IKEA BOAXEL 304.495.88 Wire Shelf instructions manual

The IKEA BOAXEL 304.495.88 is a versatile, wall-mounted wire shelf system designed for storage in various rooms. It features adjustable components, a sturdy steel frame with epoxy/polyester powder coating, and a white finish. The system includes wall brackets, wire shelves, hooks, and connecting hardware for customizable configurations. Below are key sections for safety, parts list, tools needed, assembly instructions, installation, usage tips, care, and warranty information.

1. Parts & Components List 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Installation 6. Configuration Options 7. Weight Limits & Usage 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Parts & Components List

Verify all parts are included before starting assembly. Key components: Vertical uprights, horizontal brackets, wire shelves, shelf supports, wall anchors, screws, hooks, and connectors.

Part Number	Description	Quantity
1001	Vertical Upright (80 cm)	2
1002	Horizontal Wall Bracket (60 cm)	2
1003	Wire Shelf (55x30 cm)	3
1004	Shelf Support Clip	12
1005	Wall Anchor (for solid walls)	8
1006	Screw (4x30 mm)	8
1007	Hook (for hanging items)	6
1008	Connector for uprights	1
1009	End Cap	4
1010	Instruction Manual	1

Tools Required

Gather these tools before beginning assembly and installation.

Phillips screwdriver (or cordless drill with screwdriver bit).
Pencil for marking wall.
Spirit level (minimum 60 cm).
Tape measure.
Hammer (for wall anchors).
Electric drill with appropriate drill bit for your wall type.
Safety glasses (recommended).

NOTE: Using the correct tools ensures proper installation and safety.

Safety Instructions

Read all instructions before assembly. Follow safety guidelines to prevent injury or damage.

Wall suitability: Install only on solid walls (concrete, brick, solid wood). Do not mount on plasterboard/drywall alone without proper reinforcement.
Weight limit: Do not exceed max load of 15 kg per shelf. Total system max load: 45 kg.
Child safety: Do not allow children to climb or hang on shelves.
Secure mounting: Ensure all screws and anchors are tight. Check stability periodically.
Proper handling: Use care when handling metal parts to avoid sharp edges.

WARNING! Failure to follow these instructions may result in the shelf collapsing, causing injury or property damage.

Assembly Steps

Assemble components before mounting to wall. Work on a clean, flat surface.

Attach uprights to brackets: Insert vertical upright (1001) into horizontal wall bracket (1002). Secure with provided screws (1006) using a screwdriver.
Connect uprights (if applicable): For taller configurations, connect two uprights using connector (1008). Ensure they are aligned straight.
Attach shelf supports: Slide shelf support clips (1004) onto uprights at desired heights. Each shelf requires 4 clips (2 per upright).
Place wire shelves: Position wire shelf (1003) onto the 4 support clips. Ensure it sits securely and is level.
Add hooks: Insert hooks (1007) into pre-drilled holes on uprights as needed.
Attach end caps: Press end caps (1009) onto the top and bottom of each upright to cover sharp edges.

Tip: Do not fully tighten all screws until the entire frame is assembled and squared.

Wall Installation

Mounting the assembled frame securely is critical.

Choose location: Select a wall area free of pipes, wires, and obstructions. Use a stud finder if needed.
Mark bracket positions: Hold assembled frame against wall. Use a pencil to mark screw holes through bracket holes. Use a spirit level to ensure frame is perfectly horizontal.
Drill pilot holes: Using drill and correct bit, drill holes at marked spots. Depth should match wall anchor length.
Insert wall anchors: Gently tap anchors (1005) into holes with a hammer until flush with wall.
Mount frame: Align bracket holes with anchors. Insert screws (1006) and tighten firmly with screwdriver.
Final check: Gently pull on frame to test stability. Ensure all shelves are level and secure.

CAUTION! If drilling into tiles, use a tile drill bit to prevent cracking. For hollow walls, use appropriate hollow-wall anchors (not included).

Configuration Options

The BOAXEL system is adjustable for various needs.

Shelf height: Shelf supports can be placed at multiple positions on uprights (approx. every 3 cm).
Hook placement: Hooks can be inserted into any free hole on the uprights.
Orientation: Can be installed vertically or horizontally (brackets may need reorientation).
Multiple units: Units can be placed side-by-side for longer storage runs.

Idea: Use in entryway for keys/bags, in bathroom for towels, in kitchen for spices, or in garage for tools.

Weight Limits & Usage

Adhere to load limits for safety and longevity.

Component	Maximum Load	Notes
Single Wire Shelf	15 kg	Distribute weight evenly
Hook	2 kg	Do not hang heavy coats/bags
Entire System (3 shelves)	45 kg	Total combined weight
Wall Bracket Mounting Point	20 kg per bracket	Depends on wall material

Recommended items: Books, small plants, kitchen jars, towels, decorative items.
Avoid: Heavy appliances, large potted plants, excessive liquids.

Care & Maintenance

Proper care ensures long-lasting use.

Cleaning: Wipe with a soft, damp cloth. Use mild soap if needed. Dry immediately.
Avoid: Abrasive cleaners, scouring pads, bleach, or strong chemicals.
Periodic check: Every 6 months, check tightness of all screws and brackets. Retighten if loose.
Rust prevention: Although coated, avoid constant exposure to high humidity. Wipe off spills promptly.

CAUTION! Do not use excessive water or steam cleaners.

Troubleshooting

Problem	Possible Cause	Solution
Shelf wobbles or feels loose	Loose screws; wall anchors not secure; uneven wall	Tighten all screws; ensure anchors are properly set in wall; use shims behind bracket if wall is uneven.
Shelf not level	Support clips not at same height; wall mounting uneven	Adjust clips to same marked position; remount brackets using a spirit level.
Cannot insert screw into wall	Wrong drill bit; hitting hard material	Use correct drill bit for your wall (masonry, wood, etc.); apply steady pressure.
Parts don't fit together	Wrong part orientation; debris in slots	Check manual diagram for correct orientation; clean slots of any packaging debris.
Missing parts	Packaging error	Contact IKEA customer service with product number (304.495.88) and receipt.

Note: Do not modify parts. Use only original hardware.

Warranty & Support

IKEA limited warranty applies. See IKEA terms and conditions for details.

Warranty period: As per local IKEA policy (typically 1-10 years depending on region).
Coverage: Covers material and manufacturing defects under normal household use.
Not covered: Damage from improper assembly, installation, misuse, accidents, or lack of maintenance.
Support: For missing parts, assembly help, or warranty claims:
Visit: www.ikea.com
Contact your local IKEA store.
Phone: See contact details on your receipt or IKEA website.

Product Name: BOAXEL
Article Number: 304.495.88
Design and Quality: IKEA of Sweden