IKEA BONDHOLMEN 193.237.45 Loveseat instructions manual

The IKEA BONDHOLMEN 193.237.45 is a two-seater rattan loveseat designed for outdoor use. It features a sturdy powder-coated steel frame, weather-resistant synthetic rattan weave, removable and washable cushion covers (fabric: Runnen gray), and requires user assembly. Below are key sections for safety, parts list, assembly instructions, care, warranty, and troubleshooting.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Warranty Information 6. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part NumberDescriptionQuantity
100001Main Frame (Left Side)1
100002Main Frame (Right Side)1
100003Seat/Back Rattan Panel1
100004Armrest (Left)1
100005Armrest (Right)1
200001Bolts M8 x 40mm8
200002Washers8
200003Allen Key (4mm)1
300001Seat Cushion (Runnen gray)1
300002Back Cushion (Runnen gray)1

Safety Information

Read all instructions before assembly and use.

  1. Assembly requires two adults.
  2. Assemble on a soft, clean surface to avoid scratching parts.
  3. Ensure all bolts are tightened securely to prevent instability.
  4. Maximum load capacity: 485 lbs (220 kg) evenly distributed.
  5. For outdoor use only. Store cushions indoors during extreme weather.

WARNING! Do not stand on the loveseat. Keep away from open flames. Check tightness of bolts periodically.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Tools provided: Allen key.

  1. Step 1: Place the left and right main frame sections (100001, 100002) on the floor with the pre-drilled holes facing inward.
  2. Step 2: Align the seat/back rattan panel (100003) between the frame sections.
  3. Step 3: Insert bolts (200001) through the frame into the rattan panel. Secure with washers (200002). Tighten using the Allen key (200003). Do not overtighten.
  4. Step 4: Attach the left and right armrests (100004, 100005) to the main frame using the remaining bolts and washers. Ensure they are level.
  5. Step 5: Double-check all connections for stability.
  6. Step 6: Place the seat cushion (300001) and back cushion (300002) onto the frame.

Tip: If parts do not align easily, do not force them. Check orientation and try again.

Care & Maintenance

CAUTION! Do not use abrasive cleaners, pressure washers, or solvents on the rattan or frame.

Warranty Information

IKEA Limited Warranty: 10 years for the frame and rattan weave under normal residential outdoor use. 2 years for cushions. Warranty covers defects in materials and workmanship. Proof of purchase required.

Exclusions: Damage from improper assembly, misuse, accidents, lack of maintenance, or commercial use. Fading of fabric due to sunlight is not considered a defect.

For warranty claims, contact your local IKEA store or visit www.ikea.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Loveseat wobbles or feels unstableBolts not tightened; uneven floorCheck and tighten all bolts. Place on a level surface.
Rattan weave feels loose or has gapsNormal settling; extreme temperature changesLightly mist with water to allow natural contraction. If gap is large, contact IKEA.
Cushion covers shrink after washingWashed at too high temperature; tumble dried on high heatFollow care label: wash at 40°C, dry low. Reattach while damp to stretch.
Rust spots on framePowder coat scratched; exposed to salt airSand area lightly, clean, and apply touch-up paint. Keep covered when not in use.
Difficulty attaching armrestsHoles misaligned; part orientation wrongLoosen main frame bolts slightly to adjust alignment. Re-tighten after armrests are attached.

Need Help? Visit the IKEA website for assembly videos or contact customer service at 1-888-888-4532.

IKEA BONDHOLMEN 193.237.45 Loveseat instructions manual © - All Rights Reserved 2025