IKEA BOAXEL 004.487.31 Wall Upright instructions manual

The IKEA BOAXEL 004.487.31 is a wall-mounted upright component designed for creating customizable shelving and storage systems. It serves as the primary vertical support for attaching shelves, baskets, and other accessories. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Required 3. Installation Instructions 4. Specifications 5. Mounting & Leveling 6. Attaching Shelves & Accessories 7. Weight Limits & Load Distribution 8. Safety & Precautions 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Wall Upright (vertical rail), Mounting Brackets, Screws and Wall Plugs, Leveling Tool.

FeatureDescription
Wall UprightPrimary vertical rail with pre-drilled holes for shelf brackets
Mounting BracketsHardware for securing the upright to the wall
Screws and Wall PlugsIncluded fasteners for different wall types (concrete, drywall, wood)
Leveling ToolOptional accessory for ensuring the upright is perfectly vertical
Pre-drilled HolesStandard spacing for attaching IKEA BOAXEL shelves and accessories
MaterialSteel construction with powder-coated finish
AdjustabilityShelves can be repositioned at different heights
CompatibilityDesigned to work with all BOAXEL shelving system components
FinishWhite powder-coated surface
PackagingIncludes all necessary hardware and instructions

Parts & Tools Required

Inspect all contents before beginning installation.

  1. Included Parts: Wall Upright (1), Mounting Brackets (2-4), Screws (appropriate quantity), Wall Plugs, Instruction Manual.
  2. Required Tools (Not Included): Drill with appropriate bits, Level, Pencil, Tape Measure, Screwdriver or Drill Driver, Stud Finder (recommended).
  3. Optional: Helper for holding components during installation.

WARNING! Use appropriate safety equipment (safety glasses) when drilling. Ensure you have identified wall type and any electrical wiring/pipes before drilling.

Installation Instructions

Follow these steps carefully for secure mounting.

  1. Plan Placement: Decide on location considering weight distribution and accessibility. Use stud finder to locate wall studs if possible.
  2. Mark Positions: Hold upright against wall at desired height. Use level to ensure it's perfectly vertical. Mark screw hole positions with pencil.
  3. Drill Pilot Holes: Drill holes at marked positions using appropriate drill bit for your wall type. Insert wall plugs if not mounting into studs.
  4. Mount Brackets: Attach mounting brackets to wall using provided screws. Ensure they are level and secure.
  5. Attach Upright: Place upright onto mounted brackets. Secure with additional screws through upright into brackets.
  6. Final Check: Verify upright is secure and perfectly vertical. Apply gentle pressure to test stability.

CAUTION! The upright must be mounted to a structurally sound wall. Do not mount to drywall alone without proper anchors. Maximum load capacity depends on wall type and mounting method.

Specifications

Mounting & Leveling

Proper leveling is critical for system stability and appearance.

Single Upright: Use level to ensure vertical alignment. Mark at top and bottom before drilling.

Multiple Uprights: For systems requiring multiple uprights:

  1. Install first upright perfectly vertical.
  2. Measure exact distance for second upright per shelf length requirements.
  3. Use level across both uprights to ensure they are in same plane.
  4. Check vertical alignment of each upright individually.

Tools: Use 4-foot level for best results. Laser level recommended for multiple upright installations.

Tip: For long spans, consider adding center support or additional uprights.

Attaching Shelves & Accessories

BOAXEL system uses simple bracket attachment method.

  1. Select Height: Determine desired shelf height based on intended use.
  2. Insert Brackets: Slide shelf brackets into pre-drilled holes on upright at chosen height.
  3. Secure Brackets: Most brackets click into place; some may require tightening with screwdriver.
  4. Place Shelf: Rest shelf on brackets. Some shelves may require additional securing.
  5. Add Accessories: Attach baskets, hooks, or other accessories to brackets or directly to upright.

Tip: Start with top shelf installation and work downward for easier access. Ensure all brackets are fully engaged before loading.

Weight Limits & Load Distribution

Understanding load capacity ensures safe operation.

Wall TypeMaximum Load per UprightRecommended Anchors
Wood Studs (16" centers)55 lbs (25 kg)Wood screws into studs
Concrete/Brick55 lbs (25 kg)Concrete anchors
Drywall with Anchors30 lbs (13.5 kg)Heavy-duty toggle bolts
Plaster Walls25 lbs (11 kg)Specialty plaster anchors

Load Distribution: Distribute weight evenly across brackets. Heavier items should be placed on lower shelves. Avoid concentrating heavy items in one area.

WARNING! Exceeding weight limits can cause wall damage, component failure, or injury. When in doubt, consult a professional.

Safety & Precautions

Closed Captions: Enable in DVD setup (On/Off). Parental Controls: Block by movie/TV ratings in FEATURES menu (password 9999).

  1. Mounting Surface: Only mount to structurally sound walls. Avoid mounting to hollow doors, thin partitions, or unstable surfaces.
  2. Child Safety: Do not allow children to climb on shelves. Secure heavy items that could fall.
  3. Regular Inspection: Periodically check all mounting points for tightness and signs of stress.
  4. Earthquake Areas: Consider additional securing methods in seismic zones.
  5. Electrical Safety: Keep away from electrical outlets and wiring when drilling.

EMERGENCY: If upright becomes loose or wall shows signs of damage, immediately remove all weight and contact professional.

Care & Maintenance

Regular care ensures longevity and appearance.

  1. Cleaning: Wipe with damp cloth and mild detergent. Dry immediately. Do not use abrasive cleaners.
  2. Rust Prevention: If finish becomes damaged, touch up with matching paint to prevent rust.
  3. Tightening: Check screw tightness every 6 months or if system feels unstable.
  4. Load Adjustment: Redistribute weight if shelves show signs of sagging.
  5. Relocation: When removing, fill holes appropriately. New location may require different mounting hardware.

CAUTION! Do not use steel wool or harsh chemicals. Avoid excessive moisture.

Warranty Information

IKEA BOAXEL products come with a 10-year limited warranty. This warranty covers defects in materials and workmanship under normal household use. It does not cover damage from improper installation, accident, modification, commercial use, or exposure to extreme conditions. For warranty claims, contact IKEA customer service with proof of purchase. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Upright not levelImproper installation or wall unevenRemove and reinstall using level; shim if wall uneven
Shelves saggingExcess weight or improper bracket placementReduce load; add additional brackets or center support
Upright feels looseInsufficient mounting or wrong anchorsReinforce with additional brackets; use appropriate wall anchors
Brackets won't stay in holesWorn holes or incorrect bracketsMove to different holes; ensure using correct BOAXEL brackets
Difficulty attaching accessoriesCompatibility issue or incorrect techniqueVerify accessory compatibility; follow specific accessory instructions
Wall damage around mountsOverloading or improper installationImmediately reduce load; consult professional for repair and reinforcement

Professional Help: If problems persist or you're unsure about wall integrity, consult a professional installer or contractor.

Customer Service: IKEA Customer Support: 1-888-888-4532; www.ikea.com

IKEA BOAXEL 004.487.31 Wall Upright instructions manual © - All Rights Reserved 2025