IKEA BLECKBERGET 804.830.56 Swivel Chair instructions manual

The IKEA BLECKBERGET 804.830.56 is a modern swivel chair designed for comfort and functionality in home office or study environments. It features a breathable mesh back, adjustable seat height, 360-degree swivel base with smooth-rolling casters, and a sturdy five-point base for stability. The chair supports a maximum weight of 110 kg (243 lbs). Below are key sections for safety, assembly, adjustment, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Instructions 3. Assembly Steps 4. Adjustments & Features 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Tools Included

Ensure all parts are present before starting assembly.

Part NameQuantityDescription
Seat with attached mechanism1Main seat unit with adjustment controls
Backrest1Mesh backrest with mounting brackets
Gas lift cylinder1For height adjustment
Star base1Five-arm plastic base
Casters (wheels)5Plastic casters for smooth movement
Screws4For attaching backrest to seat
Allen key1Tool provided for assembly
Instruction manual1This document

Safety Instructions

Read all instructions before assembly and use.

  1. Assemble on a soft surface to avoid scratching parts.
  2. Do not overtighten screws; use provided tool only.
  3. Ensure all connections are secure before use.
  4. Maximum user weight: 110 kg (243 lbs). Do not exceed.
  5. Keep chair away from heat sources and direct sunlight.
  6. Do not stand on the chair or use as a step ladder.

WARNING! Chair is heavy; lift with care. Use two people for handling during assembly.

Assembly Steps

Estimated assembly time: 15-20 minutes.

  1. Attach casters to base: Push each caster firmly into the holes on the star base until they click into place.
  2. Insert gas lift into base: Place the gas lift cylinder into the center hole of the base, pressing down until secure.
  3. Place seat onto gas lift: Align the hole on the bottom of the seat with the gas lift and press down firmly until it clicks.
  4. Attach backrest: Position the backrest against the seat back. Insert and tighten the 4 screws using the provided Allen key.
  5. Final check: Ensure all parts are firmly connected. Test the chair's stability before sitting.

Tip: Do not force parts. If something doesn't fit, check orientation.

Adjustments & Features

Note: The chair does not have tilt or lumbar adjustment functions.

Care & Maintenance

To maintain appearance and function:

  1. Fabric/Mesh: Vacuum regularly. Clean with a damp cloth and mild detergent if needed. Do not soak.
  2. Plastic parts: Wipe with a damp cloth. Avoid abrasive cleaners.
  3. Casters: Remove hair and debris periodically to ensure smooth rolling.
  4. Mechanism: Do not lubricate. Keep free of dust.

CAUTION! Do not use bleach, solvents, or steam cleaners. Keep away from direct heat sources.

Specifications

Troubleshooting

IssuePossible CauseSolution
Chair wobblesUneven floor; loose connectionsCheck that all screws are tight; ensure floor is level.
Height adjustment not workingLever not engaged; mechanism stuckPull lever fully up while standing off chair; ensure no obstructions.
Casters not rolling smoothlyDebris in wheelsRemove casters and clean; ensure floor surface is suitable.
Backrest feels looseScrews not tightenedTighten the 4 backrest screws with Allen key.
Gas lift sinks slowlyNormal wear over timeThis may occur after extended use; contact IKEA support if excessive.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty booklet included with purchase or available online for full terms and duration.

For assembly help, missing parts, or product support:

Recycling: At end of life, disassemble and recycle materials according to local regulations.

IKEA BLECKBERGET 804.830.56 Swivel Chair instructions manual © - All Rights Reserved 2025