IKEA BRIMNES 192.782.10 Cabinet instructions manual
The IKEA BRIMNES 192.782.10 is a versatile cabinet designed for storage in living rooms, bedrooms, or hallways. It features a clean, modern design, adjustable shelves, and a choice of finishes. Below are key sections for safety, parts list, assembly instructions, installation, care, and troubleshooting.
Parts & Hardware
Before assembly, verify all parts are present. Check packaging materials thoroughly.
| Part Description | Quantity | Image Ref. |
|---|
| Cabinet Side Panel (Left) | 1 | A |
| Cabinet Side Panel (Right) | 1 | B |
| Cabinet Top Panel | 1 | C |
| Cabinet Bottom Panel | 1 | D |
| Back Panel | 1 | E |
| Adjustable Shelves | 2 | F |
| Door Panel | 1 | G |
| Cam Lock Nuts | 8 | 1 |
| Screws | 20 | 2 |
| Wall Attachment Device | 1 set | 3 |
| Door Hinges | 2 | 4 |
| Shelf Supports | 8 | 5 |
| Allen Key | 1 | - |
NOTE: If any part is missing, contact IKEA customer service.
Safety Information
Read all instructions before assembly. For your safety and to prevent damage.
- Work Area: Assemble on a clean, soft surface (e.g., carpet) to avoid scratching parts.
- Lifting: Cabinet is heavy. Use two people for lifting and moving.
- Children: Keep children away from assembly area. Small parts are choking hazards.
- Tool Use: Use provided Allen key. Do not overtighten screws.
- Wall Attachment: CRITICAL: To prevent tipping, cabinet MUST be securely attached to the wall using the provided anti-tip device.
WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall.
Assembly Instructions
Follow steps in order. Do not fully tighten cam locks until all parts are joined.
- Prepare Panels: Lay side panels (A, B) flat. Insert cam locks into pre-drilled holes on inner sides.
- Attach Top & Bottom: Connect top panel (C) and bottom panel (D) to side panels using cam locks and screws. Hand-tighten only.
- Install Back Panel: Place cabinet face down on soft surface. Align back panel (E) and secure with provided screws.
- Add Shelf Supports: Insert shelf supports (5) into desired holes on side panels for adjustable shelf height.
- Install Shelves: Place adjustable shelves (F) onto the supports.
- Attach Door: Mount hinges (4) to door panel (G). Align door to cabinet front and attach hinges to side panel. Adjust door alignment as needed.
- Final Tightening: Once structure is square, fully tighten all cam locks and screws.
- Wall Attachment: See Section 4 for mandatory wall securing steps.
Tip: Ensure all cam locks are turned fully to the locked position (usually a 90° turn).
Installation & Placement
Proper placement ensures stability and longevity.
- Location: Place on a level, solid floor. Avoid damp areas (e.g., bathrooms).
- Wall Attachment (MANDATORY):
- Locate solid wall stud(s) using a stud finder.
- Position cabinet against wall in its final location.
- Attach the anti-tip bracket (3) to the wall stud(s) using suitable screws (not always provided).
- Secure the cabinet to the bracket using the provided screws through the top inner rear panel.
- Loading: Place heavier items on lower shelves. Do not exceed the total maximum load capacity.
- Door Adjustment: Use the Allen key on the hinges to adjust door height, depth, and closing tension if needed.
CAUTION! Never allow children to climb on or hang from doors, drawers, or shelves.
Care & Maintenance
Use proper cleaning methods to maintain appearance.
- Cleaning: Wipe with a damp, soft cloth. Dry immediately. For stubborn marks, use a mild soap solution.
- Avoid: Abrasive cleaners, scouring pads, solvents (e.g., acetone), or furniture polish containing silicone.
- Protection: Use coasters under glasses and vases to prevent water rings and heat damage.
- Inspection: Periodically check and retighten screws, hinges, and wall attachment.
CAUTION! Do not use excessive water. Moisture can damage particleboard and laminate surfaces.
Specifications
- Article Number: 192.782.10
- Product Name: BRIMNES Cabinet
- Dimensions (W x H x D): Approx. 70cm x 120cm x 40cm (27 1/2" x 47 1/4" x 15 3/4")
- Weight: Approx. 25 kg (55 lbs)
- Max. Shelf Load: 15 kg (33 lbs) per shelf
- Material: Particleboard, Fiberboard, Plastic edging, Steel hardware
- Finish: White stained oak effect / White (Model specific)
- Required Tools: Allen key (included), Phillips screwdriver (for wall attachment), Stud finder (recommended).
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Cabinet wobbles or feels unstable | Floor not level; Assembly not square; Wall not attached | Check floor; Re-tighten all joints from step 1; Ensure wall bracket is securely fixed to stud and cabinet. |
| Door does not close evenly or drags | Hinges need adjustment; Cabinet not level | Use Allen key to adjust hinge screws (in/out, up/down). Check cabinet level front-to-back and side-to-side. |
| Cam lock does not tighten or feels loose | Cam post not aligned with lock; Stripped thread | Disassemble step, ensure cam post inserts fully into lock. Do not cross-thread. If part is damaged, request replacement. |
| Shelf sags or does not sit flat | Overloaded; Shelf supports not fully inserted | Reduce weight below max load. Ensure all four shelf supports are clicked fully into holes. |
| Scratches on surface during assembly | Assembled on hard floor | Always assemble on a soft, protective surface like the cardboard packaging or a blanket. |
Warranty & Support
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty leaflet included in the packaging for full terms and conditions.
IKEA Customer Support:
Website: www.ikea.com
Phone: 1-888-888-4532 (IKEA-USA)
For spare parts: Use the article number (192.782.10) when contacting support.
Recycling: At end of life, disassemble and recycle materials according to local regulations. Particleboard can often be recycled as wood waste.
IKEA BRIMNES 192.782.10 Cabinet instructions manual © - All Rights Reserved 2025