IKEA BODBYN 602.210.65 Deco Strip instructions manual

The IKEA BODBYN 602.210.65 Deco Strip is a decorative LED lighting strip designed for ambient illumination, featuring adhesive backing for easy mounting, low-voltage operation, and a flexible design suitable for various indoor applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Flexible LED strip, Power adapter, Remote control (if included), Adhesive backing, Connection cables.

Feature	Description
LED Strip	Flexible, low-energy LED lighting for decorative purposes
Power Adapter	Converts AC to low-voltage DC for safe operation
Adhesive Backing	Pre-applied tape for easy mounting on clean surfaces
Remote Control	For adjusting brightness and color modes (if applicable)
Connection Ports	For linking multiple strips or extending length
Cut Marks	Indicates where strip can be safely cut to length
Water Resistance	IP rating suitable for indoor use (check specific model)
Color Options	Single color or RGB adjustable (model dependent)
Dimmable	Brightness adjustable via remote or controller
Low Voltage	Safe for home use, typically 12V or 24V DC

Installation

Unpack and inspect contents. Ensure surface is clean and dry.

Plan layout: Determine where to place strip, considering power source location.
Prepare surface: Clean with isopropyl alcohol, ensure it's dry and dust-free.
Mount strip: Peel adhesive backing, press firmly along desired path.
Connect power: Plug adapter into outlet, connect to strip's input port.
Test operation: Turn on to verify lighting before finalizing installation.

WARNING! Do not install near heat sources or in damp areas unless rated for it. Ensure proper ventilation for power adapter.

First-Time Setup

Power on Deco Strip; configure as needed.

Connect power: Plug adapter into wall outlet, connect to strip.
Remote pairing: Point remote at IR receiver, press power button (if applicable).
Adjust settings: Use remote to set color, brightness, and dynamic modes.
Secure connections: Ensure all cables are neatly arranged and secured.

CAUTION! Do not bend strip sharply (minimum bend radius as specified). Avoid covering strip with insulating materials.

Specifications

Model: BODBYN 602.210.65 Deco Strip
Power Supply: Input: 100-240V AC, 50/60Hz; Output: 12V/24V DC (check label)
LED Type: SMD LEDs, energy-efficient
Length: Standard strip length (e.g., 2m/5m)
Color Temperature: Warm white/Cool white or RGB (model dependent)
Brightness: Adjustable, measured in lumens per meter
Beam Angle: Wide angle for even illumination
Lifespan: Up to 30,000 hours (typical)
Operating Temp: 0°C to 40°C (32°F to 104°F)
Protection Rating: IP20 for indoor dry locations (may vary)

Controls and Settings

Control via included remote or power switch. Remote Functions: ON/OFF, Mode, Brightness +/-, Color selection, Speed adjustment (for dynamic effects).

Settings Overview: Static Color: Choose from preset colors. Dynamic Modes: Flash, Strobe, Fade, Smooth. Brightness: Adjust from 0% to 100%. Memory Function: Remembers last setting when powered on.

Connecting Devices

Extensions: Use connectors to join multiple strips. Controller: Connect between power supply and strip for advanced control.

Turn off power before making connections.
Align polarity (+/-) when connecting strips or accessories.
Use soldering or clip connectors for secure joints (if cutting and extending).
Do not exceed maximum run length per power supply (check manual).

Tip: Use cable ties or clips to manage wires for a clean installation.

Operation

Daily use and mode selection.

Power: Switch on via remote or main power.
Select mode: Cycle through static colors or dynamic effects.
Adjust brightness: Use +/- buttons to set desired light level.
Timer function: If available, set auto on/off times.
Sync with music: Some models have sound-activated mode.

WARNING! Do not operate in enclosed fixtures unless rated for it. Avoid touching LEDs directly when powered to prevent static damage.

Safety Features

Overload Protection: Built-in circuit protection against short circuits. Thermal Management: Auto-dim or shut-off if overheating detected. Low Voltage: Safe for touch during operation.

Care & Cleaning

Turn off and unplug before cleaning. Use dry, soft cloth to wipe strip. For stubborn dirt, dampen cloth slightly with water, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or immerse in water. Ensure strip is completely dry before powering on.

Regulatory Information

CE marked: Complies with European safety standards. RoHS compliant: Free of hazardous substances. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle according to local regulations. For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Strip does not light up	Power connection	Check power adapter is plugged in; verify connections are secure.
Partial lighting	Cut point or connection	Ensure cut was made at marked points; check solder joints or connectors.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure line of sight to IR receiver.
Flickering lights	Loose connection or voltage drop	Check all connections; ensure power supply matches strip voltage.
Adhesive failing	Surface preparation	Re-clean surface with alcohol; use additional mounting clips if needed.
Overheating	Poor ventilation or overload	Ensure adequate airflow; do not cover strip or power adapter.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: Contact IKEA customer service or visit www.ikea.com for assistance.