IKEA BOVIGGEN 905.105.68 Sink instructions manual

The IKEA BOVIGGEN 905.105.68 is a stainless steel kitchen sink designed for durability and easy cleaning. It features a single bowl design, sound-absorbing undercoating, a standard drain hole location, and compatibility with most faucets and accessories. Below are key sections for safety, features, installation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel bowl, sound-absorbing undercoating, pre-cut drain hole, mounting clips, template for countertop cutout.

Feature	Description
Material	18/10 stainless steel for durability and corrosion resistance
Sound-absorbing undercoating	Reduces noise from water and dishes
Bowl dimensions	Single bowl design for versatile use
Drain hole	Standard size for most drain assemblies
Mounting method	Top-mount (drop-in) installation with included clips
Compatibility	Fits most standard countertops and faucets
Weight capacity	Designed for normal kitchen use
Finish	Brushed satin finish for easy cleaning
Included accessories	Mounting clips, template, installation guide
Warranty	Limited warranty as per IKEA terms

Installation

Unpack and inspect contents. Ensure countertop is prepared.

Prepare countertop: Use provided template to mark cutout area on countertop.
Cut countertop: Carefully cut along marked lines using appropriate tools.
Position sink: Place sink into the cutout, ensuring it sits evenly.
Secure sink: Attach mounting clips underneath countertop edge, tightening evenly.
Connect plumbing: Install drain assembly and faucet according to manufacturer instructions.
Seal edges: Apply silicone sealant between sink rim and countertop if required.

WARNING! Use proper safety equipment when cutting countertop. Ensure sink is securely mounted before use.

First-Time Setup

After installation, perform initial checks.

Check for leaks: Turn on water supply and check all connections.
Test drain: Fill sink with water, then drain to ensure proper flow.
Verify stability: Apply light pressure to ensure sink doesn't shift.
Clean surface: Wipe sink with mild soap and water before first use.

CAUTION! Allow sealant to cure fully (if used) before exposing to water.

Specifications

Model: BOVIGGEN 905.105.68
Material: 18/10 stainless steel
Bowl Type: Single bowl
Installation Type: Top-mount (drop-in)
Overall Dimensions: [Dimensions to be specified based on product]
Bowl Depth: Standard kitchen sink depth
Drain Hole Size: Standard 3.5 inches
Weight: [Weight to be specified based on product]
Finish: Brushed satin
Sound Dampening: Yes, undercoating applied

Controls and Settings

This sink does not have electronic controls. Settings refer to proper installation adjustments.

Mounting Clips: Adjust tightness to ensure secure fit without damaging countertop.

Leveling: Ensure sink is level during installation to prevent water pooling.

Sealant Application: Apply even bead of silicone sealant if recommended for your countertop material.

Connecting Devices

Connect standard kitchen plumbing components.

Drain assembly: Connect to pre-cut drain hole using provided or purchased components.
Faucet: Install through pre-drilled holes or countertop according to faucet instructions.
Water supply lines: Connect hot and cold water lines to faucet.
Optional accessories: Install soap dispenser, water filter, etc., if compatible.

Tip: Use thread seal tape on all threaded connections to prevent leaks.

Playing DVD Media

This section is not applicable to a kitchen sink. Please refer to the appropriate manual for electronic devices.

Accessibility Features

This sink features standard height and depth suitable for most users. For specific accessibility needs, consult with a kitchen design specialist.

Care & Cleaning

Regular cleaning maintains appearance and longevity.

Daily cleaning: Use mild dish soap, warm water, and soft cloth or sponge.
Stain removal: For water spots or light stains, use vinegar solution or stainless steel cleaner.
Avoid abrasives: Do not use steel wool, abrasive pads, or harsh chemicals.
Rinse thoroughly: After cleaning, rinse with clean water and dry with soft cloth.
Prevent scratches: Use sink grids or mats to protect surface from heavy pots.

CAUTION! Never use chlorine bleach or oven cleaners. Always follow grain direction when cleaning brushed finish.

Regulatory Information

This product complies with applicable safety and material standards. Stainless steel meets food contact safety requirements. For warranty information, refer to IKEA terms and conditions. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Sink not draining	Clogged drain	Use plunger or drain cleaner; check P-trap for debris.
Water leaking underneath	Loose connections or damaged seal	Tighten drain connections; reapply sealant if needed.
Sink moving or loose	Mounting clips not tight	Tighten mounting clips evenly; check countertop support.
Scratches on surface	Abrasive cleaning	Avoid abrasive materials; use stainless steel polish for light scratches.
Water spots or stains	Hard water or mineral deposits	Clean with vinegar solution; dry after each use to prevent spots.
Noise when water runs	Missing or damaged undercoating	Contact IKEA support if undercoating is peeling or missing.

Service: For installation or product issues, contact IKEA customer service or visit www.ikea.com