IKEA BONDHOLMEN 404.690.24 Bar Table instructions manual

The IKEA BONDHOLMEN 404.690.24 is a versatile outdoor bar table designed for patios, balconies, and gardens. Constructed from powder-coated steel and acacia wood, it features a weather-resistant finish, adjustable feet for stability on uneven surfaces, and a compact design ideal for small spaces. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Adjusting & Leveling 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are included. Check packaging for small hardware bags.

Part DescriptionQuantityImage Ref.
Tabletop (Acacia wood)1A
Leg Frame (Powder-coated steel)1B
Adjustable Feet4C
Hex Key (Allen wrench) 5mm1D
Wood Screws8E
Protective Caps4F

Note: Keep hardware away from children to avoid choking hazards.

Safety Instructions

Read all instructions before assembly. Use on stable, level ground.

  1. Assembly Surface: Assemble on a soft, clean surface to avoid scratches.
  2. Tool Use: Use only provided hex key; power tools may damage parts.
  3. Weight Limit: Maximum load: 50 kg (110 lbs). Do not stand or sit on table.
  4. Outdoor Use: Designed for outdoor use but store indoors during extreme weather.

WARNING! Table is heavy; lift with care. Two people recommended for assembly.

Assembly Steps

Estimated assembly time: 30 minutes. Follow steps in order.

  1. Attach Legs: Place leg frame (B) upside down on soft surface. Insert adjustable feet (C) into each leg tube and hand-tighten.
  2. Attach Tabletop: Position tabletop (A) upside down on a padded surface. Align leg frame (B) with pre-drilled holes on underside of tabletop.
  3. Secure Frame: Using hex key (D), insert wood screws (E) through frame into tabletop. Tighten all 8 screws firmly but do not overtighten.
  4. Flip Table: Carefully turn table right-side up with assistance.
  5. Install Caps: Press protective caps (F) onto ends of adjustable feet.

Tip: Ensure all screws are tight before use to prevent wobbling.

Adjusting & Leveling

Adjustable feet allow stability on uneven surfaces like patios or decks.

  1. Place table in desired location.
  2. If table wobbles, rotate individual feet clockwise to lower or counterclockwise to raise.
  3. Check stability by gently rocking table; adjust until stable.

Note: Do not extend feet more than 2 cm (0.8 inches) from leg tube.

Care & Maintenance

Proper care extends product life. Clean regularly.

CAUTION! Do not use pressure washers, bleach, or harsh chemicals.

Specifications

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven surface; feet not adjustedAdjust individual feet until stable; ensure all screws are tight.
Wood discolorationWeather exposureClean and apply teak oil; store indoors during harsh weather.
Rust on frameFinish damagedClean area with fine steel wool; touch up with matching paint.
Screws looseNot tightened fullyTighten with hex key; check periodically.
Difficulty assemblingParts misalignedDisassemble and restart, ensuring holes align before screwing.

Warranty & Support

IKEA limited warranty applies. See warranty card for details.

Support: For missing parts or assembly help, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com. Provide model number (404.690.24) and date of purchase.

Recycling: Dispose of packaging responsibly. Recycle cardboard and plastic per local regulations.

IKEA BONDHOLMEN 404.690.24 Bar Table instructions manual © - All Rights Reserved 2025