IKEA BOAXEL 494.406.20 Leg instructions manual
The IKEA BOAXEL 494.406.20 Leg is a component of the BOAXEL shelving system, designed for secure mounting and height adjustment. This manual provides essential information for safe assembly, installation, adjustment, and maintenance of the leg component. Below are key sections covering safety, features, installation, adjustment, care, and troubleshooting.
Features at a Glance
Key components: Adjustable leg with mounting brackets, leveling feet, and hardware.
| Feature | Description |
|---|
| Material | Steel with powder-coated finish |
| Adjustment Range | Height adjustable from 4" to 6" (10-15 cm) |
| Mounting Type | Wall-mounted or freestanding (with additional components) |
| Leveling Feet | Integrated for stability on uneven floors |
| Compatibility | Designed for BOAXEL shelving system components |
| Color | White (as per product code) |
| Hardware Included | Mounting screws, wall anchors, adjustment tools |
| Load Capacity | Up to 50 lbs (22.7 kg) per leg when properly installed |
| Installation | Tool-assisted assembly required |
| Safety Features | Non-slip feet, secure locking mechanism |
Parts Included
Unpack and verify all components before installation.
- Adjustable Leg (1 piece)
- Mounting Bracket (1 piece)
- Leveling Foot (1 piece)
- Mounting Screws (4 pieces)
- Wall Anchors (4 pieces)
- Adjustment Key (1 piece)
- Instruction Manual (this document)
WARNING! Do not proceed if any parts are missing or damaged. Contact IKEA customer service for replacements.
Tools Required
Gather these tools before beginning installation:
- Phillips Screwdriver
- Drill (for wall mounting)
- Level
- Measuring Tape
- Pencil
- Hammer (for wall anchors)
CAUTION! Use appropriate safety gear (safety glasses) when drilling.
Installation Steps
- Preparation: Clear installation area. Identify wall studs if wall-mounting.
- Mark Positions: Use level and pencil to mark mounting hole locations according to BOAXEL system layout.
- Drill Holes: Drill pilot holes at marked locations. Insert wall anchors if not mounting into studs.
- Attach Bracket: Secure mounting bracket to wall using provided screws. Ensure bracket is level.
- Install Leg: Slide leg into bracket until it clicks into place. Verify secure attachment.
- Attach Leveling Foot: Screw leveling foot into bottom of leg. Do not overtighten.
- Final Check: Ensure all connections are tight and leg is stable.
WARNING! Ensure wall can support intended load. Use appropriate anchors for wall type.
Height Adjustment
Adjust leg height before loading with weight.
- Locate adjustment mechanism on leg shaft.
- Insert adjustment key into designated hole.
- Turn key counterclockwise to loosen locking mechanism.
- Slide leg to desired height (within marked range).
- Turn key clockwise to lock leg in position.
- Remove adjustment key.
- Repeat for all legs in system to ensure level installation.
Tip: Adjust all legs to same height for level shelving.
Weight Capacity
- Maximum Load per Leg: 50 lbs (22.7 kg)
- Total System Capacity: Dependent on number of legs and shelf configuration
- Dynamic Load: Reduce capacity by 20% for frequently accessed shelves
- Weight Distribution: Distribute weight evenly across all legs
- Center of Gravity: Keep heavier items on lower shelves
CAUTION! Do not exceed weight limits. Overloading can cause instability or failure.
Safety Precautions
Follow these precautions for safe use:
- Install on solid, level surfaces only.
- Secure to wall if shelf height exceeds 24 inches (61 cm).
- Do not climb on or hang from shelves.
- Keep away from heat sources and moisture.
- Regularly check tightness of all connections.
- Do not modify or alter leg components.
- Keep adjustment key in safe place for future adjustments.
WARNING! Failure to follow safety instructions may result in injury or property damage.
Care & Maintenance
Clean with dry, soft cloth only. Do not use abrasive cleaners or chemicals.
- Monthly: Check all connections for tightness
- Quarterly: Inspect for signs of wear or damage
- As Needed: Adjust leveling feet if furniture becomes unsteady
- Cleaning: Wipe with damp cloth, then dry immediately
CAUTION! Do not use water or liquid cleaners on adjustment mechanisms.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Leg wobbles | Loose connections | Tighten all screws and locking mechanism |
| Uneven height | Improper adjustment | Re-adjust all legs using level |
| Difficulty adjusting | Debris in mechanism | Clean adjustment area; do not force |
| Leg won't lock | Worn locking mechanism | Contact IKEA for replacement part |
| Scratches on floor | Dirty leveling feet | Clean feet; add felt pads if necessary |
| Sagging shelf | Overloaded | Reduce weight; check weight distribution |
Warranty & Support
IKEA limited warranty applies. See IKEA terms and conditions for details.
- Warranty Period: As per local IKEA policy
- Support Contact: Visit IKEA store or www.ikea.com
- Spare Parts: Available through IKEA customer service
- Recycling: Dispose of properly according to local regulations
- Safety Standards: Complies with applicable furniture safety standards
Note: Keep receipt for warranty claims. Product code: 494.406.20
IKEA BOAXEL 494.406.20 Leg instructions manual © - All Rights Reserved 2025