IKEA BRIMNES 003.006.64 Cabinet instructions manual

The IKEA BRIMNES 003.006.64 is a versatile cabinet designed for bedroom or living room storage, featuring a clean white finish, adjustable shelves, and a hinged door. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts identification, assembly instructions, installation, care, and troubleshooting.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Installation & Placement 5. Adjustments & Features 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Key components: Cabinet frame, door, shelves, hinges, screws, cam locks, dowels, and wall attachment device.

Part NameQuantityDescription
Cabinet side panel2Left and right side panels with pre-drilled holes
Top panel1Cabinet top with pre-drilled holes
Bottom panel1Cabinet base with pre-drilled holes
Back panel1Fiberboard back panel
Door1Hinged door with handle
Adjustable shelf2Interior shelves with adjustable height
Hinge4Concealed hinges for door attachment
Cam lock with screw8For panel connection
Dowel12Wooden pegs for alignment
Wall attachment device1Anti-tip bracket for safety

Safety Information

Read all instructions before assembly. Ensure safe handling and installation.

  1. Assembly: Requires two people. Use on stable, level surface.
  2. Wall attachment: MUST secure cabinet to wall using provided bracket to prevent tipping.
  3. Weight capacity: Do not exceed 55 lbs (25 kg) total distributed weight on shelves.
  4. Tools needed: Phillips screwdriver, hammer (optional for dowels).

WARNING! Failure to secure cabinet to wall can result in serious injury or death from tipping. Keep small parts away from children during assembly.

Assembly Instructions

Follow steps in order. Check all parts before starting.

  1. Lay side panels flat. Insert dowels into pre-drilled holes on inner sides.
  2. Attach top and bottom panels to side panels using cam locks. Tighten with screwdriver.
  3. Slide back panel into grooves on rear of cabinet. Secure with provided nails or screws.
  4. Attach hinges to door using screws. Then mount hinges to cabinet side panel.
  5. Insert adjustable shelves onto shelf supports at desired height.
  6. Attach wall bracket to cabinet back and secure to wall stud.

CAUTION! Do not overtighten screws. Ensure all cam locks are fully engaged and flush.

Installation & Placement

Adjustments & Features

Door adjustment: Loosen hinge screws to align door; tighten when level. Shelf height: Move shelf supports to desired holes (4 positions).

Features: Adjustable shelves for flexible storage, concealed hinges for clean look, pre-drilled holes for easy assembly, wall anchor for safety.

Care & Maintenance

Clean with damp cloth; dry immediately. Do not use abrasive cleaners.

  1. Surface: Wipe with mild soap solution; avoid solvents.
  2. Hardware: Tighten screws/hinges periodically if loose.
  3. Shelves: Remove items before adjusting to prevent damage.

Tip: Check wall attachment annually for security.

Troubleshooting

SymptomPossible CauseCorrective Action
Door not closing properlyHinge misalignmentLoosen hinge screws, adjust door position, retighten.
Cabinet wobblesUneven floor/wall not attachedLevel floor with shims; ensure wall bracket is secured to stud.
Shelf does not stay in placeShelf support not fully engagedRemove shelf, ensure support pins are fully inserted into holes.
Cam lock not tighteningCam not turned fullyUse screwdriver to turn cam 90° until flush with panel.
Scratches on surfaceAssembly damageUse touch-up paint (available from IKEA); handle panels with care.

Replacement parts: Contact IKEA for missing or damaged components.

Warranty & Support

IKEA limited warranty: 10 years for structural frame, 1 year for moving parts. Proof of purchase required. For assistance, visit www.ikea.com or contact IKEA customer service at 1-800-434-4532.

IKEA BRIMNES 003.006.64 Cabinet instructions manual © - All Rights Reserved 2025