IKEA BLÅSVERK 305.209.28 Table Lamp instructions manual

The IKEA BLÅSVERK 305.209.28 is a modern table lamp featuring a glass shade and metal base, designed for ambient lighting. It operates with a maximum 7W E14 LED bulb (not included), includes an in-line switch on the power cord, and requires assembly. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Assembly Instructions 5. Installation & Setup 6. Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Glass shade, Metal base, E14 bulb socket, In-line switch on cord.

Feature	Description
Material	Glass shade, Metal base
Bulb Type	Max 7W E14 LED bulb (not included)
Switch	In-line switch on power cord
Cord Length	1.5 meters (approx.)
Design	Modern, ambient lighting
Assembly Required	Yes - simple tool-free assembly

Package Contents

Unpack and verify all parts are present before assembly.

Glass lamp shade (1 piece)
Metal lamp base (1 piece)
E14 bulb socket with pre-attached cord (1 set)
Instruction manual (this document)

NOTE: LED bulb not included. Use only E14 base, max 7W LED bulb.

Safety Information

WARNING! To reduce risk of fire, electric shock, or injury:

Unplug lamp before assembly, cleaning, or bulb replacement.
Use only with specified E14 LED bulb, max 7W.
Do not operate if cord or plug is damaged.
Place on stable, level surface away from edges.
Keep away from water, moisture, and heat sources.
This lamp is for indoor use only.

CAUTION! Glass shade is fragile. Handle with care during assembly.

Assembly Instructions

Follow steps in order. Ensure all parts are clean and dry.

Prepare Base: Place metal base on a soft, flat surface to prevent scratches.
Attach Socket: Insert the bulb socket into the top opening of the metal base. Push down firmly until it clicks into place.
Attach Shade: Carefully place the glass shade over the bulb socket. Align it evenly and press down gently until it rests securely on the base.
Final Check: Ensure the shade is straight and all connections are snug. Do not overtighten.

Tip: Assemble on a carpet or towel to protect glass from hard surfaces.

Installation & Setup

Choose a location near a power outlet, on a stable table or shelf.
Insert an E14 LED bulb (max 7W) into the socket. Turn bulb clockwise until secure.
Plug the power cord into a standard 120V AC wall outlet.
Use the in-line switch on the cord to turn the lamp ON/OFF.

WARNING! Do not use bulbs exceeding 7W, as this may cause overheating.

Operation

Operation is simple via the in-line switch.

To Turn On: Press the switch to the "I" position.
To Turn Off: Press the switch to the "O" position.
Bulb Replacement: Always unplug lamp first. Allow bulb to cool if recently used. Unscrew old bulb, insert new E14 LED bulb (max 7W).

NOTE: This lamp does not have a dimmer function. Use only with compatible non-dimmable LED bulbs unless otherwise stated.

Care & Maintenance

Unplug lamp before any cleaning.

Glass Shade: Wipe with a soft, dry cloth. For smudges, use a slightly damp cloth and dry immediately. Do not use abrasive cleaners.
Metal Base: Wipe with a soft, dry cloth. Avoid chemical cleaners.
Cord: Wipe with dry cloth. Do not immerse in water.

CAUTION! Never spray liquids directly onto the lamp. Store in a dry place when not in use.

Specifications

Product Name: BLÅSVERK Table Lamp
Article Number: 305.209.28
Dimensions (approx.): Height: 30 cm, Width: 18 cm
Material: Shade: Glass, Base: Metal
Bulb Socket: E14
Max Power: 7W LED
Cord Length: 1.5 m
Voltage: 120V AC, 60Hz
Weight: 1.2 kg (assembled)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Switch off / Bulb issue	Ensure plug is in outlet; switch is ON ("I"); try a known-working E14 LED bulb.
Flickering light	Loose bulb / Incompatible bulb	Turn off, unplug, and tighten bulb. Ensure bulb is max 7W LED.
Lamp gets hot	Bulb wattage too high	Use only recommended 7W LED bulb. Unplug and allow to cool.
Glass shade loose	Not fully seated during assembly	Unplug lamp. Gently press shade down onto base until secure.
No power at all	Faulty outlet / Damaged cord	Test outlet with another device. Inspect cord for damage. Do not use if cord is damaged.

Reset: Unplug for 1 minute, then plug back in.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details. For product support, assembly help, or spare parts:

Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (305.209.28) ready.

Disposal: Dispose of according to local electronic waste regulations. Do not dispose of with household trash.