IKEA BLÅKULLEN 605.057.14 Bed Frame instructions manual

The IKEA BLÅKULLEN 605.057.14 is a sturdy and stylish bed frame designed for durability and comfort. It features a slatted bed base for mattress support, underbed storage options, and a modern design that fits various room aesthetics. Below are key sections for safety, assembly, care, and troubleshooting.

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Bed frame sides (headboard and footboard), Side rails, Slatted bed base, Support legs, Connector bolts, screws, and Allen key.

Safety Instructions

Read all instructions before assembly. Ensure a safe environment.

1. Assembly requires two people due to size and weight.
2. Assemble on a soft surface (e.g., carpet) to avoid scratches.
3. Keep small parts away from children to prevent choking hazards.
4. Check all bolts and connections are tight before use.
5. Do not exceed the maximum weight limit (see Specifications).

WARNING! Improper assembly can lead to instability and injury. Follow steps precisely.

Assembly Steps

Estimated assembly time: 45-60 minutes. Follow numerical order on included diagram.

1. Attach support legs to headboard and footboard using provided screws.
2. Connect side rails to headboard using M8 bolts; hand-tighten initially.
3. Attach footboard to opposite ends of side rails similarly.
4. Place slatted bed base onto side rail supports; ensure it sits evenly.
5. Secure slats with included clips or screws if provided.
6. Tighten all bolts firmly with Allen key, but do not over-tighten.
7. Check stability by gently shaking the frame; adjust legs if wobbling.

CAUTION! Use correct bolts for each step; mixing parts can damage the frame.

Specifications

• Model: BLÅKULLEN 605.057.14
• Bed Size: Available in Twin, Full, Queen, King (specify purchased size).
• Material: Particleboard, fiberboard, plastic, steel.
• Finish: White, black-brown, or other as per variant.
• Max Weight Capacity: 600 lbs (272 kg) distributed evenly.
• Height (to top of mattress): Approx. 24 inches (61 cm).
• Underbed Clearance: 8 inches (20 cm) for storage.
• Tools Required: Allen key (included); Phillips screwdriver recommended.

Adjusting & Leveling

If bed wobbles or is uneven, adjust support legs.

Leg Adjustment: Turn legs clockwise to raise, counterclockwise to lower. Use a level on side rails to ensure even height.

Slat Alignment: Ensure slats are evenly spaced and secured; gaps can cause mattress sagging.

Re-tightening: Check bolt tightness after 2 weeks of use; wood may settle.

Care & Maintenance

Clean with a dry or slightly damp cloth; avoid harsh chemicals.

1. Dust regularly with a soft cloth.
2. For stains, use mild soap solution; dry immediately.
3. Do not place near direct heat sources or high humidity.
4. Inspect bolts periodically for looseness.

Tip: Use felt pads under legs to protect flooring.

Disassembly & Moving

To disassemble, reverse assembly steps.

1. Remove mattress and slatted base.
2. Loosen bolts in reverse order using Allen key.
3. Detach side rails, then headboard/footboard.
4. Pack parts in original packaging if available.
5. When moving, lift frame—do not drag to avoid damage.

WARNING! Label parts during disassembly for easier reassembly.

Warranty Information

IKEA limited warranty covers manufacturing defects for 10 years from purchase date. Warranty does not cover damage from improper assembly, accidents, or normal wear. Keep receipt as proof of purchase. For claims, contact IKEA customer service with model number and receipt.

Troubleshooting

Support: For missing parts or further assistance, visit IKEA website or call 1-888-888-4532. Reference model BLÅKULLEN 605.057.14.