IKEA BOCKÖN 104.951.33 Hammock Stand Instructions Manual

The IKEA BOCKÖN 104.951.33 is a freestanding hammock stand designed for indoor and sheltered outdoor use. It is constructed from powder-coated steel for durability and weather resistance, supports a maximum load of 120 kg (265 lbs), and is compatible with most IKEA hammocks. The stand requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly, use, care, and warranty information.

1. Safety Information & Warnings 2. Parts & Hardware List 3. Assembly Instructions 4. Specifications 5. Hanging Your Hammock 6. Usage Guidelines 7. Care & Maintenance 8. Disassembly & Storage 9. Troubleshooting 10. Warranty & Support

Safety Information & Warnings

Read all instructions before assembly and use. Failure to follow warnings can result in serious injury or damage.

Warning	Description
Maximum Load	Do not exceed 120 kg (265 lbs) total weight. Includes person(s) and any additional items.
Assembly Surface	Assemble on a soft, clean surface to avoid scratching parts.
Stability	Ensure all locking mechanisms are fully engaged before use. Use only on firm, level ground.
Supervision	Children should not use unsupervised. Do not allow jumping or swinging excessively.
Weather	For outdoor use, position in a sheltered area. Do not leave exposed to prolonged heavy rain or extreme conditions.
Inspection	Regularly check all connections, bolts, and the hammock attachment points for wear or damage.

Parts & Hardware List

Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.

Main Frame Sections: Curved end pieces (2), Long side tubes (2).
Crossbars & Supports: Central crossbar (1), Short stabilizing bars (2).
Hardware Bag Contents: Large bolts (8), Nuts (8), Washers (16), Allen key (1).
Hammock Hooks: S-hooks or carabiners (2) attached to the stand ends.

IMPORTANT! Keep small parts away from children during assembly.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Requires two people for easier handling.

Prepare Area: Lay out all parts on a clean, soft surface (e.g., carpet or blanket).
Connect End Frames: Attach the two curved end pieces to the long side tubes using bolts, washers, and nuts. Hand-tighten initially.
Install Crossbar: Fit the central crossbar between the side tubes at the designated points. Secure with provided hardware.
Add Stabilizers: Attach the short stabilizing bars near the base for added rigidity.
Final Tightening: Once fully assembled, use the Allen key to firmly tighten all bolts. Ensure no parts are loose.
Check Stability: Gently rock the stand. It should not wobble or have any play at the joints.

CAUTION! Do not overtighten bolts, as this may strip the threads. Assemble in the intended use location if possible, as the stand is bulky when complete.

Specifications

Article Number: 104.951.33
Product Name: BOCKÖN
Type: Hammock Stand
Material: Steel, Powder coating
Max Load: 120 kg (265 lbs)
Approx. Dimensions (Assembled): Length: 300 cm (118"), Width: 120 cm (47"), Height: 110 cm (43")
Weight: Approx. 15 kg (33 lbs)
Color: Black
Intended Use: Indoor and sheltered outdoor (e.g., patio, balcony, under roof)
Hammock Compatibility: Designed for IKEA hammocks (sold separately). May fit other hammocks with similar attachment loops and length.

Hanging Your Hammock

Once the stand is assembled and stable, attach your hammock.

Position Stand: Place the stand where you intend to use it, ensuring it is level.
Attach Hammock: Hook the ends of your hammock onto the S-hooks or carabiners at each end of the stand.
Adjust Sag: The hammock should have a natural, comfortable curve (sag). It should not be pulled taut like a tightrope. Adjust attachment points if possible.
Test Weight: Before full use, apply gentle pressure to ensure the hammock is securely attached and the stand is stable.

Tip: The ideal sitting/laying height allows your feet to touch the ground easily when seated at the edge.

Usage Guidelines

For safe and prolonged enjoyment of your hammock stand.

Always sit down and get up slowly. Avoid sudden or jerky movements.
Use alone or with another person only if the total weight is under the 120 kg limit.
Do not stand, jump, or use the hammock as a swing.
For outdoor use, avoid placing on wet grass or muddy ground to prevent sinking or instability.
In windy conditions, secure or store the hammock and stand to prevent tipping.

Care & Maintenance

Proper care will extend the life of your product.

Cleaning: Wipe the steel frame with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners or solvents.
Rust Prevention: If used outdoors, occasionally check for chips in the powder coating. Touch up with matching paint if necessary to prevent rust.
Hardware Check: Periodically (every few months), check and re-tighten all bolts and connections, as they may loosen over time.
Hammock Care: Follow the care instructions for your specific hammock fabric.

CAUTION! Never use a pressure washer or hose to clean the stand, as water can force its way into joints and cause corrosion.

Disassembly & Storage

To save space or move the stand.

Remove the hammock.
Using the Allen key, loosen and remove all bolts, washers, and nuts.
Carefully separate the frame pieces.
Store all parts in a dry place. Keep the hardware in a sealed bag taped to one of the frame pieces.
Reassembly is the reverse of the assembly process.

Note: Labeling parts with tape during disassembly can make reassembly easier.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Stand wobbles or feels unstable	Bolts not fully tightened; ground not level; stabilizers not installed.	Check and tighten all connections. Move to a level surface. Ensure both stabilizing bars are attached.
Hammock touches the ground	Hammock is too long for stand; attachment too loose.	Use a shorter hammock or adjust attachment to create more tension (without making it taut).
Rust spots appearing	Powder coating damaged; prolonged exposure to moisture.	Lightly sand rust spot and apply touch-up paint. Store indoors when not in use for long periods.
Squeaking noises during use	Metal parts rubbing; bolts need lubrication.	Apply a small amount of silicone-based lubricant to bolt threads and connection points.
Hammock hooks feel loose	Hooks may have bent under load; wear and tear.	Stop using immediately. Contact IKEA for replacement hooks. Do not attempt to repair bent metal.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on www.ikea.com.

For missing parts or assembly support: Visit your local IKEA store or contact IKEA customer service.

Online Resources: Assembly instructions and video guides may be available on the IKEA website under the product page for BOCKÖN (104.951.33).

Safety Notices: IKEA reserves the right to change product specifications for improvement. Always refer to the latest documentation.