IKEA BLÖTSNÖ 504.015.09 String Light Instructions Manual
The IKEA BLÖTSNÖ 504.015.09 is a decorative indoor string light set with 20 warm white LED lights, a 5-meter cable, and a plug-in transformer. Designed for indoor use, it features a fixed lighting effect and is intended for decorative purposes. Below are key sections for safety, features, installation, operation, care, and troubleshooting.
Features at a Glance
Key components: 20 warm white LED bulbs, 5-meter main cable, plug-in transformer, and hanging clips.
| Feature | Description |
| LED Lights | 20 energy-efficient, warm white LEDs with long lifespan |
| Cable Length | 5 meters total length for flexible placement |
| Transformer | Plug-in power supply (input: 100-240V AC) |
| Lighting Effect | Fixed, non-dimmable decorative lighting |
| Indoor Use | Designed for indoor environments only |
| Hanging Clips | Included for easy mounting on walls or surfaces |
| Plug Type | Standard plug for your region |
Safety Information
Read all instructions before installation and use.
- FOR INDOOR USE ONLY: Do not use outdoors or in damp/wet locations.
- Ensure the transformer plug and outlet are easily accessible.
- Do not cover the transformer or lights with fabrics or other materials.
- Keep away from heat sources, open flames, and flammable materials.
- Do not attempt to repair or modify the product. Contact IKEA for service.
- This product is not a toy. Keep out of reach of children and pets.
- Unplug the transformer before cleaning or when not in use for extended periods.
WARNING! Risk of electric shock or fire if misused. Always follow local electrical safety regulations.
Package Contents
Before starting, verify all parts are included:
- String light with 20 integrated LED bulbs
- Plug-in transformer (1 unit)
- Package of hanging clips (10 pieces)
- This instruction manual
Note: If any item is missing or damaged, do not use the product. Contact your nearest IKEA store.
Installation & Setup
Follow these steps for safe and proper installation.
- Plan Your Layout: Decide where to hang the lights. Ensure the transformer can reach a power outlet.
- Prepare the Area: Ensure the surface is clean, dry, and suitable for attaching clips.
- Attach Hanging Clips: Use the provided clips to secure the cable along your desired path. Space clips approximately every 50 cm for even support.
- Connect Power: Plug the transformer into a standard indoor electrical outlet. Do not use extension cords unless rated for the product's power.
- Test the Lights: Once plugged in, all 20 LEDs should illuminate. If not, see Troubleshooting section.
CAUTION! Do not stretch or pull the cable tightly. Avoid sharp bends around corners.
Operation
Operation is simple: plug in to turn on, unplug to turn off.
- The lights have a fixed on/off state controlled by the power outlet.
- For convenience, plug the transformer into a switched outlet or a separate switch adapter.
- The LEDs are designed for continuous decorative use but turning them off when not needed saves energy.
Note: The lights are not dimmable and do not have a separate controller.
Specifications
- Product Name: BLÖTSNÖ
- Article Number: 504.015.09
- Light Source: 20 integrated warm white LEDs (non-replaceable)
- Cable Length: 5 meters
- Input Voltage (Transformer): 100-240V AC, 50/60Hz
- Output Voltage: Low voltage DC (safe for indoor use)
- Power Consumption: Low energy usage (exact wattage specified on transformer label)
- Color Temperature: Warm white (approx. 2700K)
- IP Rating: Not rated for moisture or outdoor use
- Estimated LED Lifespan: Up to 25,000 hours under normal use
Care & Maintenance
Proper care ensures longevity and safe operation.
- Cleaning: Always unplug the transformer first. Wipe the cable and LEDs with a dry or slightly damp cloth. Do not immerse in water or use cleaning chemicals.
- Storage: If storing, loosely coil the cable without sharp bends. Store in a cool, dry place.
- Bulb Replacement: The LEDs are integrated and cannot be replaced individually. If a section fails, the entire string may need replacement.
CAUTION! Never pull the cable to unplug the transformer. Grasp the plug firmly.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
| Lights do not turn on | No power to outlet / Transformer not plugged in | Check if outlet works with another device. Ensure transformer is fully plugged in. |
| Partial lights out | LED failure or connection issue | Check for visible damage to the cable. If a section is dark, the product may be faulty. |
| Transformer is warm | Normal operation / Overheating | Some warmth is normal. If it is very hot, unplug immediately and ensure it is not covered. |
| Flickering lights | Loose connection / Faulty outlet | Check plug connection. Try a different outlet. If problem persists, discontinue use. |
| Cable feels damaged | Physical wear or pinch | Unplug immediately. Do not use if cable insulation is cut, cracked, or exposed. |
Important: For any electrical fault, do not attempt to repair. Contact IKEA support.
Warranty & Support
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided in store or online for details.
For assistance:
- Visit the IKEA website: www.ikea.com
- Contact your local IKEA customer support center.
- Have the article number (504.015.09) and receipt ready when requesting service.
Disposal: At end of life, do not dispose with household waste. Recycle according to local regulations for electronic products.
IKEA BLÖTSNÖ 504.015.09 String Light Instructions Manual © - All Rights Reserved 2025