner frame sides.
  5. Assemble drawer boxes: Connect sides to front/back, attach bottom panel.
  6. Attach drawer fronts to assembled drawer boxes.
  7. Insert drawers into frame, ensuring runners align.
  8. Check drawer operation; adjust if necessary.

CAUTION! Do not force parts; ensure cam locks are fully tightened.

Drawer Installation

Tip: If drawer sticks, check for obstructions and ensure runners are parallel.

Leveling & Stability

After assembly, place chest on level floor.

  1. Check for wobbling; adjust floor or use shims if uneven.
  2. If included, attach anti-tip bracket to wall and chest back.
  3. Do not overload drawers; maximum weight per drawer: 22 lbs (10 kg).

WARNING! To prevent tipping, secure chest to wall, especially in households with children.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals; avoid excessive moisture.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Drawer sticks or won't closeMisaligned runnersLoosen screws, realign runners, retighten.
Frame wobblesUneven floor or loose jointsCheck cam locks; tighten all connections; use shims.
Drawer front crookedMounting screws looseAdjust drawer front position; tighten screws from inside.
Missing partsPackaging errorContact IKEA support with product number.
Scratches on surfaceAssembly damageUse touch-up paint (available from IKEA).

Note: Do not modify parts; use only IKEA replacement components.

Warranty & Support

IKEA limited warranty applies; see warranty card for details. For missing parts or assembly help, visit IKEA store or www.ikea.com. Customer service: 1-888-888-4532.

Recycling: Dispose of packaging responsibly; recycle cardboard and plastic.

IKEA BRIMNES 704.731.28 4 Drawer Chest instructions manual © - All Rights Reserved 2025